|
|
|
|
MIB Information: d3iStat
1.3.6.1.4.1.429.1.43.3
MIB Information: d3iStatTable
1.3.6.1.4.1.429.1.43.3.1
not-accessible
Description: The Status table contains an entry for each DS3 card in the chassis.
MIB Information: d3iStatEntry
1.3.6.1.4.1.429.1.43.3.1.1
not-accessible
Description: There is one entry for each DS3 card in the chassis.
MIB Information: d3iStatIndex
1.3.6.1.4.1.429.1.43.3.1.1.1
mandatory read-only
Description: A unique value for each DS3 card in the chassis. The value of this object matches the value of the index of the corresponding DS3 card's entry in the entity table of the chassis MIB.
Settings: INTEGER
MIB Information: d3iStatSigPBusTxPktOkCnt
1.3.6.1.4.1.429.1.43.3.1.1.2
mandatory read-only
Description: The number of successful packets transmitted over the signaling packet bus connection.
Settings: Counter
MIB Information: d3iStatSigPBusTxPktFldCnt
1.3.6.1.4.1.429.1.43.3.1.1.3
mandatory read-only
Description: The number of packets failed to transmit over the signaling packet bus connection.
Settings: Counter
MIB Information: d3iStatSigPBusRxPktOkCnt
1.3.6.1.4.1.429.1.43.3.1.1.4
mandatory read-only
Description: The number of successful packets received over the signaling packet bus connection.
Settings: Counter
MIB Information: d3iStatSigPBusRxPktRjtCnt
1.3.6.1.4.1.429.1.43.3.1.1.5
mandatory read-only
Description: The number of packets rejected by the DS3 NAC module message handling application.
Settings: Counter
MIB Information: d3iStatSigPBusConnState
1.3.6.1.4.1.429.1.43.3.1.1.6
mandatory read-only
Description: The state of the signaling packet bus connection to the JHDM NAC. The loopback state means the DS3 has been requested over the signaling packet bus link to loopback all of its signaling channel received data. It will stay in this state until the DS3 sends an call control message to remove the loopback on this signaling connection.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = closed
(2) = opening
(3) = opened
(4) = configuring
(5) = ready
(6) = closing
(7) = loopback
MIB Information: d3iStatEnfasLinkDownCause
1.3.6.1.4.1.429.1.43.3.1.1.7
mandatory read-only
Description: The reason for the E-NFAS signaling link going down. DisCmd: A DISC command was received over the packet bus signaling link. NACRemoval: A chassis awareness message indicated that the NAC connected to the E-NFAS link has been removed.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = none
(2) = discCmd
(3) = nacRemoval
MIB Information: d3iStatPbClock
1.3.6.1.4.1.429.1.43.3.1.1.8
mandatory read-only
Description: This object defines the current status of the packet bus clock.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = notSupported
(2) = clockMaster
(3) = clockSlave
(4) = noClockPresent
MIB Information: d3iStatTdmClock
1.3.6.1.4.1.429.1.43.3.1.1.9
mandatory read-only
Description: This object defines the current status of the TDM bus system clock.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = notSupported
(2) = clockMaster
(3) = clockSlave
(4) = noClockPresent
MIB Information: d3iStatOwnCardState
1.3.6.1.4.1.429.1.43.3.1.1.10
mandatory read-only
Description: This object represents the current state of own card.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = inService
(2) = standby
(3) = outOfService
MIB Information: d3iStatOtherCardState
1.3.6.1.4.1.429.1.43.3.1.1.11
mandatory read-only
Description: This object represents the current state of other card.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = inService
(2) = standby
(3) = outOfService
MIB Information: d3iStatActiveTimingRef
1.3.6.1.4.1.429.1.43.3.1.1.12
mandatory read-only
Description: This object represents active timing reference.
Settings: INTEGER
Syntax Ref. Type: ENUM
(128) = spanBITS
(129) = internal
(130) = throughTDM
(131) = holdOver
(1) = spanLine1
(2) = spanLine2
(3) = spanLine3
(4) = spanLine4
(5) = spanLine5
(6) = spanLine6
(7) = spanLine7
(8) = spanLine8
(9) = spanLine9
(10) = spanLine10
(11) = spanLine11
(12) = spanLine12
(13) = spanLine13
(14) = spanLine14
(15) = spanLine15
(16) = spanLine16
(17) = spanLine17
(18) = spanLine18
(19) = spanLine19
(20) = spanLine20
(21) = spanLine21
(22) = spanLine22
(23) = spanLine23
(24) = spanLine24
(25) = spanLine25
(26) = spanLine26
(27) = spanLine27
(28) = spanLine28
MIB Information: d3iStatFrontPanelDisplay
1.3.6.1.4.1.429.1.43.3.1.1.13
mandatory read-only
Description: This object represents the front panel display of the DS3 card.
Settings: DisplayString
Syntax Ref. Type: SIZE
0 = 4
Copyright © 2000 3Com Corporation.