|
|
|
|
MIB Information: ulpb
1.3.6.1.4.1.429.1.9
MIB Information: ulpbAdmnTable
1.3.6.1.4.1.429.1.9.1
not-accessible
Description: This table defines the objects that can be changed to manage a LAPB interface. Changing one of these parameters may take effect in the operating LAPB immediately or may wait until the interface is restarted depending on the details of the implementation.
MIB Information: ulpbAdmnEntry
1.3.6.1.4.1.429.1.9.1.1
not-accessible
Description: Configure parameter values for a specific LAPB.
MIB Information: ulpbAdmnIndex
1.3.6.1.4.1.429.1.9.1.1.1
mandatory read-only
Description: A unique value for each X.25 subnetwork entity running LAPB in the chassis. The value of this object matches the value of the index of the corresponding X.25 subnetwork entity running LAPB entry in the entity table of the chassis MIB.
Settings: INTEGER
MIB Information: ulpbAdmnN2ReXmitVal
1.3.6.1.4.1.429.1.9.1.1.2
mandatory read-write
Description: The maximum number of times a PDU is sent after the Ack P-bit or Reject timer expires. It also limits RR w/P-bit sends with remote busy true and the Busy timer expiring.Default=10.
Settings: INTEGER
Syntax Ref. Type: RANGE
1 = 255
MIB Information: ulpbAdmnT1AckTime
1.3.6.1.4.1.429.1.9.1.1.3
mandatory read-write
Description: The time interval during which the LAPB expects to receive a response to an outstanding IPDU or unexpected response to a sent unnumbered PDU. Value is in 0.1 second units.Default=10.
Settings: INTEGER
Syntax Ref. Type: RANGE
1 = 3000
MIB Information: ulpbAdmnTpfVal
1.3.6.1.4.1.429.1.9.1.1.4
mandatory read-write
Description: The time interval during which the LAPB expects to receive a PDU with the F-bit set to 1 in response to a command with the P-bit set to 1. Value is in 0.1 second units.Default=7.
Settings: INTEGER
Syntax Ref. Type: RANGE
1 = 3000
MIB Information: ulpbAdmnTrejVal
1.3.6.1.4.1.429.1.9.1.1.5
mandatory read-write
Description: The time interval during which the LAPB expects to receive a reply to a sent REJ TPDU. Value is in 0.1 second units.Default=25.
Settings: INTEGER
Syntax Ref. Type: RANGE
1 = 10000
MIB Information: ulpbAdmnTbusyVal
1.3.6.1.4.1.429.1.9.1.1.6
mandatory read-write
Description: The time interval during which the LAPB waits for an indication of the clearance of a busy condition at the other LAPB. Value is in 0.1 second units.Default=100.
Settings: INTEGER
Syntax Ref. Type: RANGE
1 = 30000
MIB Information: ulpbAdmnLinkIdleTime
1.3.6.1.4.1.429.1.9.1.1.7
mandatory read-write
Description: The time interval during which the LAPB expexts to receive a PDU from the other LAPB. At expiration the P/F cycle which may result in disconnection is initiated. Value is in 0.1 second units. A value of 0 disables the timer.Default=250.
Settings: INTEGER
Syntax Ref. Type: RANGE
0 = 32000
MIB Information: ulpbAdmnT2AckDelayTime
1.3.6.1.4.1.429.1.9.1.1.8
mandatory read-write
Description: The maximum time delay before sending a delayed RR. This must be considerably less than the Ack time value. Value is in 0.1 second units.Default=4.
Settings: INTEGER
Syntax Ref. Type: RANGE
0 = 3000
MIB Information: ulpbAdmnRecKWindowSz
1.3.6.1.4.1.429.1.9.1.1.9
mandatory read-write
Description: The maximum number of unacknowledged IPDUs that can be received before the acknowledgement RR must be sent.Default=3.
Settings: INTEGER
Syntax Ref. Type: RANGE
0 = 127
MIB Information: ulpbAdmnXmitKWindowSz
1.3.6.1.4.1.429.1.9.1.1.10
mandatory read-write
Description: The maximum number of unacknowledged PDUs that may be sent before a response is required.Normal Mode = 1-7.Extended Mode = 1-127.Default=7.
Settings: INTEGER
Syntax Ref. Type: RANGE
1 = 127
MIB Information: ulpbAdmnLocProbe
1.3.6.1.4.1.429.1.9.1.1.11
mandatory read-write
Description: The position before the window is closed at which an I PDU is sent with the P-bit set to solicit an acknowledgment from the receiver.Default=0.
Settings: INTEGER
Syntax Ref. Type: RANGE
0 = 127
MIB Information: ulpbAdmnMaxRecFrmSz
1.3.6.1.4.1.429.1.9.1.1.12
mandatory read-write
Description: The maximum allowable received I frame size. It consists of X25 data + x25 protocol + LAPB protocol.Default=300.
Settings: INTEGER
Syntax Ref. Type: RANGE
133 = 519
MIB Information: ulpbAdmnIgnUaError
1.3.6.1.4.1.429.1.9.1.1.13
mandatory read-write
Description: When the connection is in ERROR state this parameter defines whether or not to ignore any UA frames received.Default=disable(1).
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = disable
(2) = enable
MIB Information: ulpbAdmnFrmrFrmrError
1.3.6.1.4.1.429.1.9.1.1.14
mandatory read-write
Description: When the connection is in ERROR state this parameter defines whether or not to re-transmit a frame reject if one is received.Default=disable(1).
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = disable
(2) = enable
MIB Information: ulpbAdmnFrmrInvrspError
1.3.6.1.4.1.429.1.9.1.1.15
mandatory read-write
Description: When the connection is in ERROR state this parameter defines whether or not to transmit a frame reject if an invalid frame response is received.Default=disable(1).
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = disable
(2) = enable
MIB Information: ulpbAdmnSframePbit
1.3.6.1.4.1.429.1.9.1.1.16
mandatory read-write
Description: This parameter defines whether or not to send a frame reject if an S-Frame is received without the P-bit set.Default=disable(1).
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = disable
(2) = enable
MIB Information: ulpbAdmnDmOnAdm
1.3.6.1.4.1.429.1.9.1.1.17
mandatory read-write
Description: This parameter defines whether or not to send a DM on entry to ADM state.Default=enable(2).
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = disable
(2) = enable
MIB Information: ulpbOperTable
1.3.6.1.4.1.429.1.9.2
not-accessible
Description: This table contains configuration information about interface parameters currently set in the interface. These objects are read-only.
MIB Information: ulpbOperEntry
1.3.6.1.4.1.429.1.9.2.1
not-accessible
Description: Entries of ulpbOperTable.
MIB Information: ulpbOperIndex
1.3.6.1.4.1.429.1.9.2.1.1
mandatory read-only
Settings: INTEGER
MIB Information: ulpbOperN2ReXmitVal
1.3.6.1.4.1.429.1.9.2.1.2
mandatory read-only
Settings: INTEGER
Syntax Ref. Type: RANGE
1 = 255
MIB Information: ulpbOperT1AckTime
1.3.6.1.4.1.429.1.9.2.1.3
mandatory read-only
Settings: INTEGER
Syntax Ref. Type: RANGE
1 = 3000
MIB Information: ulpbOperTpfVal
1.3.6.1.4.1.429.1.9.2.1.4
mandatory read-only
Settings: INTEGER
Syntax Ref. Type: RANGE
1 = 3000
MIB Information: ulpbOperTrejVal
1.3.6.1.4.1.429.1.9.2.1.5
mandatory read-only
Settings: INTEGER
Syntax Ref. Type: RANGE
1 = 10000
MIB Information: ulpbOperTbusyVal
1.3.6.1.4.1.429.1.9.2.1.6
mandatory read-only
Settings: INTEGER
Syntax Ref. Type: RANGE
1 = 30000
MIB Information: ulpbOperLinkIdleTime
1.3.6.1.4.1.429.1.9.2.1.7
mandatory read-only
Settings: INTEGER
Syntax Ref. Type: RANGE
0 = 32000
MIB Information: ulpbOperT2AckDelayTime
1.3.6.1.4.1.429.1.9.2.1.8
mandatory read-only
Settings: INTEGER
Syntax Ref. Type: RANGE
0 = 3000
MIB Information: ulpbOperRecKWindowSz
1.3.6.1.4.1.429.1.9.2.1.9
mandatory read-only
Settings: INTEGER
Syntax Ref. Type: RANGE
0 = 127
MIB Information: ulpbOperXmitKWindowSz
1.3.6.1.4.1.429.1.9.2.1.10
mandatory read-only
Settings: INTEGER
Syntax Ref. Type: RANGE
1 = 127
MIB Information: ulpbOperLocProbe
1.3.6.1.4.1.429.1.9.2.1.11
mandatory read-only
Settings: INTEGER
Syntax Ref. Type: RANGE
0 = 127
MIB Information: ulpbOperMaxRecFrmSz
1.3.6.1.4.1.429.1.9.2.1.12
mandatory read-only
Settings: INTEGER
Syntax Ref. Type: RANGE
133 = 519
MIB Information: ulpbOperIgnUaError
1.3.6.1.4.1.429.1.9.2.1.13
mandatory read-only
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = disable
(2) = enable
MIB Information: ulpbOperFrmrFrmrError
1.3.6.1.4.1.429.1.9.2.1.14
mandatory read-only
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = disable
(2) = enable
MIB Information: ulpbOperFrmrInvrspError
1.3.6.1.4.1.429.1.9.2.1.15
mandatory read-only
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = disable
(2) = enable
MIB Information: ulpbOperSframePbit
1.3.6.1.4.1.429.1.9.2.1.16
mandatory read-only
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = disable
(2) = enable
MIB Information: ulpbOperDmOnAdm
1.3.6.1.4.1.429.1.9.2.1.17
mandatory read-only
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = disable
(2) = enable
MIB Information: ulpbStatTable
1.3.6.1.4.1.429.1.9.3
not-accessible
Description: Statistics information about this LAPB interface.
MIB Information: ulpbStatEntry
1.3.6.1.4.1.429.1.9.3.1
not-accessible
Description: Entries of ulpbStatTrable.
MIB Information: ulpbStatIndex
1.3.6.1.4.1.429.1.9.3.1.1
mandatory read-only
Description: A unique value for each X.25 subnetwork entity running LAPB in the chassis. The value of this object matches the value of the index of the corresponding X.25 subnetwork entity running LAPB entry in the entity table of the chassis MIB.
Settings: INTEGER
MIB Information: ulpbStatRRCmdsRcvd
1.3.6.1.4.1.429.1.9.3.1.2
mandatory read-only
Description: Number of RR commands received.
Settings: INTEGER
MIB Information: ulpbStatRRCmdsTrnsmt
1.3.6.1.4.1.429.1.9.3.1.3
mandatory read-only
Description: Number of RR commands transmitted.
Settings: INTEGER
MIB Information: ulpbStatRRRspsRcvd
1.3.6.1.4.1.429.1.9.3.1.4
mandatory read-only
Description: Number of RR response received.
Settings: INTEGER
MIB Information: ulpbStatRRRspsTrnsmt
1.3.6.1.4.1.429.1.9.3.1.5
mandatory read-only
Description: Number or RR response transmitted.
Settings: INTEGER
MIB Information: ulpbStatRNRCmdsRcvd
1.3.6.1.4.1.429.1.9.3.1.6
mandatory read-only
Description: Number of RNR commands received.
Settings: INTEGER
MIB Information: ulpbStatRNRCmdsTrnsmt
1.3.6.1.4.1.429.1.9.3.1.7
mandatory read-only
Description: Number of RNR commands transmitted.
Settings: INTEGER
MIB Information: ulpbStatRNRRspsRcvd
1.3.6.1.4.1.429.1.9.3.1.8
mandatory read-only
Description: Number of RNR response received.
Settings: INTEGER
MIB Information: ulpbStatRNRRspsTrnsmt
1.3.6.1.4.1.429.1.9.3.1.9
mandatory read-only
Description: Number of RNR response transmitted.
Settings: INTEGER
MIB Information: ulpbStatREJCmdsRcvd
1.3.6.1.4.1.429.1.9.3.1.10
mandatory read-only
Description: Number of REJ commands received.
Settings: INTEGER
MIB Information: ulpbStatREJCmdsTrnsmt
1.3.6.1.4.1.429.1.9.3.1.11
mandatory read-only
Description: Number of REJ commands transmitted.
Settings: INTEGER
MIB Information: ulpbStatREJRspsRcvd
1.3.6.1.4.1.429.1.9.3.1.12
mandatory read-only
Description: Number of REJ responses received.
Settings: INTEGER
MIB Information: ulpbStatREJRspsTrnsmt
1.3.6.1.4.1.429.1.9.3.1.13
mandatory read-only
Description: Number of REJ responses transmitted.
Settings: INTEGER
MIB Information: ulpbStatSABMCmdsRcvd
1.3.6.1.4.1.429.1.9.3.1.14
mandatory read-only
Description: Number of SABM commands received.
Settings: INTEGER
MIB Information: ulpbStatSABMCmdsTrnsmt
1.3.6.1.4.1.429.1.9.3.1.15
mandatory read-only
Description: Number of SABM commands transmitted.
Settings: INTEGER
MIB Information: ulpbStatDISCCmdsRcvd
1.3.6.1.4.1.429.1.9.3.1.16
mandatory read-only
Description: Number of DISC commands received.
Settings: INTEGER
MIB Information: ulpbStatDISCCmdsTrnsmt
1.3.6.1.4.1.429.1.9.3.1.17
mandatory read-only
Description: Number of DISC commands transmitted.
Settings: INTEGER
MIB Information: ulpbStatDMRspsRcvd
1.3.6.1.4.1.429.1.9.3.1.18
mandatory read-only
Description: Number of DM response received.
Settings: INTEGER
MIB Information: ulpbStatDMRspsTrnsmt
1.3.6.1.4.1.429.1.9.3.1.19
mandatory read-only
Description: Number of DM response transmitted.
Settings: INTEGER
MIB Information: ulpbStatUARspsRcvd
1.3.6.1.4.1.429.1.9.3.1.20
mandatory read-only
Description: Number of UA response received.
Settings: INTEGER
MIB Information: ulpbStatUARspsTrnsmt
1.3.6.1.4.1.429.1.9.3.1.21
mandatory read-only
Description: Number of UA response transmitted.
Settings: INTEGER
MIB Information: ulpbStatFRMRRspsRcvd
1.3.6.1.4.1.429.1.9.3.1.22
mandatory read-only
Description: Number of FRMR response received.
Settings: INTEGER
MIB Information: ulpbStatFRMRRspsTrnsmt
1.3.6.1.4.1.429.1.9.3.1.23
mandatory read-only
Description: Number of FRMR response transmitted.
Settings: INTEGER
MIB Information: ulpbStatIFrameCmdsRcvd
1.3.6.1.4.1.429.1.9.3.1.24
mandatory read-only
Description: Number of I-frame command received.
Settings: INTEGER
MIB Information: ulpbStatIFrameCmdsTrnsmt
1.3.6.1.4.1.429.1.9.3.1.25
mandatory read-only
Description: Number of I-frame commands transmitted.
Settings: INTEGER
Copyright © 2000 3Com Corporation.