|
|
|
|
MIB Information: uchasTrapEnable
1.3.6.1.4.1.429.1.1.8
MIB Information: uchasModuleInsertedTrapEna
1.3.6.1.4.1.429.1.1.8.1
optional read-write
Description: Enables the generation of a trap when a card is inserted into the chassis. This parameter is effective across all slots in the chassis.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enableTrap
(2) = disableAll
(3) = enableLog
(4) = enableAll
MIB Information: uchasModuleRemovedTrapEna
1.3.6.1.4.1.429.1.1.8.2
optional read-write
Description: Enables the generation of a trap when a card is removed from the chassis. This parameter is effective across all slots in the chassis.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enableTrap
(2) = disableAll
(3) = enableLog
(4) = enableAll
MIB Information: uchasPSUWarningTrapEna
1.3.6.1.4.1.429.1.1.8.3
optional read-write
Description: Enables the generation of a trap when a power supply enters a warning state such as one or more output voltages being out of range. This parameter is effective across all PSUs in the chassis.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enableTrap
(2) = disableAll
(3) = enableLog
(4) = enableAll
MIB Information: uchasPSUFailureTrapEna
1.3.6.1.4.1.429.1.1.8.4
optional read-write
Description: Enables the generation of a trap when a power supply fails and has been automatically shut down due to overvoltage overcurrent etc. This parameter is effective across all PSUs in the chassis.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enableTrap
(2) = disableAll
(3) = enableLog
(4) = enableAll
MIB Information: uchasTempWarningTrapEna
1.3.6.1.4.1.429.1.1.8.5
optional read-write
Description: Enables the generation of a trap when the temperature in the chassis as detected by the NMC becomes excessive.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enableTrap
(2) = disableAll
(3) = enableLog
(4) = enableAll
MIB Information: uchasFanFailureTrapEna
1.3.6.1.4.1.429.1.1.8.6
optional read-write
Description: Enables the generation of a trap when the fan in the chassis is not rotating with sufficient speed to cool the power supplies.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enableTrap
(2) = disableAll
(3) = enableLog
(4) = enableAll
MIB Information: uchasEntityWatchdogTrapEna
1.3.6.1.4.1.429.1.1.8.7
mandatory read-write
Description: Enables the generation of a trap when a logical networking entity in the chassis undergoes a watchdog timeout event indicating software failure.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enableTrap
(2) = disableAll
(3) = enableLog
(4) = enableAll
MIB Information: uchasEntityMgtBusFailTrapEna
1.3.6.1.4.1.429.1.1.8.8
mandatory read-write
Description: Enables the generation of a trap when the SNMP proxy agent in the NMC is unable to communicate properly with a logical networking entity in the chassis.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enableTrap
(2) = disableAll
(3) = enableLog
(4) = enableAll
MIB Information: uchasPsuIncompatible
1.3.6.1.4.1.429.1.1.8.9
mandatory read-write
Description: Enables the generation of a trap when the PSUs are not of the same ampere ratings in the chassis. Default = Enable Trap.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enableTrap
(2) = disableAll
(3) = enableLog
(4) = enableAll
MIB Information: uchasAuxOut1OpenTrapEnable
1.3.6.1.4.1.429.1.1.8.10
mandatory read-write
Description: Enables the generation of a trap when the Status of Aux Out1 changes. Default = Enable Trap.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enableTrap
(2) = disableAll
(3) = enableLog
(4) = enableAll
MIB Information: uchasAuxOut1ClosedTrapEnable
1.3.6.1.4.1.429.1.1.8.11
mandatory read-write
Description: Enables the generation of a trap when the Status of Aux Out1 changes. Default = Enable Trap.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enableTrap
(2) = disableAll
(3) = enableLog
(4) = enableAll
MIB Information: uchasAuxOut2OpenTrapEnable
1.3.6.1.4.1.429.1.1.8.12
mandatory read-write
Description: Enables the generation of a trap when the Status of Aux Out1 changes. Default = Enable Trap.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enableTrap
(2) = disableAll
(3) = enableLog
(4) = enableAll
MIB Information: uchasAuxOut2ClosedTrapEnable
1.3.6.1.4.1.429.1.1.8.13
mandatory read-write
Description: Enables the generation of a trap when the Status of Aux Out1 changes. Default = Enable Trap.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enableTrap
(2) = disableAll
(3) = enableLog
(4) = enableAll
MIB Information: uchasCommandInitiatedEna
1.3.6.1.4.1.429.1.1.8.14
mandatory read-write
Description: Enables the generation of a trap when a command has been initiated.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enableTrap
(2) = disableAll
(3) = enableLog
(4) = enableAll
MIB Information: uchasCommandFailedInitiatedEna
1.3.6.1.4.1.429.1.1.8.15
mandatory read-write
Description: Enables the generation of a trap when a command has failed to initiate.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enableTrap
(2) = disableAll
(3) = enableLog
(4) = enableAll
MIB Information: uchasCommandCompleteEna
1.3.6.1.4.1.429.1.1.8.16
mandatory read-write
Description: Enables the generation of a trap when a command has completed successfully.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enableTrap
(2) = disableAll
(3) = enableLog
(4) = enableAll
MIB Information: uchasCommandFailedCompleteEna
1.3.6.1.4.1.429.1.1.8.17
mandatory read-write
Description: Enables the generation of a trap when a command has failed to complete successfully.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enableTrap
(2) = disableAll
(3) = enableLog
(4) = enableAll
Copyright © 2000 3Com Corporation.