|
|
|
|
MIB Information: traxId
1.3.6.1.4.1.429.1.31.1
MIB Information: traxIdTable
1.3.6.1.4.1.429.1.31.1.1
not-accessible
Description: A table that contains information that identifies the hardware and software that make up the specified Hiper TRAX card.
MIB Information: traxIdEntry
1.3.6.1.4.1.429.1.31.1.1.1
not-accessible
Description: There is one entry in this table for every Hiper TRAX card in the chassis.
MIB Information: traxIdIndex
1.3.6.1.4.1.429.1.31.1.1.1.1
mandatory read-only
Description: An index that uniquely identifies the Hiper TRAX card for which this row in the table pertains. The value of this index matches the value of the index for the corresponding entity in the entity table of the chassis MIB.
Settings: INTEGER
MIB Information: traxIdHardwareSerNum
1.3.6.1.4.1.429.1.31.1.1.1.2
mandatory read-only
Description: The Hiper TRAX card's hardware serial number as stored in EEPROM.
Settings: DisplayString
MIB Information: traxIdHardwareRev
1.3.6.1.4.1.429.1.31.1.1.1.3
mandatory read-only
Description: The hardware revision of the specified Hiper TRAX card as stored in its EEPROM.
Settings: DisplayString
MIB Information: traxIdSoftwareRev
1.3.6.1.4.1.429.1.31.1.1.1.4
mandatory read-only
Description: The revision of the software being executed in the specified Hiper TRAX card.
Settings: DisplayString
MIB Information: traxIdCpuType
1.3.6.1.4.1.429.1.31.1.1.1.5
mandatory read-only
Description: Defines the type of CPU present on the Hiper TRAX NAC.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = i80386
(2) = i80486
(3) = powerPC603
MIB Information: traxIdRamInstalled
1.3.6.1.4.1.429.1.31.1.1.1.6
mandatory read-only
Description: Specifies the amount of DRAM installed on the Hiper TRAX Gateway NAC in Kbytes.
Settings: INTEGER
MIB Information: traxIdFlashInstalled
1.3.6.1.4.1.429.1.31.1.1.1.7
mandatory read-only
Description: Specifies the amount of Flash Rom installed on the Hiper TRAX NAC in Kbytes.
Settings: INTEGER
MIB Information: traxIdSelfTestResult
1.3.6.1.4.1.429.1.31.1.1.1.9
mandatory read-only
Description: Displays the results of the most resent self test performed by the Hiper TRAX NAC. If all tests have passed a value of 0 is returned.
Settings: INTEGER
MIB Information: traxIdMgmtConnect
1.3.6.1.4.1.429.1.31.1.1.1.10
mandatory read-only
Description: Indicates the current status of Hiper TRAX Card user interface.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = inactive
(2) = active
Copyright © 2000 3Com Corporation.