|
|
|
|
MIB Information: ss7iTrap
1.3.6.1.4.1.429.1.35.3
MIB Information: ss7iTrapTable
1.3.6.1.4.1.429.1.35.3.1
not-accessible
Description: Table containing objects to enable traps on the HiPer SS7i cards in the chassis.
MIB Information: ss7iTrapEntry
1.3.6.1.4.1.429.1.35.3.1.1
not-accessible
Description: There is one entry for each HiPer SS7i card in the chassis.
MIB Information: ss7iTrapIndex
1.3.6.1.4.1.429.1.35.3.1.1.1
mandatory read-only
Description: A unique index identifying the HiPer SS7i card to which the trap enable objects pertain.
Settings: INTEGER
MIB Information: ss7iTrapPbusLinkUp
1.3.6.1.4.1.429.1.35.3.1.1.2
mandatory read-write
Description: Enables reporting of a trap and/or log message when the ENFAS packet bus signaling link to the HiPer Dsp comes up. Default = disableAll(2).
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enableTrap
(2) = disableAll
(3) = enableLog
(4) = enableAll
MIB Information: ss7iTrapPbusLinkDown
1.3.6.1.4.1.429.1.35.3.1.1.3
mandatory read-write
Description: Enables reporting of a trap and/or log message when the ENFAS packet bus signaling link to the HiPer Dsp goes down. Default = disableAll(2).
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enableTrap
(2) = disableAll
(3) = enableLog
(4) = enableAll
MIB Information: ss7iTrapGwConnUp
1.3.6.1.4.1.429.1.35.3.1.1.4
mandatory read-write
Description: Enables reporting of a trap and/or log message when the TCP/IP signaling connection to the SS7 (or media) gateway comes up. Default = disableAll(2).
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enableTrap
(2) = disableAll
(3) = enableLog
(4) = enableAll
MIB Information: ss7iTrapGwConnDown
1.3.6.1.4.1.429.1.35.3.1.1.5
mandatory read-write
Description: Enables reporting of a trap and/or log message when the TCP/IP signaling connection to the SS7 (or media) gateway goes down. Default = disableAll(2).
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enableTrap
(2) = disableAll
(3) = enableLog
(4) = enableAll
Copyright © 2000 3Com Corporation.