|
|
|
|
MIB Information: x25wanStats
1.3.6.1.4.1.429.1.8.3
MIB Information: x25wanStatsTable
1.3.6.1.4.1.429.1.8.3.1
not-accessible
Description: The x25wanStatsTable is composed of counters which allow the operator to view activity which can indicate the health of the WAN connection.
MIB Information: x25wanStatsEntry
1.3.6.1.4.1.429.1.8.3.1.1
not-accessible
Description: There is one X.25 WAN status entry for each x.25 subnet installed in the NAS chassis.
MIB Information: x25wanStatsIndex
1.3.6.1.4.1.429.1.8.3.1.1.1
mandatory read-only
Description: A unique value for each X25 WAN port in the NAS chassis. The value of this index matches is the entity index associated with this X25 subnet found in the USR Chassis MIB.
Settings: INTEGER
MIB Information: x25wanStatsGoodFramesTxs
1.3.6.1.4.1.429.1.8.3.1.1.2
mandatory read-only
Description: A count of the number of good frames transmitted since this entity was initialized.
Settings: Counter
MIB Information: x25wanStatsGoodFramesRxs
1.3.6.1.4.1.429.1.8.3.1.1.3
mandatory read-only
Description: A count of the good frames received since this entity was intitalized.
Settings: Counter
MIB Information: x25wanStatsTxUnderruns
1.3.6.1.4.1.429.1.8.3.1.1.4
mandatory read-only
Description: A count of the number of transmit underruns that have been seen by this entity since initialization.
Settings: Counter
MIB Information: x25wanStatsRxOverruns
1.3.6.1.4.1.429.1.8.3.1.1.5
mandatory read-only
Description: The number of receiver overruns detected by this entity since intitialization.
Settings: Counter
MIB Information: x25wanStatsRxCrcErrs
1.3.6.1.4.1.429.1.8.3.1.1.6
mandatory read-only
Description: The number of received crc errors since this entity was intitialized.
Settings: Counter
MIB Information: x25wanStatsRxFrameNoBufs
1.3.6.1.4.1.429.1.8.3.1.1.7
mandatory read-only
Description: The number of times this entity has recieved data without a buffer to place it into.
Settings: Counter
MIB Information: x25wanStatsUnrecoveredRxs
1.3.6.1.4.1.429.1.8.3.1.1.8
mandatory read-only
Description: The number of overrun frames that the entity was unable to recover.
Settings: Counter
MIB Information: x25wanStatsRxOverflows
1.3.6.1.4.1.429.1.8.3.1.1.9
mandatory read-only
Description: The number of receive buffer overflows seen by this entity since initialization.
Settings: Counter
MIB Information: x25wanStatsRxAborts
1.3.6.1.4.1.429.1.8.3.1.1.10
mandatory read-only
Description: The number of recieve frame aborts seen by this entity since initialization.
Settings: Counter
MIB Information: x25wanStatsRxTooLongs
1.3.6.1.4.1.429.1.8.3.1.1.11
mandatory read-only
Description: The number of frames recieved that exceeded the defined maximum receive frame size.
Settings: Counter
MIB Information: x25wanStatsTxTooShorts
1.3.6.1.4.1.429.1.8.3.1.1.12
mandatory read-only
Description: The number of times that the upper protocol layers attempted to transmit too small a frame.
Settings: Counter
MIB Information: x25wanStatsRxTooShorts
1.3.6.1.4.1.429.1.8.3.1.1.13
mandatory read-only
Description: A count of the number of frames received that were smaller than the minimum frame size.
Settings: Counter
MIB Information: x25wanStatsTxBadPackets
1.3.6.1.4.1.429.1.8.3.1.1.14
mandatory read-only
Description: The number of bad packets that the WAN interface received for transmission from the upper layers of the X.25 protocol stack.
Settings: Counter
MIB Information: x25wanStatsTxRingQFulls
1.3.6.1.4.1.429.1.8.3.1.1.15
mandatory read-only
Description: A count of the number of times the circular buffer used for transmission was full when a transmission was attempted by the upper layers of the X.25 protocol stack.
Settings: Counter
MIB Information: x25wanStatsRxRingQSize
1.3.6.1.4.1.429.1.8.3.1.1.16
mandatory read-only
Description: A number that indicates the received circular queue size on the X.25 WAN.
Settings: INTEGER
MIB Information: x25wanStatsDSR
1.3.6.1.4.1.429.1.8.3.1.1.17
mandatory read-only
Description: X.25 WAN interface DSR signal status.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = off
(2) = on
MIB Information: x25wanStatsCTS
1.3.6.1.4.1.429.1.8.3.1.1.18
mandatory read-only
Description: X.25 WAN interface CTS signal status.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = off
(2) = on
MIB Information: x25wanStatsDCD
1.3.6.1.4.1.429.1.8.3.1.1.19
mandatory read-only
Description: X.25 WAN interface DCD signal status.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = off
(2) = on
Copyright © 2000 3Com Corporation.