|
|
|
|
MIB Information: ss7iCfg
1.3.6.1.4.1.429.1.35.1
MIB Information: ss7iCfgTable
1.3.6.1.4.1.429.1.35.1.1
not-accessible
Description: The Configuration Table contains an entry for each of the manageable HiPer SS7i cards in the chassis. It contains objects that reflect the current configuration of parameters that affect the operation of all the entities that reside on the given card.
MIB Information: ss7iCfgEntry
1.3.6.1.4.1.429.1.35.1.1.1
not-accessible
Description: There is one Configuration Table entry per HiPer SS7i Card in the chassis.
MIB Information: ss7iCfgIndex
1.3.6.1.4.1.429.1.35.1.1.1.1
mandatory read-only
Description: A unique value for each HiPer SS7i card in the chassis. The value of ss7iCfgIndex matches the value of the index for the corresponding HiPer SS7i card entity in the entity table of the chassis MIB.
Settings: INTEGER
MIB Information: ss7iCfgIpAddr
1.3.6.1.4.1.429.1.35.1.1.1.2
mandatory read-write
Description: The IP address on interface 0 of the HiPer SS7i.
Settings: IpAddress
MIB Information: ss7iCfgNetmask
1.3.6.1.4.1.429.1.35.1.1.1.3
mandatory read-write
Description: The netmask on interface 0 of the HiPer SS7i.
Settings: IpAddress
MIB Information: ss7iCfgDfltGwIpAddr
1.3.6.1.4.1.429.1.35.1.1.1.4
mandatory read-write
Description: The IP address of the default IP routing gateway.
Settings: IpAddress
MIB Information: ss7iCfgProtocol
1.3.6.1.4.1.429.1.35.1.1.1.5
mandatory read-write
Description: The external signaling protocol running over the TCP/IP connection with the external signaling gateway. Default = hss7iSlapV2(1).
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = slapV2
MIB Information: ss7iCfgGwConnStartMethod
1.3.6.1.4.1.429.1.35.1.1.1.6
mandatory read-write
Description: The method used by the HiPer SS7i to bring up the TCP/IP connection to the external signaling gateway at boot time.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = lsAuto
(2) = lsManual
MIB Information: ss7iCfgGwIpAddr
1.3.6.1.4.1.429.1.35.1.1.1.7
mandatory read-write
Description: The primary external SS7 gateway IP address. Valid for SLAP only.
Settings: IpAddress
MIB Information: ss7iCfgGwPort
1.3.6.1.4.1.429.1.35.1.1.1.8
mandatory read-write
Description: The primary external SS7 gateway port number. Valid for SLAP only.
Settings: INTEGER
MIB Information: ss7iCfgSecGwIpAddr
1.3.6.1.4.1.429.1.35.1.1.1.9
mandatory read-write
Description: The secondary external SS7 gateway IP address. Valid for SLAP only.
Settings: IpAddress
MIB Information: ss7iCfgSecGwPort
1.3.6.1.4.1.429.1.35.1.1.1.10
mandatory read-write
Description: The secondary external SS7 gateway port number. Valid for SLAP only.
Settings: INTEGER
MIB Information: ss7iCfgHrtbtTimerNearEnd
1.3.6.1.4.1.429.1.35.1.1.1.11
mandatory read-write
Description: The HiPer SS7i heartbeat timer. Upon expiration the HiPer SS7i will send a heartbeat message to the external SS7 gateway. The time should be less than what the gateway expects. Valid for SLAP only. Default = 15000 msec.
Settings: INTEGER
Syntax Ref. Type: RANGE
1 = 86400000
MIB Information: ss7iCfgHrtbtTimerFarEnd
1.3.6.1.4.1.429.1.35.1.1.1.12
mandatory read-write
Description: The external SS7 gateway heartbeat timer. Upon expiration it causes the HiPer SS7i to commence the connection re-establishment procedure to the external SS7 gateway. The time should be longer than what the external SS7 gateway is set to. Valid for SLAP only. Default = 15000 msec.
Settings: INTEGER
Syntax Ref. Type: RANGE
1 = 86400000
MIB Information: ss7iCfgChassisId
1.3.6.1.4.1.429.1.35.1.1.1.13
mandatory read-write
Description: This uniquely identifies logical Chassis under the control of the HiPer SS7I valid for SLAP only. The OCTET STRING format must be FF FF FF FF .
Settings: OCTET STRING
Syntax Ref. Type: SIZE
0 = 4
MIB Information: ss7iCfgGwConnRetryCnt
1.3.6.1.4.1.429.1.35.1.1.1.14
mandatory read-write
Description: The number of times the HiPer SS7i will attempt to re-establish the TCP/IP connection to the external SS7 gateway after the initial failure was detected. Valid for SLAP only. Default = 3.
Settings: INTEGER
MIB Information: ss7iCfgGwConnRetryIntvl
1.3.6.1.4.1.429.1.35.1.1.1.15
mandatory read-write
Description: The time interval between attempts of the HiPer SS7i to re-establish the TCP/IP connection to the external SS7 gateway. Valid for SLAP only. Default = 2 sec.
Settings: INTEGER
MIB Information: ss7iCfgGwMssdHrtbtThrsh
1.3.6.1.4.1.429.1.35.1.1.1.16
mandatory read-write
Description: The number of external SS7 gateway heartbeat timeouts allowed before the connection to the gateway is considered lost. A setting of 0 means no attempt will be made to re-establish the connection. Default = 1.
Settings: INTEGER
Copyright © 2000 3Com Corporation.