|
|
|
|
MIB Information: mds0Cmd
1.3.6.1.4.1.429.1.37.2
MIB Information: mds0CmdTable
1.3.6.1.4.1.429.1.37.2.1
not-accessible
Description: This has all the time slot level commands applicable to the MCP card.
MIB Information: mds0CmdEntry
1.3.6.1.4.1.429.1.37.2.1.1
not-accessible
Description: There is one entry in the DS0 Command table per timeslot in the MCP card.
MIB Information: mds0CmdDs1Index
1.3.6.1.4.1.429.1.37.2.1.1.1
mandatory read-only
Description: This identifies the span.
Settings: INTEGER
MIB Information: mds0CmdIndex
1.3.6.1.4.1.429.1.37.2.1.1.2
mandatory read-only
Description: This identifies the time slot.
Settings: INTEGER
MIB Information: mds0CmdMgtStationId
1.3.6.1.4.1.429.1.37.2.1.1.3
mandatory read-write
Description: This object is a generic read-write variable that a Management Station (MS) can use to guarantee that the results from a given command are the results of a command issued by that specific MS. Each MS must SET a unique value to this object when doing commands and GET the value of this object together with mcpCmdTSReqIdand mcpCmdTSResult to detect interference from other MSs.
Settings: OCTET STRING
Syntax Ref. Type: SIZE
0 = 8
MIB Information: mds0CmdReqId
1.3.6.1.4.1.429.1.37.2.1.1.4
mandatory read-only
Description: This object contains the value of the request-id field in the SNMP PDU which invoked the current or most recent command on this DS0 entity. If the request-id is unknown or undefined this object contains the zero value.
Settings: INTEGER
MIB Information: mds0CmdFunction
1.3.6.1.4.1.429.1.37.2.1.1.5
mandatory read-write
Description: This object contains a value that identifies the command being requested.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = noCommand
(2) = equipChan
(3) = unEquipChan
MIB Information: mds0CmdForce
1.3.6.1.4.1.429.1.37.2.1.1.6
mandatory read-write
Description: In some cases the DS0 entity may be in a state such that certain commands could adversely affect connections. In such cases a command request with mcpCmdTSForce not defined or set to noForce will result in a warning. If the operator elects to ignore such warnings mcpCmdTSForce can be set to force in a re-issued request and the command will be carried out regardless of its potentially hazzardous effects.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = force
(2) = noForce
MIB Information: mds0CmdParam
1.3.6.1.4.1.429.1.37.2.1.1.7
mandatory read-write
Description: This object contains parameters that are specific to the particular command being issued. In some cases there will be no additional parameters required.
Settings: OCTET STRING
Syntax Ref. Type: SIZE
0 = 24
MIB Information: mds0CmdResult
1.3.6.1.4.1.429.1.37.2.1.1.8
mandatory read-only
Description: This object contains the result of the most recently requested command or the value none(1) if no commands have been requested since the last reset.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = none
(2) = success
(3) = inProgress
(4) = notSupported
(5) = unAbleToRun
(6) = aborted
(7) = failed
MIB Information: mds0CmdCode
1.3.6.1.4.1.429.1.37.2.1.1.9
mandatory read-only
Description: The value of this object upon command completion indicates a further description of what went wrong if the command was unsuccessful.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = noError
(2) = unable
(6) = unrecognizedCommand
(8) = slotEmpty
(12) = noResponse
(20) = unsupportedCommand
(22) = deviceDisabled
(73) = pendingSoftwareDownload
Copyright © 2000 3Com Corporation.