|
|
|
|
MIB Information: mdmDi
1.3.6.1.4.1.429.1.6.5
MIB Information: mdmDiTable
1.3.6.1.4.1.429.1.6.5.1
not-accessible
Description: Table of DTE interface objects. The number of table entries is specified by modemNumber.
MIB Information: mdmDiEntry
1.3.6.1.4.1.429.1.6.5.1.1
not-accessible
Description: Objects that define the DTE interface for a modem.
MIB Information: mdmDiIndex
1.3.6.1.4.1.429.1.6.5.1.1.1
mandatory read-only
Description: The index for the DTE interface table contains the unique value associated with this modem as defined in the chassis mib entity table.
Settings: INTEGER
MIB Information: mdmDiEscCodeGuardTime
1.3.6.1.4.1.429.1.6.5.1.1.2
mandatory read-write
Description: Duration in 50ths of a second of idle time that must precede and follow the modem's command mode escape code. Default=50.
Settings: INTEGER
Syntax Ref. Type: RANGE
0 = 255
MIB Information: mdmDiLocalEscChar
1.3.6.1.4.1.429.1.6.5.1.1.3
mandatory read-write
Description: Decimal equivalent of the character that is used to escape to on-line command mode. Values between 128 and 255 disable the escape code. Default=43(+).
Settings: INTEGER
Syntax Ref. Type: RANGE
0 = 255
MIB Information: mdmDiCarriageRetChar
1.3.6.1.4.1.429.1.6.5.1.1.4
mandatory read-write
Description: Specifies the decimal equivalent of the carriage return character. Default=13.
Settings: INTEGER
Syntax Ref. Type: RANGE
0 = 255
MIB Information: mdmDiLineFeedChar
1.3.6.1.4.1.429.1.6.5.1.1.5
mandatory read-write
Description: Specifies the decimal equivalent of the line feed character. Default=10.
Settings: INTEGER
Syntax Ref. Type: RANGE
0 = 255
MIB Information: mdmDiBackspaceChar
1.3.6.1.4.1.429.1.6.5.1.1.6
mandatory read-write
Description: Specifies the decimal equivalent of the backspace character. Default=8.
Settings: INTEGER
Syntax Ref. Type: RANGE
0 = 255
MIB Information: mdmDiDelAsBackspace
1.3.6.1.4.1.429.1.6.5.1.1.7
mandatory read-write
Description: Defines functionality of the delete key. Acts either to delete the character the cursor is currently on or acts the same as the backspace key. Default=delete.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = delete
(2) = backspace
MIB Information: mdmDiResetOnDtrEna
1.3.6.1.4.1.429.1.6.5.1.1.8
mandatory read-write
Description: When enabled this option will cause the modem to restart when the DTR control signal drops. Default=disabled.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = disable
(2) = enable
MIB Information: mdmDiResultCodePauseDis
1.3.6.1.4.1.429.1.6.5.1.1.9
mandatory read-write
Description: When enabled the modem pauses 250ms before transmission of any result code. Default=enable.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enable
(2) = disable
MIB Information: mdmDiInterbridgeEna
1.3.6.1.4.1.429.1.6.5.1.1.10
mandatory read-write
Description: When enabled the modem operates in a mode that is compatible with an 'Appletalk InterBridge Network'. Default=disabled.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = disable
(2) = enable
MIB Information: mdmDiBreakLen
1.3.6.1.4.1.429.1.6.5.1.1.11
mandatory read-write
Description: Defines the duration of break characters that are sent to the DTE in ARQ mode. Defined in 10ms increments. Default=10(100ms).
Settings: INTEGER
Syntax Ref. Type: RANGE
0 = 255
MIB Information: mdmDiXonChar
1.3.6.1.4.1.429.1.6.5.1.1.12
mandatory read-write
Description: Defines the decimal equivalent of the Xon character. This character will be used when software flow control is enabled. Default=17.
Settings: INTEGER
Syntax Ref. Type: RANGE
0 = 255
MIB Information: mdmDiXoffChar
1.3.6.1.4.1.429.1.6.5.1.1.13
mandatory read-write
Description: Defines the decimal equivalent of the xoff character. This character will be used when software flow control is enabled. Default=19.
Settings: INTEGER
Syntax Ref. Type: RANGE
0 = 255
MIB Information: mdmDiDsrPulseTime
1.3.6.1.4.1.429.1.6.5.1.1.14
mandatory read-write
Description: Duration in 20 millisecond increments that the DSR signal is pulsed when the modem is configured for pulsed DSR mode. Default=150.
Settings: INTEGER
Syntax Ref. Type: RANGE
0 = 150
MIB Information: mdmDiRtsCtsDelay
1.3.6.1.4.1.429.1.6.5.1.1.15
mandatory read-write
Description: Duration in 10 millisecond increments that the modem delays setting CTS after detecting the presence of RTS. Default=1.
Settings: INTEGER
Syntax Ref. Type: RANGE
0 = 255
MIB Information: mdmDiHiSpeedResCodeEna
1.3.6.1.4.1.429.1.6.5.1.1.16
mandatory read-write
Description: Determines if connection establishment result codes above 9600 are sent to the DTE. Default=enable.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enable
(2) = disable
MIB Information: mdmDiCmdLocalEchoEna
1.3.6.1.4.1.429.1.6.5.1.1.17
mandatory read-write
Description: Defines whether or not the characters transmitted by the DTE are echoed back when in command mode. Default=enable(2)
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = disable
(2) = enable
MIB Information: mdmDiDataModeEchoEna
1.3.6.1.4.1.429.1.6.5.1.1.18
mandatory read-write
Description: Defines whether or not the DTE's transmitted data is echoed back durring a connection(half duplex). Default=disabled.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enable
(2) = disable
MIB Information: mdmDiDteDataRateMode
1.3.6.1.4.1.429.1.6.5.1.1.19
mandatory read-write
Description: Defines how the modem determines the DTE data rate. When set to the default follows link rate the modem switches the DTE speed to match the link rate. When set to fixed the DTE speed remains at the default DTE data rate or the rate of the last AT command. When set to ARQ fixed-Non ARQ follows the dte speed remains fixed for ARQ calls and follows the link rate for non ARQ calls.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = followsLinkRate
(2) = fixed
(3) = arqFixedNonArqFollows
MIB Information: mdmDiCdOverride
1.3.6.1.4.1.429.1.6.5.1.1.20
mandatory read-write
Description: Defines the operation of the CD(Carrier Detect) signal. When overridden the CD signal is always asserted. Default=normal.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enable
(2) = disable
MIB Information: mdmDiDtrOverride
1.3.6.1.4.1.429.1.6.5.1.1.21
mandatory read-write
Description: Defines operation with regard to DTR. When overridden the DTR signal is always assumed to be present. Default=normal.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enable
(2) = disable
MIB Information: mdmDiDsrOverride
1.3.6.1.4.1.429.1.6.5.1.1.22
mandatory read-write
Description: Determines the functionality of the modem's DSR signal. Default=Override.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = dsrOveridden
(2) = modemControled
(3) = pulsedCtsFollowsCd
(4) = pulsed
(5) = dsrEqualsCd
(6) = normalCtsFollowsCd
MIB Information: mdmDiEiaLineStatus
1.3.6.1.4.1.429.1.6.5.1.1.23
mandatory read-only
Description: Provides a mechanism for the console to determine the current state of the DTE's EIA signals.
Settings: INTEGER
Syntax Ref. Type: RANGE
0 = 255
MIB Information: mdmDiTransmitFlowCntl
1.3.6.1.4.1.429.1.6.5.1.1.24
mandatory read-write
Description: Determines if transmit flow control is enabled and if so whether it is hardware or software. Default=none.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = none
(2) = hardware
(3) = software
(4) = hardwareAndSoftware
MIB Information: mdmDiSoftwareRxFlowCntl
1.3.6.1.4.1.429.1.6.5.1.1.25
mandatory read-write
Description: Determines if receive software flow control is enabled as well as what type. Default=none.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = none
(2) = xonXoffLocalRemote
(3) = xonXoffLocal
(4) = hpHostMode
(5) = hpTerminalMode
(6) = localIncommingXonXoff
MIB Information: mdmDiHardwareRxFlowCntl
1.3.6.1.4.1.429.1.6.5.1.1.26
mandatory read-write
Description: Determines if receive hardware flow control is enabled as well as how it is implemented. Default=RTS ignored.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = rtsCtsDelayed
(2) = rtsIgnored
(3) = dataOnRtsHigh
MIB Information: mdmDiBreakHandling
1.3.6.1.4.1.429.1.6.5.1.1.27
mandatory read-write
Description: Defines the method used to handle received breaks. When defined as destructive the modem's transmit data buffer is flushed. When defined as expidited the break preceeds any pending data in the transmit buffer. Default=DestructiveExpidited.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = destructiveNotSent
(2) = destructiveExpedited
(3) = nondestructiveExpedited
(4) = nondestructiveNotSent
MIB Information: mdmDiDteNvramLock
1.3.6.1.4.1.429.1.6.5.1.1.28
mandatory read-write
Description: When locked prohibits the DTE user from changing any of the NVRAM settings in the modem. Default=unlocked.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = disable
(2) = enable
MIB Information: mdmDiSerialFormat
1.3.6.1.4.1.429.1.6.5.1.1.29
mandatory read-write
Description: Defines the data bits and parity of the modem's DTE. Used in situations where the attached DTE is unable to send AT commands to initialize the DTE format. Default=8 bit no parity.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = bit8NoParity
(2) = bit7EvenParity
(3) = bit7OddParity
(4) = bit7MarkParity
MIB Information: mdmDiDefaultDteDataRate
1.3.6.1.4.1.429.1.6.5.1.1.30
mandatory read-write
Description: Defines the data rate of the DTE. Useful in those cases where the DTE is incapable of sending an AT command to initialize the data rate and a fixed data rate is required. Default=9600.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = bps110
(2) = bps300
(3) = bps600
(4) = bps1200
(5) = bps2400
(6) = bps4800
(8) = bps9600
(12) = bps19K
(13) = bps38K
(16) = unknown
(17) = bps57K
(22) = bps115K
MIB Information: mdmDiRemAccessMsg
1.3.6.1.4.1.429.1.6.5.1.1.31
mandatory read-write
Description: Specifies if the modem is to send the 'Modem Unavailable' message to the DTE when the DTE attempts to send data to a modem that is curently in command mode with a remote DTE. Default = enabled.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enable
(2) = disable
MIB Information: mdmDiV25DteDataRate
1.3.6.1.4.1.429.1.6.5.1.1.32
optional read-write
Description: Defines the DTE Data Rates supported for V25 bis.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = bps1200
(2) = bps2400
(3) = bps4800
(4) = bps7200
(5) = bps9600
(6) = bps12K
(7) = bps14K
(8) = bps16K
(9) = bps19K
(10) = bps21K
(11) = bps24K
(12) = bps26K
(13) = bps28K
MIB Information: mdmDiSrc
1.3.6.1.4.1.429.1.6.5.1.1.33
optional read-write
Description: Specifies either NIC or Packet Bus as the source for the DTE interface.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = nic
(2) = packetBus
MIB Information: mdmDiSlot
1.3.6.1.4.1.429.1.6.5.1.1.34
optional read-write
Description: Specifies the slot address as the DTE interface source when mdmdiSrc is configured for Packet Bus.
Settings: INTEGER
Syntax Ref. Type: RANGE
1 = 16
MIB Information: mdmDiBusyClock
1.3.6.1.4.1.429.1.6.5.1.1.35
optional read-write
Description: specifies whether the modem will support either the current transmit clock or a new busy out.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = extClock1
(2) = busyOut
MIB Information: mdmDiAtString
1.3.6.1.4.1.429.1.6.5.1.1.36
mandatory read-write
Description: Provides an interface for issuing an AT command to the modem. Not implemented as a command so as to allow the object to be saved to NVRAM and subsequently configured during power-up.
Settings: DisplayString
Syntax Ref. Type: SIZE
0 = 41
MIB Information: mdmDiDtrRecognitionTime
1.3.6.1.4.1.429.1.6.5.1.1.37
mandatory read-write
Description: S25 register tells the modem how quickly to react when DTR transitions from off to on. Default is 20. Increments are in 10 ms.
Settings: INTEGER
Syntax Ref. Type: RANGE
0 = 255
Copyright © 2000 3Com Corporation.