|
|
|
|
MIB Information: mcpStat
1.3.6.1.4.1.429.1.33.3
MIB Information: mcpStatCCQ933CRErrTable
1.3.6.1.4.1.429.1.33.3.1
not-accessible
Description: The table contains the CBSC initiated Accumulated number of Call Rejected cause.
MIB Information: mcpStatCCQ933CRErrEntry
1.3.6.1.4.1.429.1.33.3.1.1
not-accessible
Description: There is a row for each MCP Card in the NAS chassis.
MIB Information: mcpStatCCQ933CRErrIndex
1.3.6.1.4.1.429.1.33.3.1.1.1
mandatory read-only
Description: A unique index identifying the MCP Card to which the Q.933 table objects pertaining to the CBSC call reject.
Settings: INTEGER
MIB Information: mcpStatRecvryOnTmrExpiry
1.3.6.1.4.1.429.1.33.3.1.1.2
mandatory read-only
Description: Recovery on Timer Expiry.
Settings: INTEGER
MIB Information: mcpStatTempFailure
1.3.6.1.4.1.429.1.33.3.1.1.3
mandatory read-only
Description: CBSC is O.O.S. Release Completecause=0x41
Settings: INTEGER
MIB Information: mcpStatOptNotImplemented
1.3.6.1.4.1.429.1.33.3.1.1.4
mandatory read-only
Description: Service Options not supported. Release Completecause=0x79.
Settings: INTEGER
MIB Information: mcpStatMobileNA
1.3.6.1.4.1.429.1.33.3.1.1.5
mandatory read-only
Description: Mobile no longer accessible by this CBSC. Release Completecode=0x14.
Settings: INTEGER
MIB Information: mcpStatMSSTimerExpired
1.3.6.1.4.1.429.1.33.3.1.1.6
mandatory read-only
Description: MSS Timer Expired.
Settings: INTEGER
MIB Information: mcpStatUsrBusy
1.3.6.1.4.1.429.1.33.3.1.1.7
mandatory read-only
Description: User Busy.
Settings: INTEGER
MIB Information: mcpStatInvalidCall
1.3.6.1.4.1.429.1.33.3.1.1.8
mandatory read-only
Description: Invalid call.
Settings: INTEGER
MIB Information: mcpStatCCQ933IDErrTable
1.3.6.1.4.1.429.1.33.3.2
not-accessible
Description: The table for the accumulated number of IWU calls dropped cause.
MIB Information: mcpStatCCQ933IDErrEntry
1.3.6.1.4.1.429.1.33.3.2.1
not-accessible
Description: There is a row for each MCP Card in the NAS chassis.
MIB Information: mcpStatCCQ933IDErrIndex
1.3.6.1.4.1.429.1.33.3.2.1.1
mandatory read-only
Description: A unique index identifying the MCP Card to which the Q.933 table objects pertain.
Settings: INTEGER
MIB Information: mcpStatInvldCallRefValue
1.3.6.1.4.1.429.1.33.3.2.1.2
mandatory read-only
Description: Message other than Setup/Release Complete received with invalid CRV. Release Completecause=0x81.
Settings: INTEGER
MIB Information: mcpStatUnexptdMsgRcv
1.3.6.1.4.1.429.1.33.3.2.1.3
mandatory read-only
Description: Messages other than Release/Release Complete that are not recognized.
Settings: INTEGER
MIB Information: mcpStatInfoElemntOOS
1.3.6.1.4.1.429.1.33.3.2.1.4
mandatory read-only
Description: Information Element Out Of Sequence.
Settings: INTEGER
MIB Information: mcpStatMandtryInfoEleMissing
1.3.6.1.4.1.429.1.33.3.2.1.5
mandatory read-only
Description: Mandatory Information Element Missing.
Settings: INTEGER
MIB Information: mcpStatMandtryInfoEleContentErr
1.3.6.1.4.1.429.1.33.3.2.1.6
mandatory read-only
Description: Mandatory Information Element Content Error.
Settings: INTEGER
MIB Information: mcpStatUnrecogInfoElements
1.3.6.1.4.1.429.1.33.3.2.1.7
mandatory read-only
Description: Unrecognized Information Elements.
Settings: INTEGER
MIB Information: mcpStatCCQ933IRErrTable
1.3.6.1.4.1.429.1.33.3.3
not-accessible
Description: The table for the accumulated number of IWU calls reject cause.
MIB Information: mcpStatCCQ933IRErrEntry
1.3.6.1.4.1.429.1.33.3.3.1
not-accessible
Description: There is a row for each MCP Card in the NAS chassis.
MIB Information: mcpStatCCQ933IRErrIndex
1.3.6.1.4.1.429.1.33.3.3.1.1
mandatory read-only
Description: A unique index identifying the MCP Card to which the Q.933 table objects pertain.
Settings: INTEGER
MIB Information: mcpStatIwuTempFail
1.3.6.1.4.1.429.1.33.3.3.1.2
mandatory read-only
Description: IWU is out of service. Release Completecause=0x41.
Settings: INTEGER
MIB Information: mcpStatSwEqCong
1.3.6.1.4.1.429.1.33.3.3.1.3
mandatory read-only
Description: IWU is experiencing congestion. Release Completecause=0x42.
Settings: INTEGER
MIB Information: mcpStatResUnavail
1.3.6.1.4.1.429.1.33.3.3.1.4
mandatory read-only
Description: IWU cannot accept new data session. Release Completecause=0x47.
Settings: INTEGER
MIB Information: mcpStatChanUnacceptable
1.3.6.1.4.1.429.1.33.3.3.1.5
mandatory read-only
Description: Indicated channel or DLCI busy. Release Completecause=0x06.
Settings: INTEGER
MIB Information: mcpStatIncompDest
1.3.6.1.4.1.429.1.33.3.3.1.6
mandatory read-only
Description: Disconnect busy call. Disconnect cause=0x88.
Settings: INTEGER
MIB Information: mcpStatReqCktOrChanNotAvail
1.3.6.1.4.1.429.1.33.3.3.1.7
mandatory read-only
Description: Indicated channel or DLCI unavailable. Release Completecause=0x44.
Settings: INTEGER
MIB Information: mcpStatIdentifiedChanNA
1.3.6.1.4.1.429.1.33.3.3.1.8
mandatory read-only
Description: Channel is unequipped. Release Completecause=0x82.
Settings: INTEGER
MIB Information: mcpStatQOSUnavail
1.3.6.1.4.1.429.1.33.3.3.1.9
mandatory read-only
Description: Cannot provide requested Q.O.S. Release Completecause=0x49.
Settings: INTEGER
MIB Information: mcpStatCumCCQ933Table
1.3.6.1.4.1.429.1.33.3.4
not-accessible
Description: A table for the accumulated Call Control Q.933 Statistics.
MIB Information: mcpStatCumCCQ933Entry
1.3.6.1.4.1.429.1.33.3.4.1
not-accessible
Description: There is a row for each MCP Card in the NAS chassis.
MIB Information: mcpStatCumCCQ933Index
1.3.6.1.4.1.429.1.33.3.4.1.1
mandatory read-only
Description: A unique index identifying the MCP Card to which the Q.933 table objects pertain.
Settings: INTEGER
MIB Information: mcpStatMoFRSvcNewPDSess
1.3.6.1.4.1.429.1.33.3.4.1.2
mandatory read-only
Description: Mobile Originates a new packet data session.
Settings: INTEGER
MIB Information: mcpStatIwuFrSvcReatvPDSess
1.3.6.1.4.1.429.1.33.3.4.1.3
mandatory read-only
Description: Dormant mobile gets reactivated from the Network side.
Settings: INTEGER
MIB Information: mcpStatMoFRSvcReatvPDSess
1.3.6.1.4.1.429.1.33.3.4.1.4
mandatory read-only
Description: Dormant mobile reactivates the packet data session.
Settings: INTEGER
MIB Information: mcpStatIwuFRSvcNewPDSess
1.3.6.1.4.1.429.1.33.3.4.1.5
mandatory read-only
Description: A mobile receives a new call from the network (WAP).
Settings: INTEGER
MIB Information: mcpStatIwuClosLink
1.3.6.1.4.1.429.1.33.3.4.1.6
mandatory read-only
Description: IWU initiated FR SVC clearing Reason Code = 0x00.
Settings: INTEGER
MIB Information: mcpStatCBSCClosLkConn
1.3.6.1.4.1.429.1.33.3.4.1.7
mandatory read-only
Description: CBSC initiated FR SVC clearing Reason Code = 0x00.
Settings: INTEGER
MIB Information: mcpStatIwuDorClosLkConn
1.3.6.1.4.1.429.1.33.3.4.1.8
mandatory read-only
Description: IWU terminates a dormant call. Setup Msg Call Type=0x02.
Settings: INTEGER
MIB Information: mcpStatCBSCDorClosLkConn
1.3.6.1.4.1.429.1.33.3.4.1.9
mandatory read-only
Description: CBSC terminates a dormant call. Setup MsgCall Type=0x02.
Settings: INTEGER
MIB Information: mcpStatCBSCCallsDeactvLL
1.3.6.1.4.1.429.1.33.3.4.1.10
mandatory read-only
Description: Mobile goes dormant. IWU received a DISCONNECTReason Code=0x01.
Settings: INTEGER
MIB Information: mcpStatCurCallTable
1.3.6.1.4.1.429.1.33.3.5
not-accessible
Description: The table for the current calls statistics.
MIB Information: mcpStatCurCallEntry
1.3.6.1.4.1.429.1.33.3.5.1
not-accessible
Description: There is a row for each MCP Card in the NAS chassis.
MIB Information: mcpStatCurCallIndex
1.3.6.1.4.1.429.1.33.3.5.1.1
mandatory read-only
Description: A unique index identifying the MCP Card to which the statistics of the current call table objects pertain
Settings: INTEGER
MIB Information: mcpStatCurNumActiveCalls
1.3.6.1.4.1.429.1.33.3.5.1.2
mandatory read-only
Description: Number of calls in the Active state.
Settings: INTEGER
MIB Information: mcpStatCurNumDormantInactiveCalls
1.3.6.1.4.1.429.1.33.3.5.1.3
mandatory read-only
Description: Number of calls in the Dormant Inactive state
Settings: INTEGER
MIB Information: mcpStatCurNumDormantPagingCalls
1.3.6.1.4.1.429.1.33.3.5.1.4
mandatory read-only
Description: Number of calls in the Dormant Paging state.
Settings: INTEGER
MIB Information: mcpStatCurNumDormatPagedCalls
1.3.6.1.4.1.429.1.33.3.5.1.5
mandatory read-only
Description: Number of calls in the Dormant Paged state.
Settings: INTEGER
MIB Information: mcpStatFRQ922ErrTable
1.3.6.1.4.1.429.1.33.3.6
not-accessible
Description: The table for Frame Relay Q.922 Errors.
MIB Information: mcpStatFRQ922ErrEntry
1.3.6.1.4.1.429.1.33.3.6.1
not-accessible
Description: Entries for the accumulated number of link layer errors.
MIB Information: mcpStatFRQ922Index
1.3.6.1.4.1.429.1.33.3.6.1.1
mandatory read-only
Description: A unique index identifying the MCP Card to which the Q.922 Frame Relay objects pertain.
Settings: INTEGER
MIB Information: mcpStatFRQ922LogicalLinkLosses
1.3.6.1.4.1.429.1.33.3.6.1.2
mandatory read-only
Description: Loss of DLCI = 0 logical link.
Settings: INTEGER
MIB Information: mcpStatMCPSubSysTable
1.3.6.1.4.1.429.1.33.3.7
not-accessible
Description: The table contains the Facility sub-system status.
MIB Information: mcpStatMCPSubSysEntry
1.3.6.1.4.1.429.1.33.3.7.1
not-accessible
Description: There is a row for each MCP Card in the NAS chassis.
MIB Information: mcpStatMCPSubSysIndex
1.3.6.1.4.1.429.1.33.3.7.1.1
mandatory read-only
Description: A unique index identifying the MCP Card to which the subsystem table objects pertain
Settings: INTEGER
MIB Information: mcpStatFRSubSystem
1.3.6.1.4.1.429.1.33.3.7.1.2
mandatory read-only
Description: Status of the Frame Relay Subsystem.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = unEquipped
(2) = equipped
(3) = inServiceOperational
(4) = inServiceMarginalOper
(5) = inServiceNonOperational
(6) = outOfService
(7) = maintenanceOperational
(8) = maintenanceMarginalOper
(9) = maintenanceNonOperational
MIB Information: mcpStatFRSubSystemPrevious
1.3.6.1.4.1.429.1.33.3.7.1.3
mandatory read-only
Description: Previous status of the Frame Relay Subsystem.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = unEquipped
(2) = equipped
(3) = inServiceOperational
(4) = inServiceMarginalOper
(5) = inServiceNonOperational
(6) = outOfService
(7) = maintenanceOperational
(8) = maintenanceMarginalOper
(9) = maintenanceNonOperational
MIB Information: mcpStatCCSubSystem
1.3.6.1.4.1.429.1.33.3.7.1.4
mandatory read-only
Description: Status of the Call Control Subsystem.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = unEquipped
(2) = equipped
(3) = inServiceOperational
(4) = inServiceMarginalOper
(5) = inServiceNonOperational
(6) = outOfService
(7) = maintenanceOperational
(8) = maintenanceMarginalOper
(9) = maintenanceNonOperational
MIB Information: mcpStatCCSubSystemPrevious
1.3.6.1.4.1.429.1.33.3.7.1.5
mandatory read-only
Description: Previous status of the Call Control Subsystem.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = unEquipped
(2) = equipped
(3) = inServiceOperational
(4) = inServiceMarginalOper
(5) = inServiceNonOperational
(6) = outOfService
(7) = maintenanceOperational
(8) = maintenanceMarginalOper
(9) = maintenanceNonOperational
MIB Information: mcpStatPPPOffLoadSubSystem
1.3.6.1.4.1.429.1.33.3.7.1.6
mandatory read-only
Description: Status of the PPP data off load Control Subsystem.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = unEquipped
(2) = equipped
(3) = inServiceOperational
(4) = inServiceMarginalOper
(5) = inServiceNonOperational
(6) = outOfService
(7) = maintenanceOperational
(8) = maintenanceMarginalOper
(9) = maintenanceNonOperational
MIB Information: mcpStatPPPOffLoadSubSystemPrevious
1.3.6.1.4.1.429.1.33.3.7.1.7
mandatory read-only
Description: Previous status of the PPP data off load Control Subsystem.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = unEquipped
(2) = equipped
(3) = inServiceOperational
(4) = inServiceMarginalOper
(5) = inServiceNonOperational
(6) = outOfService
(7) = maintenanceOperational
(8) = maintenanceMarginalOper
(9) = maintenanceNonOperational
MIB Information: mcpStatPBSubSystem
1.3.6.1.4.1.429.1.33.3.7.1.8
mandatory read-only
Description: Status of the Packet Bus Subsystem.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = unEquipped
(2) = equipped
(3) = inServiceOperational
(4) = inServiceMarginalOper
(5) = inServiceNonOperational
(6) = outOfService
(7) = maintenanceOperational
(8) = maintenanceMarginalOper
(9) = maintenanceNonOperational
MIB Information: mcpStatPBSubSystemPrevious
1.3.6.1.4.1.429.1.33.3.7.1.9
mandatory read-only
Description: Previous status of the Packet Bus Subsystem.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = unEquipped
(2) = equipped
(3) = inServiceOperational
(4) = inServiceMarginalOper
(5) = inServiceNonOperational
(6) = outOfService
(7) = maintenanceOperational
(8) = maintenanceMarginalOper
(9) = maintenanceNonOperational
MIB Information: mcpStatCPUSubSystem
1.3.6.1.4.1.429.1.33.3.7.1.10
mandatory read-only
Description: Status of CPU based on utilization.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = unEquipped
(2) = equipped
(3) = inServiceOperational
(4) = inServiceMarginalOper
(5) = inServiceNonOperational
(6) = outOfService
(7) = maintenanceOperational
(8) = maintenanceMarginalOper
(9) = maintenanceNonOperational
MIB Information: mcpStatMemorySubSystem
1.3.6.1.4.1.429.1.33.3.7.1.11
mandatory read-only
Description: Status of Memory based on utilization.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = unEquipped
(2) = equipped
(3) = inServiceOperational
(4) = inServiceMarginalOper
(5) = inServiceNonOperational
(6) = outOfService
(7) = maintenanceOperational
(8) = maintenanceMarginalOper
(9) = maintenanceNonOperational
MIB Information: mcpStatAccInterfaceRestarts
1.3.6.1.4.1.429.1.33.3.7.1.12
mandatory read-only
Description: Number of Interface restarts.
Settings: INTEGER
MIB Information: mcpStatPBNetworkSideTable
1.3.6.1.4.1.429.1.33.3.8
not-accessible
Description: The table for the network side packet bus statistics.
MIB Information: mcpStatPBNetworkSideEntry
1.3.6.1.4.1.429.1.33.3.8.1
not-accessible
Description: An entry for the packet bus statistics.
MIB Information: mcpStatPBNetworkSideIndex
1.3.6.1.4.1.429.1.33.3.8.1.1
mandatory read-only
Description: An index to track the packet bus stats.
Settings: INTEGER
MIB Information: mcpStatTotPBClkLoss
1.3.6.1.4.1.429.1.33.3.8.1.2
mandatory read-only
Description: Total number of packets bus clock loss.
Settings: INTEGER
MIB Information: mcpStatTotBusTimeOuts
1.3.6.1.4.1.429.1.33.3.8.1.3
mandatory read-only
Description: Total number of packet bus time outs.
Settings: INTEGER
MIB Information: mcpStatTotNoAckTxErr
1.3.6.1.4.1.429.1.33.3.8.1.4
mandatory read-only
Description: No Ack Cycle detected communicating with the Marc card.
Settings: INTEGER
MIB Information: mcpStatTotDMAErr
1.3.6.1.4.1.429.1.33.3.8.1.5
mandatory read-only
Description: DMA Controller reports error.
Settings: INTEGER
MIB Information: mcpStatTotLogicalLnkLoss
1.3.6.1.4.1.429.1.33.3.8.1.6
mandatory read-only
Description: Total logical link loss. Loss of heartbeats with Marc card.
Settings: INTEGER
MIB Information: mcpStatTotInvalidFrRcvd
1.3.6.1.4.1.429.1.33.3.8.1.7
mandatory read-only
Description: Total invalid frames received.
Settings: INTEGER
MIB Information: mcpStatTotTxBufferOvrFlow
1.3.6.1.4.1.429.1.33.3.8.1.8
mandatory read-only
Description: Unable to transmit frame on to bus due to lack of Tx buffers.
Settings: INTEGER
MIB Information: mcpStatTotRcvBufferOvrFlow
1.3.6.1.4.1.429.1.33.3.8.1.9
mandatory read-only
Description: Unable to receive another frame from bus due to lack of Rx buffers.
Settings: INTEGER
MIB Information: mcpStatPktSessStatus
1.3.6.1.4.1.429.1.33.3.8.1.10
mandatory read-only
Description: The statistics of the total sessions in the MCP card. This would be a bulk object and the user needs to decipher the contents.
Settings: OCTET STRING
Syntax Ref. Type: SIZE
0 = 255
MIB Information: mcpStatPPPOfLoadTable
1.3.6.1.4.1.429.1.33.3.9
not-accessible
Description: The table for the PPP off load subsystem errors.
MIB Information: mcpStatPPPOfLoadEntry
1.3.6.1.4.1.429.1.33.3.9.1
not-accessible
Description: There is a row for each MCP Card in the NAS chassis.
MIB Information: mcpStatPPPOfLoadIndex
1.3.6.1.4.1.429.1.33.3.9.1.1
mandatory read-only
Description: A unique index identifying the MCP Card to which the PPP offload table objects pertain.
Settings: INTEGER
MIB Information: mcpStatPPPFramingErr
1.3.6.1.4.1.429.1.33.3.9.1.2
mandatory read-only
Description: HDLC framing errors.
Settings: INTEGER
MIB Information: mcpStatPPPFcsErr
1.3.6.1.4.1.429.1.33.3.9.1.3
mandatory read-only
Description: Checksum error found in PPP packet.
Settings: INTEGER
MIB Information: mcpStatResourceTable
1.3.6.1.4.1.429.1.33.3.10
not-accessible
Description: The table for the resource utilization.
MIB Information: mcpStatResourceEntry
1.3.6.1.4.1.429.1.33.3.10.1
not-accessible
Description: There is a row for each MCP Card in the NAS chassis.
MIB Information: mcpStatResourceIndex
1.3.6.1.4.1.429.1.33.3.10.1.1
mandatory read-only
Description: A unique index identifying the MCP Card to which the statistics of the resources table objects pertain
Settings: INTEGER
MIB Information: mcpStatCPUUtilization
1.3.6.1.4.1.429.1.33.3.10.1.2
mandatory read-only
Description: Percentage of the time non-idle tasks runs.
Settings: INTEGER
MIB Information: mcpStatMemoryUtilization
1.3.6.1.4.1.429.1.33.3.10.1.3
mandatory read-only
Description: Percentage of system memory used by all subsystems.
Settings: INTEGER
MIB Information: mcpStatDynamicCallDBTable
1.3.6.1.4.1.429.1.33.3.11
not-accessible
Description: The table for Dynamic Call Data-base.
MIB Information: mcpStatDynamicCallDBEntry
1.3.6.1.4.1.429.1.33.3.11.1
not-accessible
Description: There is a row for each session on the MCP card in the NAS chassis.
MIB Information: mcpStatDynamicCallDBIndex
1.3.6.1.4.1.429.1.33.3.11.1.1
mandatory read-only
Description: Uniquely identifies the Card.
Settings: INTEGER
MIB Information: mcpStatDynamicCallDBSessId
1.3.6.1.4.1.429.1.33.3.11.1.2
mandatory read-only
Description: Uniquely Identifies the session.
Settings: INTEGER
Syntax Ref. Type: RANGE
1 = 2000
MIB Information: mcpStatCallRefNum
1.3.6.1.4.1.429.1.33.3.11.1.3
mandatory read-only
Description: Call reference number associated with the Q.933 connection.
Settings: INTEGER
Syntax Ref. Type: RANGE
1 = 65535
MIB Information: mcpStatCallState
1.3.6.1.4.1.429.1.33.3.11.1.4
mandatory read-only
Description: The call state.
Settings: INTEGER
Syntax Ref. Type: ENUM
(12) = active
(13) = dormantInactive
(14) = dormantPaging
(15) = dormantPaged
MIB Information: mcpStatIMSI
1.3.6.1.4.1.429.1.33.3.11.1.5
mandatory read-only
Description: The IMSI. Mobile's phone number.
Settings: OCTET STRING
Syntax Ref. Type: SIZE
7 = 7
MIB Information: mcpStatESN
1.3.6.1.4.1.429.1.33.3.11.1.6
mandatory read-only
Description: The ESN. Serial number of the mobile.
Settings: INTEGER
MIB Information: mcpStatCBSCNumber
1.3.6.1.4.1.429.1.33.3.11.1.7
mandatory read-only
Description: Number of CBSC connected to this MCP card.
Settings: INTEGER
MIB Information: mcpStatFacID
1.3.6.1.4.1.429.1.33.3.11.1.8
mandatory read-only
Description: T1 span number used to service this call.
Settings: INTEGER
MIB Information: mcpStatMobileTermStatus
1.3.6.1.4.1.429.1.33.3.11.1.9
mandatory read-only
Description: Mobile Termination status.
Settings: INTEGER
MIB Information: mcpStatSlotCycleIndex
1.3.6.1.4.1.429.1.33.3.11.1.10
mandatory read-only
Description: Slot cycle index.
Settings: INTEGER
MIB Information: mcpStatPktZoneID
1.3.6.1.4.1.429.1.33.3.11.1.11
mandatory read-only
Description: Packet zone ID.
Settings: INTEGER
MIB Information: mcpStatServiceConfiguration
1.3.6.1.4.1.429.1.33.3.11.1.12
mandatory read-only
Description: Contents of Service Configuration information record. This record is included in a Status Response Message to return the current service configuration and in a Service Request Message and a Service Response Message to propose a service configuration.
Settings: OCTET STRING
Syntax Ref. Type: SIZE
12 = 12
Copyright © 2000 3Com Corporation.