|
|
|
|
MIB Information: dt1Cfg
1.3.6.1.4.1.429.1.3.2
MIB Information: dt1CfgTable
1.3.6.1.4.1.429.1.3.2.1
not-accessible
Description: The Dual T1 Card Configuration Table contains an entry for each of the manageable Dual T1 Cards in the chassis. It contains objects that reflect the current configuration of parameters that affect the operation of all the entities that reside on the given card.
MIB Information: dt1CfgEntry
1.3.6.1.4.1.429.1.3.2.1.1
not-accessible
Description: There is one Dual T1 Card Configuration table entry per Dual T1 Card in the chassis.
MIB Information: dt1CfgIndex
1.3.6.1.4.1.429.1.3.2.1.1.1
mandatory read-only
Description: A unique value for each Dual T1 Card in the chassis. The value of dt1CfgIndex matches the value of the index for the corresponding Dual T1 Card entity in the entity table of the chassis MIB.
Settings: INTEGER
MIB Information: dt1CfgSpanATmgSrcPrio
1.3.6.1.4.1.429.1.3.2.1.1.2
mandatory read-write
Description: Identifies the priority at which the clock recovered from span line A is to be used as this Dual T1 Card's transmit timing source.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = notAllowed
(2) = high
(3) = mediumHigh
(4) = medium
(5) = low
MIB Information: dt1CfgSpanBTmgSrcPrio
1.3.6.1.4.1.429.1.3.2.1.1.3
mandatory read-write
Description: Identifies the priority at which the clock recovered from span line B is to be used as this Dual T1 Card's transmit timing source.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = notAllowed
(2) = high
(3) = mediumHigh
(4) = medium
(5) = low
MIB Information: dt1CfgInternTmgSrcPrio
1.3.6.1.4.1.429.1.3.2.1.1.4
mandatory read-write
Description: Identifies the priority at which this Dual T1 Card's internal clock is to be used as the transmit timing source.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = notAllowed
(2) = high
(3) = mediumHigh
(4) = medium
(5) = low
MIB Information: dt1CfgTdmBusTmgSrcPrio
1.3.6.1.4.1.429.1.3.2.1.1.5
deprecated read-only
Description: Identifies the priority at which the clock currently on the TDM bus is to be used as this Dual T1 Card's transmit timing source.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = notAllowed
(2) = high
(3) = mediumHigh
(4) = medium
(5) = low
MIB Information: dt1CfgIdleDiscPatt
1.3.6.1.4.1.429.1.3.2.1.1.6
mandatory read-write
Description: Idle disconnect pattern sent to the modems. Normal values: USA = 1 international = 84. Default = 1. Configure the modems identically. Consult the help screen user manual or US Robotics before changing.
Settings: INTEGER
Syntax Ref. Type: RANGE
0 = 255
MIB Information: dt1CfgNumT1TypeNacs
1.3.6.1.4.1.429.1.3.2.1.1.7
mandatory read-write
Description: The number of T1 and/or T1/E1-PRI NACs in the chassis.Default=multiple(3).
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = notSupported
(2) = single
(3) = multiple
MIB Information: dt1CfgCallEventFilter
1.3.6.1.4.1.429.1.3.2.1.1.8
mandatory read-write
Description: This objects provides a means to filter the types of call event traps generated. It specifies the class of calls to filter out.Default = filterOutSuccess(4).
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = notSupported
(2) = filterOutNone
(3) = filterOutBoth
(4) = filterOutSuccess
(5) = filterOutFailure
MIB Information: dt1CfgSetDs0OutofService
1.3.6.1.4.1.429.1.3.2.1.1.9
mandatory read-write
Description: This object determines to put DS0s out of service upon removal Quad Modem NAC when fixed modem routing method is engaged.Default = disable(2).
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enable
(2) = disable
MIB Information: dt1CfgWirelessMode
1.3.6.1.4.1.429.1.3.2.1.1.10
mandatory read-write
Description: This object will configure the wireless mode of operations of the T1 at power up. Default = normal(1).
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = normal
(2) = wireless
Copyright © 2000 3Com Corporation.