|
|
|
|
MIB Information: hdr2Pte
1.3.6.1.4.1.429.4.48.3
MIB Information: hdr2PteTable
1.3.6.1.4.1.429.4.48.3.1
not-accessible
Description: A table containing the Positron Trap Enable configurations for the Hiper E1/R2 Module.
MIB Information: hdr2PteEntry
1.3.6.1.4.1.429.4.48.3.1.1
not-accessible
Description: Trap Enable Configuration parameters for the E1/R2 module.
MIB Information: hdr2PteIndex
1.3.6.1.4.1.429.4.48.3.1.1.1
mandatory read-only
Description: The index which uniquely identifies the Hiper E1/R2 Module to which this entry is applicable.
Settings: INTEGER
MIB Information: hdr2PteMultiFrame
1.3.6.1.4.1.429.4.48.3.1.1.2
mandatory read-write
Description: Enable the generation of an SNMP trap upon detection of a Multi-Frame Alignment condition on the specified DS1.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = disableAll
(2) = enableTrapOnly
(3) = enableSysLogOnly
(4) = enableAll
MIB Information: hdr2PteMultiFrameClr
1.3.6.1.4.1.429.4.48.3.1.1.3
mandatory read-write
Description: Enable the generation of an SNMP trap upon detection of clearing a Multi-Frame Alignment condition on the specified DS1.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = disableAll
(2) = enableTrapOnly
(3) = enableSysLogOnly
(4) = enableAll
MIB Information: hdr2PteRemMultiFrame
1.3.6.1.4.1.429.4.48.3.1.1.4
mandatory read-write
Description: Enable the generation of an SNMP trap upon detection of a Remote Multi-Frame Alignment condition on the specified DS1.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = disableAll
(2) = enableTrapOnly
(3) = enableSysLogOnly
(4) = enableAll
MIB Information: hdr2PteRemMultiFrameClr
1.3.6.1.4.1.429.4.48.3.1.1.5
mandatory read-write
Description: Enable the generation of an SNMP trap upon detection of clearing a Remote Multi-Frame Alignment condition on the specified DS1.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = disableAll
(2) = enableTrapOnly
(3) = enableSysLogOnly
(4) = enableAll
Copyright © 2000 3Com Corporation.