|
|
|
|
MIB Information: mpipCmd
1.3.6.1.4.1.429.1.38.2
MIB Information: mpipCmdTable
1.3.6.1.4.1.429.1.38.2.1
not-accessible
Description: This has all the pipe level commands applicable to the MCP card.
MIB Information: mpipCmdEntry
1.3.6.1.4.1.429.1.38.2.1.1
not-accessible
Description: There is one entry in the pipe Command table per pipe in the MCP card.
MIB Information: mpipCmdDs1Index
1.3.6.1.4.1.429.1.38.2.1.1.1
mandatory read-only
Description: The index identifies the DS1.
Settings: INTEGER
MIB Information: mpipCmdPipeIndex
1.3.6.1.4.1.429.1.38.2.1.1.2
mandatory read-only
Description: The index identifies the PIPE.
Settings: INTEGER
MIB Information: mpipCmdMgtStationId
1.3.6.1.4.1.429.1.38.2.1.1.3
mandatory read-write
Description: This object is a generic read-write variable that a Management Station (MS) can use to guarantee that the results from a given command are the results of a command issued by that specific MS. Each MS must SET a unique value to this object when doing commands and GET the value of this object together with mcpCmdPLReqId and mcpCmdPLResult to detect interference from other MSs.
Settings: OCTET STRING
Syntax Ref. Type: SIZE
0 = 8
MIB Information: mpipCmdReqId
1.3.6.1.4.1.429.1.38.2.1.1.4
mandatory read-only
Description: This object contains the value of the request-id field in the SNMP PDU which invoked the current or most recent command on this pipe entity. If the request-id is unknown or undefined this object contains the zero value.
Settings: INTEGER
MIB Information: mpipCmdFunction
1.3.6.1.4.1.429.1.38.2.1.1.5
mandatory read-write
Description: This object contains a value that identifies the command being requested.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = noCommand
(2) = equipPipe
(3) = unEquipPipe
MIB Information: mpipCmdForce
1.3.6.1.4.1.429.1.38.2.1.1.6
mandatory read-write
Description: In some cases the pipe entity may be in a state such that certain commands could adversely affect connections. In such cases a command request with mcpCmdPLForce not defined or set to noForce will result in a warning. If the operator elects to ignore such warnings mcpCmdPLForce can be set to force in a re-issued request and the command will be carried out regardless of its potentially hazzardous effects.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = force
(2) = noForce
MIB Information: mpipCmdParam
1.3.6.1.4.1.429.1.38.2.1.1.7
mandatory read-write
Description: This object contains parameters that are specific to the particular command being issued. In some cases there will be no additional parameters required.
Settings: OCTET STRING
Syntax Ref. Type: SIZE
0 = 24
MIB Information: mpipCmdResult
1.3.6.1.4.1.429.1.38.2.1.1.8
mandatory read-only
Description: This object contains the result of the most recently requested command or the value none(1) if no commands have been requested since the last reset.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = none
(2) = success
(3) = inProgress
(4) = notSupported
(5) = unAbleToRun
(6) = aborted
(7) = failed
MIB Information: mpipCmdCode
1.3.6.1.4.1.429.1.38.2.1.1.9
mandatory read-only
Description: The value of this object upon command completion indicates a further description of what went wrong if the command was unsuccessful.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = noError
(2) = unable
(6) = unrecognizedCommand
(8) = slotEmpty
(12) = noResponse
(20) = unsupportedCommand
(22) = deviceDisabled
(73) = pendingSoftwareDownload
Copyright © 2000 3Com Corporation.