|
|
|
|
MIB Information: hdviStat
1.3.6.1.4.1.429.1.29.2
MIB Information: hdviStatTable
1.3.6.1.4.1.429.1.29.2.1
not-accessible
Description: A table containing the status object for the Hiper E1/R2 Module.
MIB Information: hdviStatEntry
1.3.6.1.4.1.429.1.29.2.1.1
not-accessible
Description: The VOICE OVER IP STAT parameters for the Hiper DSP CARD.
MIB Information: hdviStatIndex
1.3.6.1.4.1.429.1.29.2.1.1.1
mandatory read-only
Description: The index which uniquely identifies the Hiper per call to which this entry is applicable.
Settings: INTEGER
MIB Information: hdviStatOnTimeRtpFrames
1.3.6.1.4.1.429.1.29.2.1.1.2
obsolete read-only
Description: This parameter represents the number of RTP frames that have arrived on time at the DSP.
Settings: Counter
MIB Information: hdviStatLateRtpFrames
1.3.6.1.4.1.429.1.29.2.1.1.3
obsolete read-only
Description: This parameter represents the number of RTP frames that have arrived late at the DSP but could still be played out in the correct sequence.
Settings: Counter
MIB Information: hdviStatLostRtpFrames
1.3.6.1.4.1.429.1.29.2.1.1.4
obsolete read-only
Description: This parameter represents the number of RTP frames that have never arrived at the DSP.
Settings: Counter
MIB Information: hdviStatDiscardRtpFrame
1.3.6.1.4.1.429.1.29.2.1.1.5
obsolete read-only
Description: This parameter represents the number RTP frames that have arrived so late at the DSP that they could not be played out in the sequence.
Settings: Counter
MIB Information: hdviStatTotalRtpFrames
1.3.6.1.4.1.429.1.29.2.1.1.6
obsolete read-only
Description: The total of hdviStatOnTimeRtpFrames hdviStatLateRtpFrames hdviStatDiscardRtpFrames.
Settings: Counter
MIB Information: hdviStatOnTimeAudioPack
1.3.6.1.4.1.429.1.29.2.1.1.7
obsolete read-only
Description: This parameter represents the number of audio packets that have arrived on time at the DSP.
Settings: Counter
MIB Information: hdviStatInsertSilencePack
1.3.6.1.4.1.429.1.29.2.1.1.8
obsolete read-only
Description: This parameter represents the number of silence audio packets that have inserted into the audio stream by the DSP.
Settings: Counter
MIB Information: hdviStatReplayedPackCount
1.3.6.1.4.1.429.1.29.2.1.1.9
obsolete read-only
Description: Represents the number of audio packets that have been replayed by the DSP. This is the effective loss rate seen at the PSTN. It consists of the difference between the number of interpolated packets from the jitter buffer minus the number of packets reconstructed by FEC.
Settings: Counter
MIB Information: hdviStatCurJittBufSize
1.3.6.1.4.1.429.1.29.2.1.1.10
mandatory read-only
Description: This parameter represents the average jitter buffer size of the current call for the last 120 frames.
Settings: Gauge
MIB Information: hdviStatAveJittBufSize
1.3.6.1.4.1.429.1.29.2.1.1.11
mandatory read-only
Description: This parameter represents the average jitter buffer size of the call up to this point.
Settings: Gauge
MIB Information: hdviStatHighJittBufSize
1.3.6.1.4.1.429.1.29.2.1.1.12
mandatory read-only
Description: This parameter represents the largest jitter buffer size of the call up to this point.
Settings: Gauge
MIB Information: hdviStatLowJittBufSize
1.3.6.1.4.1.429.1.29.2.1.1.13
mandatory read-only
Description: This parameter represents the smallest jitter buffer size of the call up to this point.
Settings: Gauge
MIB Information: hdviStatTranscoderBitRate
1.3.6.1.4.1.429.1.29.2.1.1.14
mandatory read-only
Description: This parameter represents the transcoder and bit rate being received by the DSP for this call.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = g723-1-6-3-KBPS
(2) = g723-1-5-3-KBPS
(3) = g729A-8-0-KBPS
(4) = g711-uLaw-64-KBPS
(5) = g711-aLaw-64-KBPS
MIB Information: hdviStatAudioPacketTx
1.3.6.1.4.1.429.1.29.2.1.1.15
obsolete read-only
Description: This parameter represents the number of audio packets sent by the DSP.
Settings: Counter
MIB Information: hdviStatRtpFramesTx
1.3.6.1.4.1.429.1.29.2.1.1.16
obsolete read-only
Description: This parameter represents the number of RTP packets sent by the DSP.
Settings: Counter
MIB Information: hdviStatToLanFecStatus
1.3.6.1.4.1.429.1.29.2.1.1.17
mandatory read-only
Description: Represents the current state of Forward Error Correction.
Settings: INTEGER
MIB Information: hdviStatToLanFrameSize
1.3.6.1.4.1.429.1.29.2.1.1.18
mandatory read-only
Description: Represents the current frame size for sample based codecs(G.711G726etc.)
Settings: INTEGER
MIB Information: hdviStatNumAudioFramePerPktHdmtoES
1.3.6.1.4.1.429.1.29.2.1.1.19
mandatory read-only
Description: Represents the max number of audio frames per RTP packet sent from the HDM to the ES. this is only used for frame base codecs(G.723.1 G.729A etc.)
Settings: INTEGER
MIB Information: hdviStatOnTimeAudioFrames
1.3.6.1.4.1.429.1.29.2.1.1.20
mandatory read-only
Description: This parameter represents the number of audio frames that have arrived on time at the DSP.
Settings: Counter
MIB Information: hdviStatExpectedAudioFrames
1.3.6.1.4.1.429.1.29.2.1.1.21
mandatory read-only
Description: The expected audio frames is the sum of hdviStatOnTimeRtpFrames hdviStatLateRtpFrames hdviStatDiscardRtpFrames.
Settings: Counter
MIB Information: hdviStatDiscardAudioFrame
1.3.6.1.4.1.429.1.29.2.1.1.22
mandatory read-only
Description: This parameter represents the number audio frames that have arrived so late at the DSP that they could not be played out in the sequence.
Settings: Counter
MIB Information: hdviStatInterpolatedAudioFrames
1.3.6.1.4.1.429.1.29.2.1.1.23
mandatory read-only
Description: Number of audio frames that are not available when needed.
Settings: Counter
MIB Information: hdviStatReconstructedAudioFrames
1.3.6.1.4.1.429.1.29.2.1.1.24
mandatory read-only
Description: Number of audio frames recovered via FEC.
Settings: Counter
MIB Information: hdviStatOverflowEvents
1.3.6.1.4.1.429.1.29.2.1.1.25
mandatory read-only
Description: Number of times the jitter buffer has overflowed.
Settings: Counter
MIB Information: hdviStatOverflowedAudioFrames
1.3.6.1.4.1.429.1.29.2.1.1.26
mandatory read-only
Description: Number of audio frames that are discarded because they exceed the jitter buffer capacity.
Settings: Counter
MIB Information: hdviStatUnderflowEvents
1.3.6.1.4.1.429.1.29.2.1.1.27
mandatory read-only
Description: Number of times the jitter buffer has underflowed.
Settings: Counter
MIB Information: hdviStatOnTimeRtpPackets
1.3.6.1.4.1.429.1.29.2.1.1.28
mandatory read-only
Description: Represents the number of RTP packets that have arrived in sufficient time for all audio frames to be played.
Settings: Counter
MIB Information: hdviStatLateRtpPackets
1.3.6.1.4.1.429.1.29.2.1.1.29
mandatory read-only
Description: Number of RTP Packets that have arrived too late to play one or more frames.
Settings: Counter
MIB Information: hdviStatLostRtpPackets
1.3.6.1.4.1.429.1.29.2.1.1.30
mandatory read-only
Description: This parameter represents the number of RTP packets that have never arrived at the DSP.
Settings: Counter
MIB Information: hdviStatInsertSilenceFrames
1.3.6.1.4.1.429.1.29.2.1.1.31
mandatory read-only
Description: Number of audio frames that have been generated by Comfort Noise Generator.
Settings: Counter
MIB Information: hdviStatEffectiveFrameLoss
1.3.6.1.4.1.429.1.29.2.1.1.32
mandatory read-only
Description: Effective frame loss is difference between interpolated and reconstructed frames.
Settings: Counter
MIB Information: hdviStatEchoCancellerStatus
1.3.6.1.4.1.429.1.29.2.1.1.33
mandatory read-only
Description: This is the current state of Echo Canceller.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = disable
(2) = enable
MIB Information: hdviStatSilenceSuppressStatus
1.3.6.1.4.1.429.1.29.2.1.1.34
mandatory read-only
Description: Silence suppression is configured in the gateway card. This object shows the current status of silence suppression.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = disable
(2) = enable
MIB Information: hdviStatCallTypeStatus
1.3.6.1.4.1.429.1.29.2.1.1.35
mandatory read-only
Description: Reports the current value of the detected call type.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = voice
(2) = data
(3) = fax
MIB Information: hdviStatAudioFramesTx
1.3.6.1.4.1.429.1.29.2.1.1.36
mandatory read-only
Description: This parameter represents the number of audio frames sent by the DSP.
Settings: Counter
MIB Information: hdviStatRtpPacketsTx
1.3.6.1.4.1.429.1.29.2.1.1.37
mandatory read-only
Description: This parameter represents the number of RTP packets sent by the DSP.
Settings: Counter
MIB Information: hdviStatUnderflowedFrames
1.3.6.1.4.1.429.1.29.2.1.1.38
mandatory read-only
Description: Number of audio frames that are interpolated during buffer empty condition.
Settings: Counter
Copyright © 2000 3Com Corporation.