|
|
|
|
MIB Information: hdmAutoResponse
1.3.6.1.4.1.429.1.22.8
MIB Information: hdmArTable
1.3.6.1.4.1.429.1.22.8.1
not-accessible
Description: Table of auto response scripts for each modem in the chassis. The number of table entries is specified by modemNumber.
MIB Information: hdmArEntry
1.3.6.1.4.1.429.1.22.8.1.1
not-accessible
Description: List of configurable auto response scripts.
MIB Information: hdmArIndex
1.3.6.1.4.1.429.1.22.8.1.1.1
optional read-only
Description: Index in to the auto response table. This index contains the unique value associated with the modem as defined in the chassis mib entity table.
Settings: INTEGER
MIB Information: hdmArIndex2
1.3.6.1.4.1.429.1.22.8.1.1.2
optional read-only
Description: Secondary Index in to the auto response table. This index contains the unique value associated with the modem as defined in the chassis mib entity table.
Settings: INTEGER
MIB Information: hdmArIncomConnectEstab
1.3.6.1.4.1.429.1.22.8.1.1.3
optional read-write
Description: This script is triggered when a Total Control WAN HUB modem establishes a connection with a remote modem. The remote modem is the caller.
Settings: OCTET STRING
Syntax Ref. Type: SIZE
0 = 40
MIB Information: hdmArOutgoConnectEstab
1.3.6.1.4.1.429.1.22.8.1.1.4
optional read-write
Description: This script is triggered when a Total Control WAN HUB modem establishes a connection with a remote modem. The Total Control WAN HUB modem is the caller.
Settings: OCTET STRING
Syntax Ref. Type: SIZE
0 = 40
MIB Information: hdmArIncomConnectTerm
1.3.6.1.4.1.429.1.22.8.1.1.5
optional read-write
Description: This script is triggered after a remote modem has called a Total Control WAN HUB modem but the connection between them terminated for some reason.
Settings: OCTET STRING
Syntax Ref. Type: SIZE
0 = 40
MIB Information: hdmArOutgoConnectTerm
1.3.6.1.4.1.429.1.22.8.1.1.6
optional read-write
Description: This script is triggered after a Total Control WAN HUB modem called a remote modem but the connection between them terminated for some reason.
Settings: OCTET STRING
Syntax Ref. Type: SIZE
0 = 40
MIB Information: hdmArConnectAttemptFail
1.3.6.1.4.1.429.1.22.8.1.1.7
optional read-write
Description: This script is triggered when a Total Control WAN HUB modem fails to connect with a remote modem for an incoming or an outgoing call.
Settings: OCTET STRING
Syntax Ref. Type: SIZE
0 = 40
MIB Information: hdmArConnectTimeExpire
1.3.6.1.4.1.429.1.22.8.1.1.8
optional read-write
Description: This script is triggered when a connection duration exceeds the user defined connection time limit.
Settings: OCTET STRING
Syntax Ref. Type: SIZE
0 = 40
MIB Information: hdmArDteXmitIdle
1.3.6.1.4.1.429.1.22.8.1.1.9
optional read-write
Description: This script is triggered when a modem's DTE remains idle for specified amount of minutes that is defined by a user.
Settings: OCTET STRING
Syntax Ref. Type: SIZE
0 = 40
MIB Information: hdmArBlersAtThresh
1.3.6.1.4.1.429.1.22.8.1.1.10
optional read-write
Description: This script is triggered when a Total Control WAN HUB modem receives a certain amount of block errors. This amount can be configured by a user.
Settings: OCTET STRING
Syntax Ref. Type: SIZE
0 = 40
MIB Information: hdmArFbacksAtThresh
1.3.6.1.4.1.429.1.22.8.1.1.11
optional read-write
Description: This script is triggered when a Total Control WAN HUB modem reaches a certain amount of fall backs within a single session. This amount can be configured by a user.
Settings: OCTET STRING
Syntax Ref. Type: SIZE
0 = 40
MIB Information: hdmArWatchdog
1.3.6.1.4.1.429.1.22.8.1.1.12
optional read-write
Description: This script is triggered when a software failure has occurred on a modem.
Settings: OCTET STRING
Syntax Ref. Type: SIZE
0 = 40
MIB Information: hdmArMgtBusFailure
1.3.6.1.4.1.429.1.22.8.1.1.13
optional read-write
Description: This script is triggered when a contact with a modem via the management bus has been lost.
Settings: OCTET STRING
Syntax Ref. Type: SIZE
0 = 40
MIB Information: hdmArMdmRingNoAnswer
1.3.6.1.4.1.429.1.22.8.1.1.14
optional read-write
Description: This script is triggered when a Total Control WAN HUB modem configured for auto answer fails to answer an incoming call within a specified number of rings. This amount is user configurable.
Settings: OCTET STRING
Syntax Ref. Type: SIZE
0 = 40
MIB Information: hdmArDteRingNoAnswer
1.3.6.1.4.1.429.1.22.8.1.1.15
optional read-write
Description: This script is triggered when a DTE fails to raise DTR in response to an incoming call for a specified amount of rings. This amount is user configurable.
Settings: OCTET STRING
Syntax Ref. Type: SIZE
0 = 40
MIB Information: hdmArNoLoopCurrent
1.3.6.1.4.1.429.1.22.8.1.1.16
optional read-write
Description: This script is triggered when a Total Control WAN HUB modem goes off hook but it does not detect the presence of loop current on an analog phone line.
Settings: OCTET STRING
Syntax Ref. Type: SIZE
0 = 40
MIB Information: hdmArTimer1
1.3.6.1.4.1.429.1.22.8.1.1.17
optional read-write
Description: This script is triggered when the first general purpose timer expires.
Settings: OCTET STRING
Syntax Ref. Type: SIZE
0 = 40
MIB Information: hdmArTimer2
1.3.6.1.4.1.429.1.22.8.1.1.18
optional read-write
Description: This script is triggered when the second general purpose timer expires.
Settings: OCTET STRING
Syntax Ref. Type: SIZE
0 = 40
MIB Information: hdmArTimer3
1.3.6.1.4.1.429.1.22.8.1.1.19
optional read-write
Description: This script is triggered when the third general purpose timer expires.
Settings: OCTET STRING
Syntax Ref. Type: SIZE
0 = 40
MIB Information: hdmArTimer4
1.3.6.1.4.1.429.1.22.8.1.1.20
optional read-write
Description: This script is triggered when the fourth general purpose timer expires.
Settings: OCTET STRING
Syntax Ref. Type: SIZE
0 = 40
Copyright © 2000 3Com Corporation.