|
|
|
|
MIB Information: pbTrapEna
1.3.6.1.4.1.429.1.12.3
MIB Information: pbTrapEnaTable
1.3.6.1.4.1.429.1.12.3.1
not-accessible
Description: A table containing an enable for each trap that a manageable Gateway entity is capable of generating.
MIB Information: pbTrapEnaEntry
1.3.6.1.4.1.429.1.12.3.1.1
not-accessible
Description: There is one Gateway trap enable row for each Gateway card in the NAS chassis.
MIB Information: pbTrapEnaIndex
1.3.6.1.4.1.429.1.12.3.1.1.1
mandatory read-only
Description: A unique value for each Gateway Card in the chassis. The value of this object matches the value of the index of the corresponding Gateway Card's entry in the entity table of the chassis MIB.
Settings: INTEGER
MIB Information: pbTrapSessionIndex
1.3.6.1.4.1.429.1.12.3.1.1.2
mandatory read-only
Description: A value that identifies the packet bus session for trap enable/disable.
Settings: INTEGER
MIB Information: pbTrapEnaSessActive
1.3.6.1.4.1.429.1.12.3.1.1.3
mandatory read-write
Description: An object which enables or disables the Active Session trap.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enableTrap
(2) = disableAll
(3) = enableLog
(4) = enableAll
MIB Information: pbTrapEnaPktBusCongest
1.3.6.1.4.1.429.1.12.3.1.1.4
mandatory read-write
Description: An object to enable or disable the Packet Bus Congestion trap. The Packet Bus Congestion trap is generated when a valid packet bus session is in progress but either the Modem or the Gateway packet bus driver is experiencing congestion problem.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enableTrap
(2) = disableAll
(3) = enableLog
(4) = enableAll
MIB Information: pbTrapEnaPktBusSessLost
1.3.6.1.4.1.429.1.12.3.1.1.5
mandatory read-write
Description: An object to enable or disable the trap that is generated when a valid Packet Bus session has been lost.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enableTrap
(2) = disableAll
(3) = enableLog
(4) = enableAll
MIB Information: pbTrapEnaSessionInactive
1.3.6.1.4.1.429.1.12.3.1.1.6
mandatory read-write
Description: An object to enable or disable a trap which is generated when a request is made to change a packet bus session from the active to inactive state.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enableTrap
(2) = disableAll
(3) = enableLog
(4) = enableAll
MIB Information: pbTrapEnaSessionError
1.3.6.1.4.1.429.1.12.3.1.1.7
mandatory read-write
Description: An object which enables or disables the packet bus session error trap.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enableTrap
(2) = disableAll
(3) = enableLog
(4) = enableAll
Copyright © 2000 3Com Corporation.