|
|
|
|
MIB Information: hdr2Te
1.3.6.1.4.1.429.4.48.4
MIB Information: hdr2TeTable
1.3.6.1.4.1.429.4.48.4.1
not-accessible
Description: A table containing the Trap Enable configurations for the Hiper E1/R2 Module.
MIB Information: hdr2TeEntry
1.3.6.1.4.1.429.4.48.4.1.1
not-accessible
Description: Trap Enable Configuration parameters for the E1/R2 module.
MIB Information: hdr2TeIndex
1.3.6.1.4.1.429.4.48.4.1.1.1
mandatory read-only
Description: The index which uniquely identifies the Hiper E1/R2 CARD to which this entry is applicable.
Settings: INTEGER
MIB Information: hdr2TeMultiFrame
1.3.6.1.4.1.429.4.48.4.1.1.2
mandatory read-write
Description: Enable the generation of an SNMP trap upon detection of a Multi-Frame Alignment condition on the specified DS1.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enableTrap
(2) = disableAll
(3) = enableLog
(4) = enableAll
MIB Information: hdr2TeMultiFrameClr
1.3.6.1.4.1.429.4.48.4.1.1.3
mandatory read-write
Description: Enable the generation of an SNMP trap upon detection of clearing a Multi-Frame Alignment condition on the specified DS1.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enableTrap
(2) = disableAll
(3) = enableLog
(4) = enableAll
MIB Information: hdr2TeRemMultiFrame
1.3.6.1.4.1.429.4.48.4.1.1.4
mandatory read-write
Description: Enable the generation of an SNMP trap upon detection of a Remote Multi-Frame Alignment condition on the specified DS1.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enableTrap
(2) = disableAll
(3) = enableLog
(4) = enableAll
MIB Information: hdr2TeRemMultiFrameClr
1.3.6.1.4.1.429.4.48.4.1.1.5
mandatory read-write
Description: Enable the generation of an SNMP trap upon detection of clearing a Remote Multi-Frame Alignment condition on the specified DS1.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enableTrap
(2) = disableAll
(3) = enableLog
(4) = enableAll
Copyright © 2000 3Com Corporation.