|
|
|
|
MIB Information: iwfCfgPppParam
1.3.6.1.4.1.429.1.25.5
MIB Information: iwfCfgPppParamTable
1.3.6.1.4.1.429.1.25.5.1
not-accessible
Description: Table containing objects for configuring PPP parameter for IWF Gateway Cards in the chassis.
MIB Information: iwfCfgPppParamEntry
1.3.6.1.4.1.429.1.25.5.1.1
not-accessible
Description: There is one Configuration row for each Gateway Card in the NAS chassis.
MIB Information: iwfCfgPppIndex
1.3.6.1.4.1.429.1.25.5.1.1.1
mandatory read-only
Description: A unique index identifying the Gateway Card to which the PPP configuration table objects pertain
Settings: INTEGER
MIB Information: iwfCfgPppForceEncryptData
1.3.6.1.4.1.429.1.25.5.1.1.2
mandatory read-write
Description: This object is used to control sending of encrypted data.
Settings: INTEGER
MIB Information: iwfCfgPppForceEncryptpassword
1.3.6.1.4.1.429.1.25.5.1.1.3
mandatory read-write
Description: This object is used to control PPP Authentication.
Settings: INTEGER
MIB Information: iwfCfgPppMaxNumbConfigRequests
1.3.6.1.4.1.429.1.25.5.1.1.4
mandatory read-write
Description: This object configures the max number of Config Requests allowed without receiving a valid configure-Ack.
Settings: INTEGER
MIB Information: iwfCfgPppMaxNumbConfigNAK
1.3.6.1.4.1.429.1.25.5.1.1.5
mandatory read-write
Description: This object is for Max number of configure-Nak without sending a configure-Ack.
Settings: INTEGER
MIB Information: iwfCfgPppMaxNumbRejects
1.3.6.1.4.1.429.1.25.5.1.1.6
mandatory read-write
Description: This object is Max number of configure-rejects before assuming PPP negotiation failed.
Settings: INTEGER
MIB Information: iwfCfgPppMaxNumbTermRequests
1.3.6.1.4.1.429.1.25.5.1.1.7
mandatory read-write
Description: This object is Max number of Terminate-Request without receiving a Terminate-Ack.
Settings: INTEGER
MIB Information: iwfCfgPppNegotiateTime
1.3.6.1.4.1.429.1.25.5.1.1.8
mandatory read-write
Description: This object is Max Time allowed for PPP negotiation.
Settings: INTEGER
MIB Information: iwfCfgPppRestartTime
1.3.6.1.4.1.429.1.25.5.1.1.9
mandatory read-write
Description: This object is Max Time allowed for PPP Restart.
Settings: INTEGER
MIB Information: iwfCfgPppIpAddressPoolMax
1.3.6.1.4.1.429.1.25.5.1.1.10
mandatory read-write
Description: This object is to define the Max range of the Ip addresses used by PPP to dynamically allocate IP addresses.
Settings: IpAddress
MIB Information: iwfCfgPppIpAddressPoolMin
1.3.6.1.4.1.429.1.25.5.1.1.11
mandatory read-write
Description: This object is to define the Min range of the Ip addresses used by PPP to dynamically allocate IP addresses.
Settings: IpAddress
Copyright © 2000 3Com Corporation.