|
|
|
|
MIB Information: nmcUiCfg
1.3.6.1.4.1.429.1.2.8
MIB Information: nmcUiCfgLanIPAddr
1.3.6.1.4.1.429.1.2.8.1
mandatory read-write
Description: This contains the IP address of the LAN interface.
Settings: IpAddress
MIB Information: nmcUiCfgLanSubnetMask
1.3.6.1.4.1.429.1.2.8.2
mandatory read-write
Description: This specifies the subnet mask for LAN interface.
Settings: IpAddress
MIB Information: nmcUiCfgWanIPAddr
1.3.6.1.4.1.429.1.2.8.3
mandatory read-write
Description: This specifies the IP address for the WAN interface.
Settings: IpAddress
MIB Information: nmcUiCfgWanSubnetMask
1.3.6.1.4.1.429.1.2.8.4
mandatory read-write
Description: This specifies the Subnet mask for the WAN interface.
Settings: IpAddress
MIB Information: nmcUiCfgDefaultGwyIP
1.3.6.1.4.1.429.1.2.8.5
mandatory read-write
Description: This specifies the address of the Gateway to which the IP will forward those packets whose net ID does not match the net ID of either interface.
Settings: IpAddress
MIB Information: nmcUiCfgLocalTrIeeeAddr
1.3.6.1.4.1.429.1.2.8.6
mandatory read-write
Description: This gives the IEEE physical address of the Token Ring interface.
Settings: OCTET STRING
Syntax Ref. Type: SIZE
6 = 6
MIB Information: nmcUiCfgPrivateString
1.3.6.1.4.1.429.1.2.8.7
mandatory write-only
Description: This specifies the SNMP read-write community string.Default='private'.
Settings: DisplayString
Syntax Ref. Type: SIZE
0 = 32
MIB Information: nmcUiCfgLanIfEnable
1.3.6.1.4.1.429.1.2.8.8
optional read-write
Description: This parameter controls the enable/disable of the LAN interface.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enable
(2) = disable
MIB Information: nmcUiCfgPublicString
1.3.6.1.4.1.429.1.2.8.9
mandatory write-only
Description: This specifies the SNMP read-only community string.Default='public'.
Settings: DisplayString
Syntax Ref. Type: SIZE
0 = 32
MIB Information: nmcUiCfgRouteEnable
1.3.6.1.4.1.429.1.2.8.10
optional read-write
Description: This Parameter controls the ability of the NMC to route traffic between it's LAN and SLIP interfaces Default = enable(1).
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enable
(2) = disable
MIB Information: nmcUiCfgUiSlipCfg
1.3.6.1.4.1.429.1.2.8.11
optional read-write
Description: This is used to configure the UI port as SLIP or UI. Default=UI.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = uiport
(2) = slipport
MIB Information: nmcUiCfgWan2IpAddr
1.3.6.1.4.1.429.1.2.8.12
mandatory read-write
Description: This contains the IP address of second SLIP port.
Settings: IpAddress
MIB Information: nmcUiCfgWan2SubnetMask
1.3.6.1.4.1.429.1.2.8.13
mandatory read-write
Description: This contains SubnetMask for Second Slip port.
Settings: IpAddress
MIB Information: nmcUiCfgInactiveTime
1.3.6.1.4.1.429.1.2.8.14
optional read-write
Description: This parameter is in minutes it is used as an Inactivity time on the UI port. The Default is 3 minutes and 0 minutes disables the feature.
Settings: INTEGER
Syntax Ref. Type: RANGE
0 = 1440
MIB Information: nmcUiCfgPassword
1.3.6.1.4.1.429.1.2.8.15
optional read-write
Description: This parameter is used to Enable or Disable the PASSWORD protection for UI functions. Default = disabled.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enable
(2) = disable
MIB Information: nmcUiCfgOverrideDipSw
1.3.6.1.4.1.429.1.2.8.16
optional read-write
Description: This parameter is used to override hardware dip switches and used software dip switches instead.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = override
(2) = notoverride
MIB Information: nmcUiCfgUiPortSpeed
1.3.6.1.4.1.429.1.2.8.17
optional read-write
Description: This parameter defines UI serial port speed.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = bps9600
(2) = bps19200
(3) = bps38400
(4) = bps115200
MIB Information: nmcUiCfgWanPortSpeed
1.3.6.1.4.1.429.1.2.8.18
optional read-write
Description: This parameter defines WAN(SLIP) serial port speed.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = bps9600
(2) = bps19200
(3) = bps38400
(4) = bps115200
Copyright © 2000 3Com Corporation.