|
|
|
|
MIB Information: hdmDi
1.3.6.1.4.1.429.1.22.9
MIB Information: hdmDiTable
1.3.6.1.4.1.429.1.22.9.1
not-accessible
Description: A table of configurable objects that define the operation of DTE interface in the modem.
MIB Information: hdmDiEntry
1.3.6.1.4.1.429.1.22.9.1.1
not-accessible
Description: Objects that define the DTE interface for a modem.
MIB Information: hdmDiIndex
1.3.6.1.4.1.429.1.22.9.1.1.1
mandatory read-only
Description: This object contains the unique value assigned to this modem in the chassis mib entity relation table and is used as the mechanism for correctly indexing into this table.
Settings: INTEGER
MIB Information: hdmDiIndex2
1.3.6.1.4.1.429.1.22.9.1.1.2
mandatory read-only
Description: This Secondary object contains the unique value assigned to this modem in the chassis mib entity relation table and is used as the mechanism for correctly indexing into this table.
Settings: INTEGER
MIB Information: hdmDiCarriageRetChar
1.3.6.1.4.1.429.1.22.9.1.1.3
mandatory read-write
Description: Specifies the decimal equivalent of the carriage return character. Default=13.
Settings: INTEGER
Syntax Ref. Type: RANGE
0 = 255
MIB Information: hdmDiLineFeedChar
1.3.6.1.4.1.429.1.22.9.1.1.4
mandatory read-write
Description: Specifies the decimal equivalent of the line feed character. Default=10.
Settings: INTEGER
Syntax Ref. Type: RANGE
0 = 255
MIB Information: hdmDiBackspaceChar
1.3.6.1.4.1.429.1.22.9.1.1.5
mandatory read-write
Description: Specifies the decimal equivalent of the backspace character. Default=8.
Settings: INTEGER
Syntax Ref. Type: RANGE
0 = 255
MIB Information: hdmDiCmdLocalEchoEna
1.3.6.1.4.1.429.1.22.9.1.1.6
mandatory read-write
Description: Defines whether or not the characters transmitted by the DTE are echoed back when in command mode. Default=disabled.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = disable
(2) = enable
MIB Information: hdmDiBreakHandling
1.3.6.1.4.1.429.1.22.9.1.1.7
mandatory read-write
Description: Defines the method used to handle received breaks. When defined as destructive the modem's transmit data buffer is flushed. When defined as expedited the break precedes any pending data in the transmit buffer. Default=DestructiveExpidited.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = destructiveNotSent
(2) = destructiveExpedited
(3) = nondestructiveExpedited
(4) = nondestructiveNotSent
MIB Information: hdmDiDteNvramLock
1.3.6.1.4.1.429.1.22.9.1.1.8
mandatory read-write
Description: When locked prohibits the DTE user from changing any of the NVRAM settings in the modem. Default=unlocked.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = disable
(2) = enable
Copyright © 2000 3Com Corporation.