itgwEntityCfg

MIB Information: itgwEntityCfg
1.3.6.1.4.1.429.1.42.8

itgwEntityCfgTable

MIB Information: itgwEntityCfgTable
1.3.6.1.4.1.429.1.42.8.1
not-accessible

Description: This Configuration table contains ITGW Entity SpecificConfiguration parameters

itgwEntityCfgEntry

MIB Information: itgwEntityCfgEntry
1.3.6.1.4.1.429.1.42.8.1.1
not-accessible

itgwEntityCfgIndex

MIB Information: itgwEntityCfgIndex
1.3.6.1.4.1.429.1.42.8.1.1.1
mandatory read-only

Description: A unique value for each ITGW Entity.

Settings: INTEGER

itgwEntityCfgIngressGwAccNumber

MIB Information: itgwEntityCfgIngressGwAccNumber
1.3.6.1.4.1.429.1.42.8.1.1.2
mandatory read-write

Description: This specifies the Internet Telephony Gateway ingress access number.

Settings: DisplayString

Syntax Ref. Type: SIZE

0 = 16

itgwEntityCfgAutoHDSPInService

MIB Information: itgwEntityCfgAutoHDSPInService
1.3.6.1.4.1.429.1.42.8.1.1.3
mandatory read-write

Description: When this MIB object is enabled the Gateway will keep on trying to bring a HiPerDSP port in Service even if previous attempts failed. If it's disabled once an attempt to bring HDSP port in service fails the Gateway will not retry to bring it back up again. This may be desirable to avoid Packet Bus Time-out errors.

Settings: INTEGER

Syntax Ref. Type: ENUM

(1) = enable
(2) = disable

itgwEntityCfgGkDiscoveryUnicast

MIB Information: itgwEntityCfgGkDiscoveryUnicast
1.3.6.1.4.1.429.1.42.8.1.1.4
mandatory read-write

Description: This MIB object defines how GW will discover Gatekeepers. If multicast discovery is enabled the GW will send multicast message to all members of a group of GK's otherwise the GW will use the Gatekeeper addresses that are configured in the Gatekeeper Configuration table in the itgw.mib. The GW will prioritize the GK's according to their priority level which is configured for each Gatekeeper.

Settings: INTEGER

Syntax Ref. Type: ENUM

(1) = enable
(2) = disable

itgwEntityCfgSigPacketTosByte

MIB Information: itgwEntityCfgSigPacketTosByte
1.3.6.1.4.1.429.1.42.8.1.1.5
mandatory read-write

Description: IP Headers type of service byte setting for H.323 Signaling traffic

Settings: INTEGER

Syntax Ref. Type: RANGE

0 = 255

itgwEntityCfgRtpPacketTosByte

MIB Information: itgwEntityCfgRtpPacketTosByte
1.3.6.1.4.1.429.1.42.8.1.1.6
mandatory read-write

Description: IP Headers type of service byte setting for HDMtraffic

Settings: INTEGER

Syntax Ref. Type: RANGE

0 = 255

itgwEntityCfgGkPrioritySelection

MIB Information: itgwEntityCfgGkPrioritySelection
1.3.6.1.4.1.429.1.42.8.1.1.7
mandatory read-write

Description: If the GWC is in discover mode then this specifies the prioritization scheme to be used for selecting a Gatekeeper.

Settings: INTEGER

Syntax Ref. Type: ENUM

(1) = sortOnFreePort
(2) = sortOnPercentOfFreePorts
(3) = sortOnCapability
(4) = noSorting

itgwEntityCfgDiscoverGatekeeper

MIB Information: itgwEntityCfgDiscoverGatekeeper
1.3.6.1.4.1.429.1.42.8.1.1.8
mandatory read-write

Description: Attempt discovery of Gatekeepers.

Settings: INTEGER

Syntax Ref. Type: ENUM

(1) = enable
(2) = disable
0 = 65535

itgwEntityCfgMaxTimeToDiscover

MIB Information: itgwEntityCfgMaxTimeToDiscover
1.3.6.1.4.1.429.1.42.8.1.1.10
mandatory read-write

Description: If the GWC is in discover mode then this specifies the maximum time to wait for responses from GK before starting to register. The GWC will wait for either the MaxNumberToDiscover count or MaxTimeToDiscover (whichever occurs first). Cannot be set to 0.Default=10ms

Settings: INTEGER

Syntax Ref. Type: RANGE

itgwEntityCfgMaxNumberToDiscover

MIB Information: itgwEntityCfgMaxNumberToDiscover
1.3.6.1.4.1.429.1.42.8.1.1.9
mandatory read-write

Description: If the GWC is in discover mode then this specifies the maximum number of GFC's to wait for before starting to register. The GWC will wait for either the MaxNumberToDiscover count or MaxTimeToDiscover (whichever occurs first). If set to 0 the GWC will take only MaxTimeToDiscover into account.

Settings: INTEGER

Syntax Ref. Type: RANGE

1 = 65535

itgwEntityCfgLocalRasAddress

MIB Information: itgwEntityCfgLocalRasAddress
1.3.6.1.4.1.429.1.42.8.1.1.11
mandatory read-write

Description: The local domain name of the RAS interface.

Settings: DisplayString

Syntax Ref. Type: SIZE

0 = 16

itgwEntityCfgGatewayCallSignallingAddress

MIB Information: itgwEntityCfgGatewayCallSignallingAddress
1.3.6.1.4.1.429.1.42.8.1.1.12
mandatory read-write

Description: The Gateway Call Signaling interface domain name.

Settings: DisplayString

Syntax Ref. Type: SIZE

0 = 16

itgwEntityCfgGatewayCallSignallingPort

MIB Information: itgwEntityCfgGatewayCallSignallingPort
1.3.6.1.4.1.429.1.42.8.1.1.13
mandatory read-write

Description: The Gateway Call Signaling Port.Default=1720

Settings: INTEGER

Syntax Ref. Type: RANGE

1025 = 65535

itgwEntityCfgSigPacketTosMaskOctet

MIB Information: itgwEntityCfgSigPacketTosMaskOctet
1.3.6.1.4.1.429.1.42.8.1.1.14
mandatory read-write

Description: TOS Octet bit protection mask for the IP headers type of service byte setting for H.323 Signaling traffic. A zero bit value protects the original TOS octet bit value.Default=0

Settings: INTEGER

Syntax Ref. Type: RANGE

0 = 255

itgwEntityCfgRtpPacketTosMaskOctet

MIB Information: itgwEntityCfgRtpPacketTosMaskOctet
1.3.6.1.4.1.429.1.42.8.1.1.15
mandatory read-write

Description: TOS Octet bit protection mask for the IP headers type of service byte setting for HDsp traffic. A zero bit value protects the original TOS octet bit value.Default=0

Settings: INTEGER

Syntax Ref. Type: RANGE

0 = 255





Copyright © 2000 3Com Corporation.