|
|
|
|
MIB Information: ds0
1.3.6.1.4.1.429.1.5
MIB Information: ds0CfgTable
1.3.6.1.4.1.429.1.5.1
not-accessible
Description: A table of operator definable parameters for each DS0
MIB Information: ds0CfgEntry
1.3.6.1.4.1.429.1.5.1.1
not-accessible
Description: There is one DS0 Configure entry for each DS0 timeslot in the chassis
MIB Information: ds0CfgDs1Index
1.3.6.1.4.1.429.1.5.1.1.1
mandatory read-only
Description: The index value which uniquely identifies the CSU to which this entry is applicable. The value of ds0CfgDs1Index matches the value of the index for the corresponding DS1 entity in the entity table of the chassis MIB.
Settings: INTEGER
MIB Information: ds0CfgDs0Index
1.3.6.1.4.1.429.1.5.1.1.2
mandatory read-only
Description: The index value which uniquely identifies the timeslot of the CSU to which this entry refers.
Settings: INTEGER
MIB Information: ds0CfgDs0Id
1.3.6.1.4.1.429.1.5.1.1.3
mandatory read-write
Description: An operator definable string useful for easy identification of a DS0 relative to the user application.
Settings: DisplayString
Syntax Ref. Type: SIZE
0 = 40
MIB Information: ds0CfgType
1.3.6.1.4.1.429.1.5.1.1.4
mandatory read-write
Description: Specifies the connection type for the particular DS0-Default=TDM(1).
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = tdm
(2) = spanLine1
(3) = spanLine2
MIB Information: ds0CfgTimeSlot
1.3.6.1.4.1.429.1.5.1.1.5
mandatory read-write
Description: The TDM time slot number used by the particular DS0.
Settings: INTEGER
Syntax Ref. Type: RANGE
0 = 256
MIB Information: ds0CfgState
1.3.6.1.4.1.429.1.5.1.1.6
mandatory read-write
Description: Specifies the state of the particular DS0.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = normal
(2) = busyOut
(3) = transparent
(4) = fracUnused
MIB Information: ds0StatTable
1.3.6.1.4.1.429.1.5.2
not-accessible
Description: USR's DS0 Status table contains various timeslot status information.
MIB Information: ds0StatEntry
1.3.6.1.4.1.429.1.5.2.1
not-accessible
Description: There is one entry in the DS0 Status table for each timeslot in the chassis.
MIB Information: ds0StatDs1Index
1.3.6.1.4.1.429.1.5.2.1.1
mandatory read-only
Description: The index value which uniquely identifies the CSU to which this entry is applicable. The value of ds0StatDs1Index matches the value of the index for the coresponding DS1 entity in the entity table of the chassis MIB.
Settings: INTEGER
MIB Information: ds0StatDs0Index
1.3.6.1.4.1.429.1.5.2.1.2
mandatory read-only
Description: The index value which uniquely identifies the timeslot of the CSU to which this entry refers. The value of ds0StatDs0Index matches the value of the index for the corresponding DS0 entity in the entity table of the chassis MIB.
Settings: INTEGER
MIB Information: ds0StatDs0
1.3.6.1.4.1.429.1.5.2.1.3
mandatory read-only
Description: This object indicates the current status of the specified timeslot. The status values change dynamically with system operation.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = other
(2) = idle
(3) = dialingIn
(4) = dialingOut
(5) = connectedIn
(6) = connectedOut
(7) = softBusyOut
(8) = hardBusyOut
(9) = autoBusyOut
(10) = mdmBusyOut
(11) = ignoringCalls
(12) = mdmCallIgnore
(13) = test
(14) = alarm
(15) = transparent
(16) = unavailable
(17) = transparentTest
(18) = unused
(19) = busyOut
(20) = fracUnused
(21) = passThru
MIB Information: ds0StatModem
1.3.6.1.4.1.429.1.5.2.1.4
mandatory read-only
Description: This object identifies whether the modem connected to the specified timeslot is available or not. A modem is considered available if the Dual T1 Card identifies the modem's presence on the TDM bus.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = other
(2) = unavailable
(3) = available
(4) = busyOut
(5) = transparentTest
(6) = unused
(7) = transparent
MIB Information: ds0StatAttemptTime
1.3.6.1.4.1.429.1.5.2.1.5
mandatory read-only
Description: This Object is the cumulative counter for ds0 call attempt time.
Settings: Counter
MIB Information: ds0CmdTable
1.3.6.1.4.1.429.1.5.3
not-accessible
Description: The DS0 Command table contains an entry for each of the manageable timeslots in the chassis. It provides a means through which to take specific actions on one or more timeslots in the chassis.
MIB Information: ds0CmdEntry
1.3.6.1.4.1.429.1.5.3.1
not-accessible
Description: There is one entry in the DS0 Command table per timeslot in the chassis.
MIB Information: ds0CmdDs1Index
1.3.6.1.4.1.429.1.5.3.1.1
mandatory read-only
Description: The index value which uniquely identifies the CSU to which this entry is applicable. The value of ds0CmdDs1Index matches the value of the index for the corresponding DS1 entity in the entity table of the chassis MIB.
Settings: INTEGER
MIB Information: ds0CmdDs0Index
1.3.6.1.4.1.429.1.5.3.1.2
mandatory read-only
Description: The index which uniquely identifies the timeslot of the specified CSU to which this entry is applicable.
Settings: INTEGER
0 = 8
MIB Information: ds0CmdReqId
1.3.6.1.4.1.429.1.5.3.1.4
mandatory read-only
Description: This object contains the value of the request-id field in the SNMP PDU which invoked the current or most recent command on this DS0 entity. If the request-id is unknown or undefined this object contains the zero value.
Settings: INTEGER
MIB Information: ds0CmdFunction
1.3.6.1.4.1.429.1.5.3.1.5
mandatory read-write
Description: This object contains a value that identifies the command being requested.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = noCommand
(2) = hardBusyOut
(3) = softBusyOut
(4) = restore
MIB Information: ds0CmdMgtStationId
1.3.6.1.4.1.429.1.5.3.1.3
mandatory read-write
Description: This object is a generic read-write variable that a Management Station (MS) can use to guarantee that the results from a given command are the results of a command issued by that specific MS. Each MS must SET a unique value to this object when doing commands and GET the value of this object together with ds0CmdReqId and ds0CmdResult to detect interference from other MSs.
Settings: OCTET STRING
Syntax Ref. Type: SIZE
(5) = disconnect
(6) = callIgnore
(7) = transparentTest
MIB Information: ds0CmdForce
1.3.6.1.4.1.429.1.5.3.1.6
mandatory read-write
Description: In some cases the DS0 entity may be in a state such that certain commands could adversely affect connections. In such cases a command request with ds0CmdForce not defined or set to noForce will result in a warning. If the operator elects to ignore such warnings ds0CmdForce can be set to force in a re-issued request and the command will be carried out regardless of its potentially hazzardous effects.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = force
(2) = noForce
MIB Information: ds0CmdParam
1.3.6.1.4.1.429.1.5.3.1.7
mandatory read-write
Description: This object contains parameters that are specific to the particular command being issued. In some cases there will be no additional parameters required.
Settings: OCTET STRING
Syntax Ref. Type: SIZE
0 = 24
MIB Information: ds0CmdResult
1.3.6.1.4.1.429.1.5.3.1.8
mandatory read-only
Description: This object contains the result of the most recently requested command or the value none(1) if no commands have been requested since the last reset.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = none
(2) = success
(3) = inProgress
(4) = notSupported
(5) = unAbleToRun
(6) = aborted
(7) = failed
MIB Information: ds0CmdCode
1.3.6.1.4.1.429.1.5.3.1.9
mandatory read-only
Description: The value of this object upon command completion indicates a further description of what went wrong if the command was unsuccessful.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = noError
(2) = unable
(6) = unrecognizedCommand
(8) = slotEmpty
(12) = noResponse
(20) = unsupportedCommand
(22) = deviceDisabled
(73) = pendingSoftwareDownload
MIB Information: ds0BulkAccessTable
1.3.6.1.4.1.429.1.5.4
not-accessible
Description: A table of parameters for each DS0 accessed in a bulk format
MIB Information: ds0BulkAccessEntry
1.3.6.1.4.1.429.1.5.4.1
not-accessible
Description: There is one bulk DS0 access for each DS1 in the chassis
MIB Information: ds0BulkAccessDs1Index
1.3.6.1.4.1.429.1.5.4.1.1
mandatory read-only
Description: The index value which uniquely identifies the CSU to which this entry is applicable. The value of ds0BulkAccessDs1Index matches the value of the index for the corresponding DS1 entity in the entity table of the chassis MIB.
Settings: INTEGER
MIB Information: ds0BulkAccessCfgTSS
1.3.6.1.4.1.429.1.5.4.1.2
mandatory read-only
Description: This object contains the ds0CfgType ds0CfgTimeSlot and ds0CfgState parameters for all the DS0's on the DS1
Settings: OCTET STRING
Syntax Ref. Type: SIZE
0 = 255
MIB Information: ds0BulkAccessStatDs0Modem
1.3.6.1.4.1.429.1.5.4.1.3
mandatory read-only
Description: This object contains the ds0StatDs0 and ds0StatModem parameters for all the DS0's on the DS1
Settings: OCTET STRING
Syntax Ref. Type: SIZE
0 = 255
MIB Information: ds0BulkAccessABStat
1.3.6.1.4.1.429.1.5.4.1.4
mandatory read-only
Description: This object contains the AB bit status
Settings: OCTET STRING
Syntax Ref. Type: SIZE
0 = 255
Copyright © 2000 3Com Corporation.