|
|
|
|
MIB Information: dt1Stat
1.3.6.1.4.1.429.1.3.3
MIB Information: dt1StatTable
1.3.6.1.4.1.429.1.3.3.1
not-accessible
Description: The Dual T1 Card Status table contains an entry for each of the manageable Dual T1 Cards in the chassis. It contains objects that reflect the current card specific status. Status values dynamically change during calls and they are read-only.
MIB Information: dt1StatEntry
1.3.6.1.4.1.429.1.3.3.1.1
not-accessible
Description: There is one Dual T1 Card Status entry per Dual T1 Card in the chassis.
MIB Information: dt1StatIndex
1.3.6.1.4.1.429.1.3.3.1.1.1
mandatory read-only
Description: A unique value for each Dual T1 Card in the chassis. The value of dt1StatusIndex matches the value of the index for the corresponding Dual T1 Card's entry in the entity table of the chassis MIB.
Settings: INTEGER
MIB Information: dt1StatCurrentTmgSrc
1.3.6.1.4.1.429.1.3.3.1.1.2
mandatory read-only
Description: Based on the availability of the various timing sources and the current settings of the priorities at which they are to be used the Dual T1 Card will select the current transmit timing source. This object will indicate the current timing source being used for transmit timing.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = spanLineA
(2) = spanLineB
(3) = internalClock
(4) = tdmBusClock
MIB Information: dt1StatSelfTest
1.3.6.1.4.1.429.1.3.3.1.1.3
mandatory read-only
Description: This object contains the result of the last self test command requested from the command table. It includes both destructive and non destructive results.
Settings: INTEGER
MIB Information: dt1StatUpTime
1.3.6.1.4.1.429.1.3.3.1.1.4
mandatory read-only
Description: This object contains the uptime of the NAC
Settings: INTEGER
MIB Information: dt1StatCallEventCode
1.3.6.1.4.1.429.1.3.3.1.1.5
mandatory read-only
Description: This object contains the definition of the call event codes sent in the call event trap.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = notSupported
(2) = setup
(3) = usrSetup
(4) = telcoDisconnect
(5) = usrDisconnect
(6) = noFreeModem
(7) = modemsNotAllowed
(8) = modemsRejectCall
(9) = modemSetupTimeout
(10) = noFreeIGW
(11) = igwRejectCall
(12) = igwSetupTimeout
(13) = noFreeTdmts
(14) = bcReject
(15) = ieReject
(16) = chidReject
(17) = progReject
(18) = callingPartyReject
(19) = calledPartyReject
(20) = blocked
(21) = analogBlocked
(22) = digitalBlocked
(23) = outOfService
(24) = busy
(25) = congestion
(26) = protocolError
(27) = noFreeBchannel
(28) = inOutCallCollision
(29) = inCallArrival
(30) = outCallArrival
(31) = inCallConnect
(32) = outCallConnect
MIB Information: dt1StatCallEventQ931Value
1.3.6.1.4.1.429.1.3.3.1.1.6
mandatory read-only
Description: This object contains the Q931 Call Reference Value sent in the call event trap.
Settings: INTEGER
Copyright © 2000 3Com Corporation.