x25wanAdmn

MIB Information: x25wanAdmn
1.3.6.1.4.1.429.1.8.1

x25wanAdmnTable

MIB Information: x25wanAdmnTable
1.3.6.1.4.1.429.1.8.1.1
not-accessible

Description: The x25 WAN Admn table contains an entry for each manageable X.25 Subnet in the chassis. It provides a means to configure serial interface associated with the subnet.

x25wanAdmnEntry

MIB Information: x25wanAdmnEntry
1.3.6.1.4.1.429.1.8.1.1.1
not-accessible

Description: There is one x25 WAN Cfg entry per x.25 subnet in the NAS chassis.

x25wanAdmnIndex

MIB Information: x25wanAdmnIndex
1.3.6.1.4.1.429.1.8.1.1.1.1
mandatory read-only

Description: A unique value for each X.25 Subnet in the chassis. The value of this object matches the value of the index of the corresponding X.25 Subnet's entry in the entity table of the chassis MIB.

Settings: INTEGER

x25wanAdmnType

MIB Information: x25wanAdmnType
1.3.6.1.4.1.429.1.8.1.1.1.2
mandatory read-write

Description: Defines which physical serial interface type is implemented.

Settings: INTEGER

Syntax Ref. Type: ENUM

(1) = rs232
(2) = v35

x25wanAdmnSpeed

MIB Information: x25wanAdmnSpeed
1.3.6.1.4.1.429.1.8.1.1.1.3
mandatory read-write

Description: Defines the serial port speed used in applications where the Gateway NAC generates a clock. This object will not effect the clock speed when the host provides the clock source. Default=57600.

Settings: INTEGER

Syntax Ref. Type: RANGE

0 = 393216

x25wanAdmnLinkAvailable

MIB Information: x25wanAdmnLinkAvailable
1.3.6.1.4.1.429.1.8.1.1.1.4
mandatory read-write

Description: Defines whether the WAN interface looks at DCD rather than DSR to determine that the physical layer is active.

Settings: INTEGER

Syntax Ref. Type: ENUM

(1) = dsr
(2) = dcd

x25wanAdmnClockSouce

MIB Information: x25wanAdmnClockSouce
1.3.6.1.4.1.429.1.8.1.1.1.5
mandatory read-write

Description: Determines the source of the synchronous data clock.

Settings: INTEGER

Syntax Ref. Type: ENUM

(1) = dceRxTx
(2) = dceRxOnly
(3) = brgRxTx

x25wanAdmnMaxFrmSize

MIB Information: x25wanAdmnMaxFrmSize
1.3.6.1.4.1.429.1.8.1.1.1.6
mandatory read-write

Description: Determines the maximum received frame size allowed on the X.25 WAN. Default=300.

Settings: INTEGER

Syntax Ref. Type: RANGE

0 = 519





Copyright © 2000 3Com Corporation.