|
|
|
|
MIB Information: idt1Cfg
1.3.6.1.4.1.429.1.15.1
MIB Information: idt1CfgTable
1.3.6.1.4.1.429.1.15.1.1
not-accessible
Description: This table contains an entry for each of the manageable T1-PRI ISDN Cards in the chassis. It contains objects that reflect the current configuration of parameters that affect the operation of all the entities that reside on the given card.
MIB Information: idt1CfgEntry
1.3.6.1.4.1.429.1.15.1.1.1
not-accessible
Description: There is one Configuration table entry per T1-PRI ISDN Card in the chassis.
MIB Information: idt1CfgIndex
1.3.6.1.4.1.429.1.15.1.1.1.1
mandatory read-only
Description: A unique value for each card in the chassis. The value of idt1CfgIndex matches the value of the index for the corresponding card entity in the entity table of the chassis MIB.
Settings: INTEGER
MIB Information: idt1CfgAssgndISDNGateway
1.3.6.1.4.1.429.1.15.1.1.1.2
mandatory read-write
Description: Identifies the NAS chassis slot of the Gateway Card assigned to this T1-PRI ISDN card. Range 0-16. Default=0(none).
Settings: INTEGER
Syntax Ref. Type: RANGE
0 = 16
MIB Information: idt1CfgMdmCallsAllowedEna
1.3.6.1.4.1.429.1.15.1.1.1.3
mandatory read-write
Description: Indicates if modem calls are disabled/enabled for this T1-PRI ISDN Card. Default = enable(1).
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enable
(2) = disable
MIB Information: idt1CfgMdmRoutingMethod
1.3.6.1.4.1.429.1.15.1.1.1.4
mandatory read-write
Description: Defines the mechanism used for modem call routing for this T1-PRI ISDN Card.Default = roundRobin(2).
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = notSupported
(2) = roundRobin
(3) = firstAvailable
(4) = fixedAssignment
MIB Information: idt1CfgProjectSelectionR2
1.3.6.1.4.1.429.1.15.1.1.1.5
mandatory read-write
Description: This object lets user select E1 CAS project options. Default = mfcBkR2(3).
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = q421
(2) = r2
(3) = r2Korea
(4) = p7
(5) = r2Malaysia
(6) = r2Brazil
(7) = r2Mexico
(8) = r2China
(9) = r2LME
(10) = r2Venezuela
(255) = notApplicable
MIB Information: idt1CfgInfoMsgTimeOut
1.3.6.1.4.1.429.1.15.1.1.1.6
mandatory read-write
Description: This object sets the time out delay in seconds between INFO messages. This parameter is effective if overlap rx mode is enabled. Default = 12
Settings: INTEGER
Syntax Ref. Type: RANGE
0 = 255
MIB Information: idt1CfgInbDNISLength
1.3.6.1.4.1.429.1.15.1.1.1.7
mandatory read-write
Description: This objects sets the total number of digits expected in the inbound phone number. In the E1-PRI this only is effective when overlap rx mode is enabled. Default = 15
Settings: INTEGER
Syntax Ref. Type: RANGE
1 = 15
MIB Information: idt1CfgSelectCompanding
1.3.6.1.4.1.429.1.15.1.1.1.8
mandatory read-write
Description: Select companding (alaw or ulaw) for use with PCM encoded data. Default = alaw(1).
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = alaw
(2) = ulaw
(3) = useCountryCode
MIB Information: idt1CfgAniNumberEnable
1.3.6.1.4.1.429.1.15.1.1.1.9
mandatory read-write
Description: Allow the collection of A calling party phone number. This takes additional time and is not allowed for all switches. Default = disable(2).
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enable
(2) = disable
MIB Information: idt1CfgNoBptyMethod
1.3.6.1.4.1.429.1.15.1.1.1.10
mandatory read-write
Description: This object sets the method for handling an incoming call when the B-party (Called Number) is not found within the <inPhoneNum> table.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = analog
(2) = digital
(3) = unAllocatedNum
MIB Information: idt1CfgMaxISDNGwyCalls
1.3.6.1.4.1.429.1.15.1.1.1.11
mandatory read-write
Description: This object sets the maximum number of ISDN calls that can be terminated by the Gateway card. Default = 0.
Settings: INTEGER
Syntax Ref. Type: RANGE
0 = 255
Copyright © 2000 3Com Corporation.