|
|
|
|
MIB Information: d3iTe
1.3.6.1.4.1.429.1.43.5
MIB Information: d3iTeTable
1.3.6.1.4.1.429.1.43.5.1
not-accessible
Description: The trap table containing an enable for each that the card is capable of generating. Some of these events occur often and traps may flood the network if care is not taken to avoid such conditions. These traps should be enabled sparingly.
MIB Information: d3iTeEntry
1.3.6.1.4.1.429.1.43.5.1.1
not-accessible
Description: There is one entry for each DS3 card in the chassis.
MIB Information: d3iTeIndex
1.3.6.1.4.1.429.1.43.5.1.1.1
mandatory read-only
Description: A unique value for each DS3 card in the chassis. The value of this object matches the value of the index of the corresponding DS3 card's entry in the entity table of the chassis MIB.
Settings: INTEGER
MIB Information: d3iTePbActive
1.3.6.1.4.1.429.1.43.5.1.1.2
mandatory read-write
Description: Enables the Packet Bus Active Trap. Default is disableAll(2).
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enableTrap
(2) = disableAll
(3) = enableLog
(4) = enableAll
MIB Information: d3iTePbLost
1.3.6.1.4.1.429.1.43.5.1.1.3
mandatory read-write
Description: Enables the Packet Bus lost Trap. Default is disableAll(2).
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enableTrap
(2) = disableAll
(3) = enableLog
(4) = enableAll
MIB Information: d3iTePbClockLossEvent
1.3.6.1.4.1.429.1.43.5.1.1.4
mandatory read-write
Description: This object is used to disable the ability for a NAC to report when the packet bus clock has been lost. Defaule is diableAll(2).
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enableTrap
(2) = disableAll
(3) = enableLog
(4) = enableAll
MIB Information: d3iTePbClockRestoreEvent
1.3.6.1.4.1.429.1.43.5.1.1.5
mandatory read-write
Description: This object is used to disable the ability for a NAC to report when the packet bus clock has been restored. Defaule is diableAll(2).
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enableTrap
(2) = disableAll
(3) = enableLog
(4) = enableAll
MIB Information: d3iTeTdmClockLost
1.3.6.1.4.1.429.1.43.5.1.1.6
mandatory read-write
Description: Enables generation of an SNMP trap upon detection of TDM bus system clock lost. Default is disableAll(2).
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enableTrap
(2) = disableAll
(3) = enableLog
(4) = enableAll
MIB Information: d3iTeTdmClockRestored
1.3.6.1.4.1.429.1.43.5.1.1.7
mandatory read-write
Description: Enables generation of an SNMP trap upon detection of TDM bus system clock restored. Default is disableAll(2).
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enableTrap
(2) = disableAll
(3) = enableLog
(4) = enableAll
MIB Information: d3iTeEnfasLinkUp
1.3.6.1.4.1.429.1.43.5.1.1.8
mandatory read-write
Description: The trap enable for ENFAS link coming up trap. Default is disable.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enableTrap
(2) = disableAll
(3) = enableLog
(4) = enableAll
MIB Information: d3iTeEnfasLinkDown
1.3.6.1.4.1.429.1.43.5.1.1.9
mandatory read-write
Description: The trap enable for ENFAS link coming down trap. Default is disable.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enableTrap
(2) = disableAll
(3) = enableLog
(4) = enableAll
MIB Information: d3iTeSystemReset
1.3.6.1.4.1.429.1.43.5.1.1.10
mandatory read-write
Description: The trap enable disable for the DS3 system reset
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enableTrap
(2) = disableAll
(3) = enableLog
(4) = enableAll
MIB Information: d3iTeOwnCardStateChange
1.3.6.1.4.1.429.1.43.5.1.1.11
mandatory read-write
Description: This trap indicate if a trap message should be issued to report card state change.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enableTrap
(2) = disableAll
(3) = enableLog
(4) = enableAll
Copyright © 2000 3Com Corporation.