|
|
|
|
MIB Information: hdmSc
1.3.6.1.4.1.429.1.22.3
MIB Information: hdmScTable
1.3.6.1.4.1.429.1.22.3.1
not-accessible
Description: Table of configurable objects which determine the operation of the Signal Converter. The quantity of entries in this table is defined by modemNumber.
MIB Information: hdmScEntry
1.3.6.1.4.1.429.1.22.3.1.1
not-accessible
Description: Objects that define the operation of the modem's Signal Converter.
MIB Information: hdmScIndex
1.3.6.1.4.1.429.1.22.3.1.1.1
mandatory read-only
Description: The unique value found in the chassis mib entity relation table that references this modem.
Settings: INTEGER
MIB Information: hdmScIndex2
1.3.6.1.4.1.429.1.22.3.1.1.2
mandatory read-only
Description: The Secondary unique value found in the chassis mib entity relation table that references this modem.
Settings: INTEGER
MIB Information: hdmScLinkRateMin
1.3.6.1.4.1.429.1.22.3.1.1.3
mandatory read-write
Description: Determines the Minimum link rate. Default=variable(1).
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = variable
(2) = bps300
(3) = bps1200
(4) = bps2400
(5) = bps4800
(6) = bps7200
(7) = bps9600
(8) = bps12000
(9) = bps14400
(10) = bps16800
(11) = bps19200
(12) = bps21600
(13) = bps24000
(14) = bps26400
(15) = bps28800
(16) = bps31200
(17) = bps33600
(18) = bps28000
(19) = bps29333
(20) = bps30666
(21) = bps32000
(22) = bps33333
(23) = bps34666
(24) = bps36000
(25) = bps37333
(26) = bps38666
(27) = bps40000
(28) = bps41333
(29) = bps42666
(30) = bps44000
(31) = bps45333
(32) = bps46666
(33) = bps48000
(34) = bps49333
(35) = bps50666
(36) = bps52000
(37) = bps53333
(38) = bps54666
(39) = bps56000
(40) = bps57333
(41) = bps58666
(42) = bps60000
(43) = bps61333
(44) = bps62666
(45) = bps64000
MIB Information: hdmScLinkRateMax
1.3.6.1.4.1.429.1.22.3.1.1.4
mandatory read-write
Description: Determines the Maximum link Rate. Default=variable(1).
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = variable
(2) = bps300
(3) = bps1200
(4) = bps2400
(5) = bps4800
(6) = bps7200
(7) = bps9600
(8) = bps12000
(9) = bps14400
(10) = bps16800
(11) = bps19200
(12) = bps21600
(13) = bps24000
(14) = bps26400
(15) = bps28800
(16) = bps31200
(17) = bps33600
(18) = bps28000
(19) = bps29333
(20) = bps30666
(21) = bps32000
(22) = bps33333
(23) = bps34666
(24) = bps36000
(25) = bps37333
(26) = bps38666
(27) = bps40000
(28) = bps41333
(29) = bps42666
(30) = bps44000
(31) = bps45333
(32) = bps46666
(33) = bps48000
(34) = bps49333
(35) = bps50666
(36) = bps52000
(37) = bps53333
(38) = bps54666
(39) = bps56000
(40) = bps57333
(41) = bps58666
(42) = bps60000
(43) = bps61333
(44) = bps62666
(45) = bps64000
MIB Information: hdmScNonArqBufSize
1.3.6.1.4.1.429.1.22.3.1.1.5
mandatory read-write
Description: Sets the size of the transmit buffer for non-ARQ mode operation to either 128 bytes or 1.5K. The smaller size is for low speed interactive applications the large size is for file transfer. Default=1.5K(1).
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = bytes1500
(2) = bytes128
MIB Information: hdmScNonMnpDataCapture
1.3.6.1.4.1.429.1.22.3.1.1.6
mandatory read-write
Description: Causes received characters to be buffered when the modem is attempting to negotiate an MNP call and the remote modem is not. Default=disabled.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = disable
(2) = enable
MIB Information: hdmScV21Mod
1.3.6.1.4.1.429.1.22.3.1.1.7
mandatory read-write
Description: When enabled the modem will answer both bell 103 and V.21 calls but originates only V.21 calls. Default=disabled.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = disable
(2) = enable
MIB Information: hdmScV32UnencodedMod
1.3.6.1.4.1.429.1.22.3.1.1.8
mandatory read-write
Description: Allows unencoded modulation in V.32 mode. Although part of the CCITT V.32 recommendation it is rarely used. Default=disabled.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = disable
(2) = enable
MIB Information: hdmScV32Mod
1.3.6.1.4.1.429.1.22.3.1.1.9
mandatory read-write
Description: Allows V.32 modulation to be disabled on USRobotics Dual Standard modems. Default=enabled.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enable
(2) = disable
MIB Information: hdmScV32Bis
1.3.6.1.4.1.429.1.22.3.1.1.10
mandatory read-write
Description: Allows V.32 bis modulation to be disabled. On USRobotics Dual Standard modems this may be useful in troubleshooting HST operation. Default=V.32 bis enabled.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enable
(2) = disable
MIB Information: hdmScV32BisEnhance
1.3.6.1.4.1.429.1.22.3.1.1.11
mandatory read-write
Description: Allows USRobotics V.32 Enhanced mode to be disabled for purposes of troubleshooting Default=enabled.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enable
(2) = disable
MIB Information: hdmScV32QuickRetrain
1.3.6.1.4.1.429.1.22.3.1.1.12
mandatory read-write
Description: Allows the faster retrains that occur with USR's enhanced V.32 mode to be disabled for troubleshooting purposes. Default=enabled.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enable
(2) = disable
MIB Information: hdmScV23
1.3.6.1.4.1.429.1.22.3.1.1.13
mandatory read-write
Description: Allows the modem to negotiate a V.23 connection(used in U.K.) after failing to negotiate a higher rate. Default=disabled.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = disable
(2) = enable
MIB Information: hdmScFallback
1.3.6.1.4.1.429.1.22.3.1.1.14
mandatory read-write
Description: Defines whether or not the modem will be allowed to change protocols it detects a significant change in the line characteristics. If the modem is unable to maintain transmission with the current modulation technique it would fall back to a lower speed and if the line then improved it would upshift to a higher speed. Default=enabled.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enable
(2) = disable
MIB Information: hdmScV32TerboModeEnable
1.3.6.1.4.1.429.1.22.3.1.1.15
mandatory read-write
Description: Allows the V32 Terbo mode to be disabled/enabled. Default=enabled.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = disable
(2) = enable
MIB Information: hdmScV34ModeEnable
1.3.6.1.4.1.429.1.22.3.1.1.16
mandatory read-write
Description: Allows V34 mode to be disabled/enabled. Default=enabled.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = disable
(2) = enable
MIB Information: hdmScVFCSymRate2400
1.3.6.1.4.1.429.1.22.3.1.1.17
mandatory read-write
Description: Allows the 2400 symbol rate to be disabled/enabled on V.FC modems. Default=enabled.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enable
(2) = disable
MIB Information: hdmScVFCSymRate2743
1.3.6.1.4.1.429.1.22.3.1.1.18
mandatory read-write
Description: Allows the 2743 symbol rate to be disabled/enabled on V.FC modems. Default=enabled.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enable
(2) = disable
MIB Information: hdmScVFCSymRate2800
1.3.6.1.4.1.429.1.22.3.1.1.19
mandatory read-write
Description: Allows the 2800 symbol rate to be disabled/enabled on V.FC modems. Default=enabled.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enable
(2) = disable
MIB Information: hdmScVFCSymRate3000
1.3.6.1.4.1.429.1.22.3.1.1.20
mandatory read-write
Description: Allows the 3000 symbol rate to be disabled/enabled on V.FC modems. Default=enabled.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enable
(2) = disable
MIB Information: hdmScVFCSymRate3200
1.3.6.1.4.1.429.1.22.3.1.1.21
mandatory read-write
Description: Allows the 3200 symbol rate to be disabled/enabled on V.FC modems. Default=enabled.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enable
(2) = disable
MIB Information: hdmScVFCSymRate3429
1.3.6.1.4.1.429.1.22.3.1.1.22
mandatory read-write
Description: Allows the 3429 symbol rate to be disabled/enabled on V.FC modems. Default=enabled.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enable
(2) = disable
MIB Information: hdmScVFC8S2DMapping
1.3.6.1.4.1.429.1.22.3.1.1.23
mandatory read-write
Description: Allows the 8S-2D mapping to be disabled/enabled on V.FC modems. Default=enabled.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enable
(2) = disable
MIB Information: hdmScVFC16S4DMapping
1.3.6.1.4.1.429.1.22.3.1.1.24
mandatory read-write
Description: Allows the 16S-4D mapping to be disabled/enabled on V.FC modems. Default=enabled.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enable
(2) = disable
MIB Information: hdmScVFC32S2DMapping
1.3.6.1.4.1.429.1.22.3.1.1.25
mandatory read-write
Description: Allows the 32S-2D mapping to be disabled/enabled on V.FC modems. Default=enabled.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enable
(2) = disable
MIB Information: hdmScVFC64S4DMapping
1.3.6.1.4.1.429.1.22.3.1.1.26
mandatory read-write
Description: Allows the 64S-4D mapping to be disabled/enabled on V.FC modems. Default=enabled.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enable
(2) = disable
MIB Information: hdmScVFCNonLinearCoding
1.3.6.1.4.1.429.1.22.3.1.1.27
mandatory read-write
Description: Allows the non-linear coding to be disabled/enabled on V.FC modems. Default=enabled.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enable
(2) = disable
MIB Information: hdmScVFCTxLevelDeviation
1.3.6.1.4.1.429.1.22.3.1.1.28
mandatory read-write
Description: Allows the TX level deviation to be disabled/enabled on V.FC modems. Default=enabled.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enable
(2) = disable
MIB Information: hdmScVFCPreEmphasis
1.3.6.1.4.1.429.1.22.3.1.1.29
mandatory read-write
Description: Allows the pre-emphasis to be disabled/enabled on V.FC modems. Default=enabled.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enable
(2) = disable
MIB Information: hdmScVFCPreCoding
1.3.6.1.4.1.429.1.22.3.1.1.30
mandatory read-write
Description: Allows the precoding to be disabled/enabled on V.FC modems. Default=enabled.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enable
(2) = disable
MIB Information: hdmScVFCShaping
1.3.6.1.4.1.429.1.22.3.1.1.31
mandatory read-write
Description: Allows the shaping to be disabled/enabled on V.FC modems. Default=enabled.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enable
(2) = disable
MIB Information: hdmScVFCModeEnable
1.3.6.1.4.1.429.1.22.3.1.1.32
mandatory read-write
Description: Allows to disable/enable V.FC mode in order to troubleshoot a connection. Default=enabled.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enable
(2) = disable
MIB Information: hdmScV8
1.3.6.1.4.1.429.1.22.3.1.1.33
mandatory read-write
Description: Allow V8 mode to be disabled/enabled. Default=enabled.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enable
(2) = disable
MIB Information: hdmSCV8CallIndicator
1.3.6.1.4.1.429.1.22.3.1.1.34
mandatory read-write
Description: Allow V.8. call indicator to be disabled/enabled. Default=disabled.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enable
(2) = disable
MIB Information: hdmScV34pModeEnable
1.3.6.1.4.1.429.1.22.3.1.1.35
mandatory read-write
Description: Allows V34 plus modulation mode to be disabled. (default=0/enabled)
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enable
(2) = disable
MIB Information: hdmScX2LowerSpeedMin
1.3.6.1.4.1.429.1.22.3.1.1.36
mandatory read-write
Description: Lower speed direction minimum speed Default=variable(1)
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = variable
(2) = bps300
(3) = bps1200
(4) = bps2400
(5) = bps4800
(6) = bps7200
(7) = bps9600
(8) = bps12000
(9) = bps14400
(10) = bps16800
(11) = bps19200
(12) = bps21600
(13) = bps24000
(14) = bps26400
(15) = bps28800
(16) = bps31200
(17) = bps33600
(18) = bps28000
(19) = bps29333
(20) = bps30666
(21) = bps32000
(22) = bps33333
(23) = bps34666
(24) = bps36000
(25) = bps37333
(26) = bps38666
(27) = bps40000
(28) = bps41333
(29) = bps42666
(30) = bps44000
(31) = bps45333
(32) = bps46666
(33) = bps48000
(34) = bps49333
(35) = bps50666
(36) = bps52000
(37) = bps53333
(38) = bps54666
(39) = bps56000
(40) = bps57333
(41) = bps58666
(42) = bps60000
(43) = bps61333
(44) = bps62666
(45) = bps64000
MIB Information: hdmScX2LowerSpeedMax
1.3.6.1.4.1.429.1.22.3.1.1.37
mandatory read-write
Description: Lower speed direction maximum speed Default=variable(1)
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = variable
(2) = bps300
(3) = bps1200
(4) = bps2400
(5) = bps4800
(6) = bps7200
(7) = bps9600
(8) = bps12000
(9) = bps14400
(10) = bps16800
(11) = bps19200
(12) = bps21600
(13) = bps24000
(14) = bps26400
(15) = bps28800
(16) = bps31200
(17) = bps33600
(18) = bps28000
(19) = bps29333
(20) = bps30666
(21) = bps32000
(22) = bps33333
(23) = bps34666
(24) = bps36000
(25) = bps37333
(26) = bps38666
(27) = bps40000
(28) = bps41333
(29) = bps42666
(30) = bps44000
(31) = bps45333
(32) = bps46666
(33) = bps48000
(34) = bps49333
(35) = bps50666
(36) = bps52000
(37) = bps53333
(38) = bps54666
(39) = bps56000
(40) = bps57333
(41) = bps58666
(42) = bps60000
(43) = bps61333
(44) = bps62666
(45) = bps64000
MIB Information: hdmScX2DisableClient
1.3.6.1.4.1.429.1.22.3.1.1.38
mandatory read-write
Description: X2 Client Mode Disable Default=enable.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enable
(2) = disable
MIB Information: hdmScX2DisableServer
1.3.6.1.4.1.429.1.22.3.1.1.39
mandatory read-write
Description: X2 Server Mode Disable Default=enable.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enable
(2) = disable
MIB Information: hdmScX2DIsableSymmetric
1.3.6.1.4.1.429.1.22.3.1.1.40
mandatory read-write
Description: X2 Symmetric Mode Disable Default=enable.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enable
(2) = disable
MIB Information: hdmSc300
1.3.6.1.4.1.429.1.22.3.1.1.53
mandatory read-write
Description: Restrict 300 baud negotiations. Register S48.0 Default is disable (0) restriction.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = disable
(2) = enable
MIB Information: hdmSc1200
1.3.6.1.4.1.429.1.22.3.1.1.54
mandatory read-write
Description: Restrict 1200 baud negotiations. Register S48.1 Default is disable (0) restriction.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = disable
(2) = enable
MIB Information: hdmSc2400
1.3.6.1.4.1.429.1.22.3.1.1.55
mandatory read-write
Description: Restrict 2400 baud negotiations. Register S48.2 Default is disable (0) restriction.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = disable
(2) = enable
MIB Information: hdmScHighSpeed
1.3.6.1.4.1.429.1.22.3.1.1.56
mandatory read-write
Description: Restrict highspeed baud negotiations. Register S48.3 Default is disable (0) restriction.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = disable
(2) = enable
MIB Information: hdmScSelectiveReject
1.3.6.1.4.1.429.1.22.3.1.1.57
mandatory read-write
Description: Selective Reject register S51.6 is a function of the V.42/LAPM protocol. The default is enable (1)
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enable
(2) = disable
MIB Information: hdmScHighPowerConst
1.3.6.1.4.1.429.1.22.3.1.1.58
mandatory read-write
Description: This object is used to enable/disable the X2 high-power constellation. This object is only valid in countries where it is legal. It corresponds to S Register 76.7 Default = Disable(1).
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = disable
(2) = enable
MIB Information: hdmScV90Analogue
1.3.6.1.4.1.429.1.22.3.1.1.59
mandatory read-write
Description: This object is used to enable/disable the V.90 client (APCM) modulation. Default= enable(1).
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enable
(2) = disable
MIB Information: hdmScV90Digital
1.3.6.1.4.1.429.1.22.3.1.1.60
mandatory read-write
Description: This object is used to enable/disable the V.90 server modulation (DPCM). Default= enable(1).
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enable
(2) = disable
MIB Information: hdmScV90AllDigital
1.3.6.1.4.1.429.1.22.3.1.1.61
mandatory read-write
Description: This object is used to enable/disable the V.90 symmetric modulation (DDPCM). Default= enable(1).
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enable
(2) = disable
MIB Information: hdmScTxPwrLvl
1.3.6.1.4.1.429.1.22.3.1.1.62
mandatory read-write
Description: This object configures the power level.
Settings: INTEGER
Syntax Ref. Type: RANGE
0 = 31
MIB Information: hdmScTxPwrLvlApplied
1.3.6.1.4.1.429.1.22.3.1.1.63
mandatory read-write
Description: This object configures where the power level is applied. It applies to S-register S81.0. Default=inputToFarEndOfCodec(1).
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = inputToFarEndOfCodec
(2) = outputOfTheServerModem
MIB Information: hdmScPiafs
1.3.6.1.4.1.429.1.22.3.1.1.64
mandatory read-write
Description: This object is used to enable or disable PIAFS protocol. Default = enable(1).
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enable
(2) = disable
MIB Information: hdmScV92Master
1.3.6.1.4.1.429.1.22.3.1.1.65
mandatory read-write
Description: This object is used to enable or disable all V92 functionalily. Equatesto S register S77.0. Default=enable.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enable
(2) = disable
MIB Information: hdmScV92PcmUpstream
1.3.6.1.4.1.429.1.22.3.1.1.66
mandatory read-write
Description: This object is used to enable or disable the V.92 PCM Upstream capability.Equates to S register S77.0.Default = enable.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enable
(2) = disable
MIB Information: hdmScV92QuickConnPhase1
1.3.6.1.4.1.429.1.22.3.1.1.67
mandatory read-write
Description: This object is used to enable or disable the V.92 Quick connect phase 1 capability.Equates to S register S77.1.Default = enable.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enable
(2) = disable
MIB Information: hdmScV92QuickConnPhase2
1.3.6.1.4.1.429.1.22.3.1.1.68
mandatory read-write
Description: This object is used to enable or disable the V.92 Quick connect phase 2 capability.Equates to S register S77.2.Default = enable.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enable
(2) = disable
MIB Information: hdmScV92ModemOnHold
1.3.6.1.4.1.429.1.22.3.1.1.69
mandatory read-write
Description: This object is used to enable or disable the V.92 Modem On hold capability with specified timeout values.Equates to S register S78.Default = Disabled.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = disabled
(2) = timeout10sec
(3) = timeout20sec
(4) = timeout30sec
(5) = timeout40sec
(6) = timeout1min
(7) = timeout2min
(8) = timeout3min
(9) = timeout4min
(10) = timeout6min
(11) = timeout8min
(12) = timeout12min
(13) = timeout16min
(14) = noTimeoutFeatureEnabled
(15) = reserved
Copyright © 2000 3Com Corporation.