|
|
|
|
MIB Information: iwfOprPppParam
1.3.6.1.4.1.429.1.25.35
MIB Information: iwfOprPppParamTable
1.3.6.1.4.1.429.1.25.35.1
not-accessible
Description: Table containing objects for operational PPP parameter for IWF Gateway Cards in the chassis.
MIB Information: iwfOprPppParamEntry
1.3.6.1.4.1.429.1.25.35.1.1
not-accessible
Description: There is one Operational row for each Gateway Card in the NAS chassis.
MIB Information: iwfOprPppIndex
1.3.6.1.4.1.429.1.25.35.1.1.1
mandatory read-only
Description: A unique index identifying the Gateway Card to which the PPP operational table objects pertain
Settings: INTEGER
MIB Information: iwfOprPppForceEncryptData
1.3.6.1.4.1.429.1.25.35.1.1.2
mandatory read-only
Description: This object is the operational control of sending encrypted data.
Settings: INTEGER
MIB Information: iwfOprPppForceEncryptpassword
1.3.6.1.4.1.429.1.25.35.1.1.3
mandatory read-only
Description: This object is the operationl control of PPP Authentication.
Settings: INTEGER
MIB Information: iwfOprMaxNumbConfigRequests
1.3.6.1.4.1.429.1.25.35.1.1.4
mandatory read-only
Description: This object is the operational max number of Config Requests allowed without receiving a valid configure-Ack.
Settings: INTEGER
MIB Information: iwfOprMaxNumbConfigNAK
1.3.6.1.4.1.429.1.25.35.1.1.5
mandatory read-only
Description: This object is for Max number of configure-Nak without sending a configure-Ack.
Settings: INTEGER
MIB Information: iwfOprPppMaxNumbRejects
1.3.6.1.4.1.429.1.25.35.1.1.6
mandatory read-only
Description: This object is Max number of configure-rejects before assuming PPP negotiation failed.
Settings: INTEGER
MIB Information: iwfOprPppMaxNumbTermRequests
1.3.6.1.4.1.429.1.25.35.1.1.7
mandatory read-only
Description: This object is Max number of Terminate-Request without receiving a Terminate-Ack.
Settings: INTEGER
MIB Information: iwfOprPppNegotiateTime
1.3.6.1.4.1.429.1.25.35.1.1.8
mandatory read-only
Description: This object is Max Time allowed for PPP negotiation.
Settings: INTEGER
MIB Information: iwfOprPppRestartTime
1.3.6.1.4.1.429.1.25.35.1.1.9
mandatory read-only
Description: This object is Max Time allowed for PPP Restart.
Settings: INTEGER
MIB Information: iwfOprPppIpAddressPoolMax
1.3.6.1.4.1.429.1.25.35.1.1.10
mandatory read-only
Description: This object is the operational Mask which defines the range of the Ip addresses used by PPP to dynamically allocate IP addresses.
Settings: IpAddress
MIB Information: iwfOprPppIpAddressPoolMin
1.3.6.1.4.1.429.1.25.35.1.1.11
mandatory read-only
Description: This object is the operational base address which defines the range of the Ip addresses used by PPP to dynamically allocate IP addresses.
Settings: IpAddress
Copyright © 2000 3Com Corporation.