|
|
|
|
MIB Information: hdmEt
1.3.6.1.4.1.429.1.22.6
MIB Information: hdmEtTable
1.3.6.1.4.1.429.1.22.6.1
not-accessible
Description: Table of event thresholds used for setting up the modem to report events that can in turn be monitored by RMON.
MIB Information: hdmEtEntry
1.3.6.1.4.1.429.1.22.6.1.1
not-accessible
Description: Event Thresholds that are used by the modem and the NMC to qualify certain events.
MIB Information: hdmEtIndex
1.3.6.1.4.1.429.1.22.6.1.1.1
mandatory read-only
Description: Index into table used to identify the specific modem contains the unique value from the chassis mib entity table.
Settings: INTEGER
MIB Information: hdmEtIndex2
1.3.6.1.4.1.429.1.22.6.1.1.2
mandatory read-only
Description: Secondary index into table used to identify the the specific modem contains the unique value from the chassis mib entity table.
Settings: INTEGER
MIB Information: hdmEtDteIdleThresh
1.3.6.1.4.1.429.1.22.6.1.1.3
mandatory read-write
Description: Defines the length of time for the modem to wait before reporting a 'DTE transmit data idle' event. (There must be no activity on the DTE transmit line for the specified quantity of minutes.
Settings: INTEGER
Syntax Ref. Type: RANGE
0 = 255
MIB Information: hdmEtConnTimeLimit
1.3.6.1.4.1.429.1.22.6.1.1.4
mandatory read-write
Description: Defines the number of minutes that a call may be connected before triggering the 'connect timer limit' event. A value of zero for this limit means that no event is to be detected (ie. no time limit).
Settings: INTEGER
Syntax Ref. Type: RANGE
0 = 255
MIB Information: hdmEtBlerThresh
1.3.6.1.4.1.429.1.22.6.1.1.5
mandatory read-write
Description: Defines the number of BLERs that will be used to qualify the 'BLER count at threshold' event for a given call.
Settings: INTEGER
Syntax Ref. Type: RANGE
0 = 255
MIB Information: hdmEtFallbackThresh
1.3.6.1.4.1.429.1.22.6.1.1.6
mandatory read-write
Description: Defines the number of fallbacks at which the 'fallback count at threshold' event will be generated for a given call.
Settings: INTEGER
Syntax Ref. Type: RANGE
0 = 255
Copyright © 2000 3Com Corporation.