|
|
|
|
MIB Information: system
1.3.6.1.2.1.1
MIB Information: sysDescr
1.3.6.1.2.1.1.1
mandatory read-only
Description: A textual description of the entity. This value should include the full name and version identification of the system's hardware type software operating-system and networking software. It is mandatory that this only contain printable ASCII characters.
Settings: DisplayString
Syntax Ref. Type: SIZE
0 = 255
MIB Information: sysObjectID
1.3.6.1.2.1.1.2
mandatory read-only
Description: The vendor's authoritative identification of the network management subsystem contained in the entity. This value is allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides an easy and unambiguous means for determining \Qwhat kind of box' is being managed. For example if vendor \QFlintstones Inc.' was assigned the subtree 1.3.6.1.4.1.4242 it could assign the identifier 1.3.6.1.4.1.4242.1.1 to its \QFred Router'.
Settings: OBJECT IDENTIFIER
MIB Information: sysUpTime
1.3.6.1.2.1.1.3
mandatory read-only
Description: The time (in hundredths of a second) since the network management portion of the system was last re-initialized.
Settings: TimeTicks
MIB Information: sysContact
1.3.6.1.2.1.1.4
mandatory read-write
Description: The textual identification of the contact person for this managed node together with information on how to contact this person.
Settings: DisplayString
Syntax Ref. Type: SIZE
0 = 255
MIB Information: sysName
1.3.6.1.2.1.1.5
mandatory read-write
Description: An administratively-assigned name for this managed node. By convention this is the node's fully-qualified domain name.
Settings: DisplayString
Syntax Ref. Type: SIZE
0 = 255
MIB Information: sysLocation
1.3.6.1.2.1.1.6
mandatory read-write
Description: The physical location of this node (e.g. \Qtelephone closet 3rd floor').
Settings: DisplayString
Syntax Ref. Type: SIZE
0 = 255
MIB Information: sysServices
1.3.6.1.2.1.1.7
mandatory read-only
Description: A value which indicates the set of services that this entity primarily offers. The value is a sum. This sum initially takes the value zero Then for each layer L in the range 1 through 7 that this node performs transactions for 2 raised to (L - 1) is added to the sum. For example a node which performs primarily routing functions would have a value of 4 (2^(3-1)). In contrast a node which is a host offering application services would have a value of 72 (2^(4-1) + 2^(7-1)). Note that in the context of the Internet suite of protocols values should be calculated accordingly: layer functionality 1 physical (e.g. repeaters) 2 datalink/subnetwork (e.g. bridges) 3 internet (e.g. IP gateways) 4 end-to-end (e.g. IP hosts) 7 applications (e.g. mail relays) For systems including OSI protocols layers 5 and 6 may also be counted.
Settings: INTEGER
Syntax Ref. Type: RANGE
0 = 127
Copyright © 2000 3Com Corporation.