(714) 362-5810 - Tech Support
(714) 362-2399 - Fax
(714) 362-2396 - Fax on Demand
(714) 362-5822 - BBS
QLWin@smithmicro.com - Email Windows Support
QLDOS@smithmicro.com - Email Dos Support
bbs.smithmicro.com - Telnet BBS
GO SMITHMICRO - CompuServe

Quicklink II v3.0.2 for DOS:
DIP Switches: 3, 5, and 8 DOWN (ON)

CHANGE PORT: Pull down the Setup menu by typing "ALT-S" and select "Modem Setup". Set the Port to the one your modem is on.

CHANGE IRQ: Pull down the Setup menu by typing "ALT-S", selecting "Modem Setup", and then typing "ALT-I". Change the IRQ to match what your modem is set to.

INIT STRING: Pull down the Setup menu by typing "ALT-S", then selecting "Modem Setup". Change the init string to "AT&F&B1&H1&R2&A3&K3X4S0=0".

TERMINAL MODE: The program starts in terminal mode.

Quicklink II v1.4 for Windows
DIP Switches: 3, 5, 8 DOWN (ON)

CHANGE PORT: Pull down the Setup menu and select "Modem Setup". Set the port setting under "Com Port:".

CHANGE IRQ: This program uses the settings in the Windows Control Panel.

INIT STRING: Pull down the Setup menu by typing "ALT-S" and select "Modem Setup". Change init string to "AT&F&B1&H1&R2&A3&K3X4S0=0S7=90S36=0".

TERMINAL MODE: The program starts in terminal mode.