|
|
|
|
MIB Information: nmcStat
1.3.6.1.4.1.429.1.2.2
MIB Information: nmcStatStatus
1.3.6.1.4.1.429.1.2.2.1
mandatory read-only
Description: This object will indicate the general status or health of the Network Management Card.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = other
(2) = ok
(3) = nonCriticalFailure
MIB Information: nmcStatDramInstalled
1.3.6.1.4.1.429.1.2.2.2
mandatory read-only
Description: This object indicates the amount of dynamic RAM currently installed on the Network Management Card. The units for this value are kilobytes.
Settings: INTEGER
MIB Information: nmcStatNVRAMInstalled
1.3.6.1.4.1.429.1.2.2.3
mandatory read-only
Description: This object indicates the amount of non-volatile RAM currently installed on the Network Management Card. The units for this value are kilobytes.
Settings: INTEGER
MIB Information: nmcStatEventId
1.3.6.1.4.1.429.1.2.2.4
mandatory read-only
Description: This value increments once for each network management event detected by the NMC. It is used to correlate SNMP traps with events that occured in the system.
Settings: INTEGER
MIB Information: nmcStatTemperature
1.3.6.1.4.1.429.1.2.2.5
optional read-only
Description: This object reflects the current temperature in the NAS chassis as detected by the NMC. The value of this object indicates the temperature in degree Celcius.
Settings: INTEGER
MIB Information: nmcStatPowerUpTstFailures
1.3.6.1.4.1.429.1.2.2.6
mandatory read-only
Description: This object contains the number of power up tests which failed during the power up of the NMC card.
Settings: Counter
MIB Information: nmcStatPowerUpTstFailBMap
1.3.6.1.4.1.429.1.2.2.7
mandatory read-only
Description: This object defines a bit map which contains a one in the postion that indicates a power up test failure. The number returned is an integer that represents which power up test(s) that have failed. (e.g. a return value of three would mean power up tests 1 & 2 failed since bits 00000011 in the least significant byte would be set.)
Settings: INTEGER
MIB Information: nmcStatTestResult
1.3.6.1.4.1.429.1.2.2.8
mandatory read-only
Description: This object contains the bit mapped result of the request to perform a self test. A non zero value indicates that there has been one or more self test failures.
Settings: INTEGER
MIB Information: nmcStatCompSwVer
1.3.6.1.4.1.429.1.2.2.9
mandatory read-only
Description: This object contains the software compatibility version.
Settings: DisplayString
Syntax Ref. Type: SIZE
0 = 9
MIB Information: nmcStatPktBusClkSrc
1.3.6.1.4.1.429.1.2.2.10
optional read-only
Description: The source of the backplane packet bus clock.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = notApplicable
(2) = backplaneActive
(3) = backplaneActive1ClkFail
(4) = nmcActive
MIB Information: nmcStatNmcPktBusClk
1.3.6.1.4.1.429.1.2.2.11
optional read-only
Description: The NMC's packet bus clock status.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = notApplicable
(2) = available
(3) = active
(4) = failed
MIB Information: nmcStatRedLed
1.3.6.1.4.1.429.1.2.2.12
optional read-only
Description: This Object will return the Reason why the Hub Status LED is RED.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = none
(2) = chassisTemperatureHigh
(3) = chassisFanFailure
(4) = voltageWarningforPSU
(5) = failureofPSU
(6) = managementBusFailure
(7) = interfaceCardFailure
(8) = incompatibleTokenRingNIC
MIB Information: nmcAuxIn1Sts
1.3.6.1.4.1.429.1.2.2.13
mandatory read-only
Description: This Object shows status of Aux Input port1.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = portOpen
(2) = portClosed
(3) = portNotApplicable
MIB Information: nmcAuxIn2Sts
1.3.6.1.4.1.429.1.2.2.14
mandatory read-only
Description: This Object shows status of Aux Input port2.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = portOpen
(2) = portClosed
(3) = portNotApplicable
MIB Information: nmcAuxOut1Sts
1.3.6.1.4.1.429.1.2.2.15
mandatory read-only
Description: This Object shows status of Aux Output port1.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = portOpen
(2) = portClosed
(3) = portNotApplicable
MIB Information: nmcAuxOut2Sts
1.3.6.1.4.1.429.1.2.2.16
mandatory read-only
Description: This Object shows status of Aux Output port2.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = portOpen
(2) = portClosed
(3) = portNotApplicable
MIB Information: nmcStatValHistIntervals
1.3.6.1.4.1.429.1.2.2.17
mandatory read-only
Description: This object gives the quantity of valid history intervals in the interval array (0..104).
Settings: INTEGER
Syntax Ref. Type: RANGE
0 = 104
Copyright © 2000 3Com Corporation.