|
|
|
|
MIB Information: mdmCe
1.3.6.1.4.1.429.1.6.17
MIB Information: mdmCeTable
1.3.6.1.4.1.429.1.6.17.1
not-accessible
Description: A list of configurable Cellular Support object for a modem. The number of table entries is given by modemNumber.
MIB Information: mdmCeEntry
1.3.6.1.4.1.429.1.6.17.1.1
not-accessible
Description: Objects which define the Cellular characteristics for a particular modem.
MIB Information: mdmCeIndex
1.3.6.1.4.1.429.1.6.17.1.1.1
mandatory read-only
Description: This index value which uniquely identifies the modem to which this entry is applicable. The value corresponds to the index of the corresponding modem in the entity table of the chassis MIB.
Settings: INTEGER
MIB Information: mdmCeMnp10Dis
1.3.6.1.4.1.429.1.6.17.1.1.2
mandatory read-write
Description: This object is bit 0 of S-register 60. It disable/enables MNP10 negotiation mostly used with cellular operations. Default=0.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = disable
(2) = enable
MIB Information: mdmCeMnpxDis
1.3.6.1.4.1.429.1.6.17.1.1.3
mandatory read-write
Description: This object is bit 1 of S-register 60. It will enable/disable the MNP extended services to be active during negotiation. This will mean that MNP10 will use V.42 to negotiate. Default=0.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = disable
(2) = enable
MIB Information: mdmCeComp
1.3.6.1.4.1.429.1.6.17.1.1.4
mandatory read-write
Description: This object is bit 2 of S-register 60. It selects which compression type will be negotiated if allowed by other modem settings. Default=v42bis(2).
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = mnp5
(2) = v42bis
MIB Information: mdmCeOperDis
1.3.6.1.4.1.429.1.6.17.1.1.5
mandatory read-write
Description: This object is bit 3 of S-register 60. It announces that at least one end of the link will be across a cellular network. Therefore the Dyncamic Transmit Algorithm will be active. (default=0)
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = disable
(2) = enable
MIB Information: mdmCeLinkSpeed
1.3.6.1.4.1.429.1.6.17.1.1.6
mandatory read-write
Description: This object is bit 4 of register 60 tells the modem which speed to establish the link at. (default=0)
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = linkAtHighSpeed
(2) = linkAt1200BpsV22
MIB Information: mdmCeShortFormRules
1.3.6.1.4.1.429.1.6.17.1.1.7
mandatory read-write
Description: This object is the S-register 61. It takes a value from 0 to 3 and regulates the V.42bis Short Form Negotiation rules. The short form assumes that the maximum string length is always 32 octets and that the direction of compression is always bi-directional. (default=0)
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = disable
(2) = form1CodeWords512
(3) = form2CodeWords1024
(4) = form3CodeWords2048
MIB Information: mdmCeDceBitraLim
1.3.6.1.4.1.429.1.6.17.1.1.8
mandatory read-write
Description: This object is the S-register 64. It limits DCE bitrates to values equal to or below the chosen setting. (default=0)
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = maxDceRate
(2) = bps4800
(3) = bps7200
(4) = bps9600
(5) = bps12000
(6) = bps14400
MIB Information: mdmCeDceTxLev
1.3.6.1.4.1.429.1.6.17.1.1.9
mandatory read-write
Description: This object is S-register 65. It selects DCE TX level to use during cellular operations. (default=0)
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = modemContrlTxLev
(2) = dBm10
(3) = dBm11
(4) = dBm12
(5) = dBm13
(6) = dBm14
(7) = dBm15
(8) = dBm16
(9) = dBm17
(10) = dBm18
(11) = dBm19
(12) = dBm20
(13) = dBm21
(14) = dBm22
(15) = dBm23
(16) = dBm24
(17) = dBm25
MIB Information: mdmCeV42EtcDis
1.3.6.1.4.1.429.1.6.17.1.1.10
mandatory read-write
Description: This object is the bit 0 of S-register 66. It enables/disables ETC. (default=0)
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = disable
(2) = enable
MIB Information: mdmCeV42CellSite
1.3.6.1.4.1.429.1.6.17.1.1.11
mandatory read-write
Description: This object is the bit 1 of S-register 66. It selects fixed or mobile site operations. (default=0)
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = fixedSite
(2) = mobileSite
MIB Information: mdmCeV42EtcCallToneDis
1.3.6.1.4.1.429.1.6.17.1.1.12
mandatory read-write
Description: This object is the bit 2 of S-register 66. It enables/disables ETC calling tone. (default=0)
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = disable
(2) = enable
MIB Information: mdmCeV42EtcTxLevConDis
1.3.6.1.4.1.429.1.6.17.1.1.13
mandatory read-write
Description: This object is the bit 3 of S-register 66. It enables/disables forced ETC TX level control. (default=0)
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = disable
(2) = enable
MIB Information: mdmCeDceStartRate
1.3.6.1.4.1.429.1.6.17.1.1.14
mandatory read-write
Description: This object is the bits 4 and 5 of S-register 66. It sets the DCE startup rate. (default=0)
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = auto
(2) = bps4800
(3) = bps9600
MIB Information: mdmCeV42DceTxDemDis
1.3.6.1.4.1.429.1.6.17.1.1.15
mandatory read-write
Description: This object is the bit 6 of S-register 66. It enables/disables DCE TX De-emphasis. (default=0)
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = disable
(2) = enable
MIB Information: mdmCeMnp10FallbackDis
1.3.6.1.4.1.429.1.6.17.1.1.16
mandatory read-write
Description: This object is the bit 5 of S-register 60. It enables/disables MNP10 fallback. Default=enable(2).
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = disable
(2) = enable
MIB Information: mdmCeMnp10FallforDis
1.3.6.1.4.1.429.1.6.17.1.1.17
mandatory read-write
Description: This object is the bit 6 of S-register 60. It enables/disables MNP10 fallforward. Default=enable(2).
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = disable
(2) = enable
MIB Information: mdmCeDbNoEtcDis
1.3.6.1.4.1.429.1.6.17.1.1.18
mandatory read-write
Description: This object is the bit 7 of S-register 66. It enables/disables non-ETC originate mode. (default=0/disable)
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = disable
(2) = enable
MIB Information: mdmCeMnpxDetPhEna
1.3.6.1.4.1.429.1.6.17.1.1.19
mandatory read-write
Description: This object is the bit 7 of S-register 60. It enables/disables the MNPX detection phase during connection establishment. (default=0/enable).
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enable
(2) = disable
Copyright © 2000 3Com Corporation.