|
|
|
|
MIB Information: itgwTrapEna
1.3.6.1.4.1.429.1.42.4
MIB Information: itgwTrapEnaTable
1.3.6.1.4.1.429.1.42.4.1
not-accessible
Description: This Trap Contains Enable/Disable for each trap type.
MIB Information: itgwTrapEnaEntry
1.3.6.1.4.1.429.1.42.4.1.1
not-accessible
MIB Information: itgwTrapEnaIndex
1.3.6.1.4.1.429.1.42.4.1.1.1
mandatory read-only
Description: This table contain enable/disable value for every trap in the Internet Telephony Gateway card in the chassis.
Settings: INTEGER
MIB Information: itgwTrapEnaItgwFailure
1.3.6.1.4.1.429.1.42.4.1.1.2
mandatory read-write
Description: This will enable/disable generation of the itgwFailure Trap.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enable
(2) = disable
MIB Information: itgwTrapEnaItgwRestore
1.3.6.1.4.1.429.1.42.4.1.1.3
mandatory read-write
Description: This will enable/disable generation of the itgwRestore Trap.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enable
(2) = disable
MIB Information: itgwTrapEnaItgwToLanCommFailure
1.3.6.1.4.1.429.1.42.4.1.1.4
mandatory read-write
Description: This will enable/disable generation of the itgwToLanCommFail Trap.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enable
(2) = disable
MIB Information: itgwTrapEnaItgwToGkCommFailure
1.3.6.1.4.1.429.1.42.4.1.1.5
mandatory read-write
Description: This will enable/disable generation of the itgwToGkCommFail Trap.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enable
(2) = disable
MIB Information: itgwTrapEnaItgwToPstnFailure
1.3.6.1.4.1.429.1.42.4.1.1.6
mandatory read-write
Description: This will enable/disable generation of the itgwToPstnFail Trap.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enable
(2) = disable
MIB Information: itgwTrapEnaItgwToBesFailure
1.3.6.1.4.1.429.1.42.4.1.1.7
deprecated read-write
Description: This will enable/disable generation of itgwToBesFailure trap.This trap enable/disable is no longer applicable since the trap is no longer supported.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enable
(2) = disable
MIB Information: itgwTrapEnaItgwToLanCommRestored
1.3.6.1.4.1.429.1.42.4.1.1.8
mandatory read-write
Description: This will enable/disable generation of itgwToLanCommRestored trap.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enable
(2) = disable
MIB Information: itgwTrapEnaItgwToGkCommRestored
1.3.6.1.4.1.429.1.42.4.1.1.9
mandatory read-write
Description: This will enable/disable generation of itgwToGkCommRestored trap.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enable
(2) = disable
MIB Information: itgwTrapEnaItgwToPstnRestored
1.3.6.1.4.1.429.1.42.4.1.1.10
mandatory read-write
Description: This will enable/disable generation of itgwToPstnRestored trap.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enable
(2) = disable
MIB Information: itgwTrapEnaItgwCallTermAbnormalFailure
1.3.6.1.4.1.429.1.42.4.1.1.11
mandatory read-write
Description: This will enable/disable generation of itgwCallTermAbnormalFailure trap.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enable
(2) = disable
MIB Information: itgwTrapEnaItgwCallTermNormalFailure
1.3.6.1.4.1.429.1.42.4.1.1.12
mandatory read-write
Description: This will enable/disable generation of itgwCallTermNormalFailure trap.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enable
(2) = disable
MIB Information: itgwTrapEnaItgwRegistration
1.3.6.1.4.1.429.1.42.4.1.1.13
mandatory read-write
Description: This will enable/disable generation of itgwRegistration trap.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enable
(2) = disable
MIB Information: itgwTrapEnaItgwDeregistration
1.3.6.1.4.1.429.1.42.4.1.1.14
mandatory read-write
Description: This will enable/disable generation of itgwDeregistration trap.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enable
(2) = disable
MIB Information: itgwTrapEnaItgwBesRestored
1.3.6.1.4.1.429.1.42.4.1.1.15
deprecated read-write
Description: This will enable/disable generation of itgwBesRestored trap.This object is no longer supported since the trap is no longer supported.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enable
(2) = disable
MIB Information: itgwTrapEnaItgwGkSwitchover
1.3.6.1.4.1.429.1.42.4.1.1.16
mandatory read-write
Description: This will enable/disable generation of the itgwGkSwitchover trap.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enable
(2) = disable
MIB Information: itgwTrapEnaItgwAcntFailure
1.3.6.1.4.1.429.1.42.4.1.1.17
mandatory read-write
Description: This will enable/disable generation of itgwAcntFailure trap.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enable
(2) = disable
MIB Information: itgwTrapEnaItgwAcntRestore
1.3.6.1.4.1.429.1.42.4.1.1.18
mandatory read-write
Description: This will enable/disable generation of itgwAcntRestored trap.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enable
(2) = disable
MIB Information: itgwTrapEnaItgwDirFailure
1.3.6.1.4.1.429.1.42.4.1.1.19
mandatory read-write
Description: This will enable/disable generation of itgwDirFailure trap.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enable
(2) = disable
MIB Information: itgwTrapEnaItgwDirRestore
1.3.6.1.4.1.429.1.42.4.1.1.20
mandatory read-write
Description: This will enable/disable generation of itgwDirRestored trap.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enable
(2) = disable
MIB Information: itgwTrapEnaItgwCallSetupFailure
1.3.6.1.4.1.429.1.42.4.1.1.21
mandatory read-write
Description: This will enable/disable generation of the itgwCallSetupFailure trap.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enable
(2) = disable
MIB Information: itgwTrapEnaItgwUnroutableCall
1.3.6.1.4.1.429.1.42.4.1.1.22
mandatory read-write
Description: This will enable/disable generation of the itgwUnroutableCall trap.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enable
(2) = disable
MIB Information: itgwTrapEnaItgwGwToGwFailure
1.3.6.1.4.1.429.1.42.4.1.1.23
mandatory read-write
Description: This will enable/disable generation of the itgwGwToGwFailure trap.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enable
(2) = disable
MIB Information: itgwTrapEnaItgwToGKSwitchOverFailure
1.3.6.1.4.1.429.1.42.4.1.1.24
mandatory read-write
Description: This will enable/disable generation of the itgwTogkSwitchOverFailure trap.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enable
(2) = disable
Copyright © 2000 3Com Corporation.