|
|
|
|
MIB Information: imdmLi
1.3.6.1.4.1.429.1.19.2
MIB Information: imdmLiTable
1.3.6.1.4.1.429.1.19.2.1
not-accessible
Description: A list of configurable Line Interface objects for a modem. The number of table entries is given by modem Number.
MIB Information: imdmLiEntry
1.3.6.1.4.1.429.1.19.2.1.1
not-accessible
Description: Objects which define the line interface characteristics for a particular modem.
MIB Information: imdmLiIndex
1.3.6.1.4.1.429.1.19.2.1.1.1
mandatory read-only
Description: Index into the Line Interface table. This index is the value from the chassis mib entity relation table that is applicable for a particular modem.
Settings: INTEGER
MIB Information: imdmLiConnTypeToCo
1.3.6.1.4.1.429.1.19.2.1.1.2
optional read-write
Description: This object is used to set the type of switch your telephone company Cental Office is using. This object coressponds with the *M AT modem command.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = pointToPoint
(2) = multipoint
MIB Information: imdmLiDN
1.3.6.1.4.1.429.1.19.2.1.1.3
optional read-write
Description: This object is to set the Directory Number (DN) that is assigned by the telephone company. This object corresponds to the *P AT modem command.
Settings: DisplayString
Syntax Ref. Type: SIZE
0 = 14
MIB Information: imdmLiSPID
1.3.6.1.4.1.429.1.19.2.1.1.4
optional read-write
Description: This object is to set the Service Profile ID (SPID) that is assigned by the telephone company. This object corresponds to the *S AT modem command.
Settings: DisplayString
Syntax Ref. Type: SIZE
0 = 18
MIB Information: imdmLiTermEndPointID
1.3.6.1.4.1.429.1.19.2.1.1.5
optional read-write
Description: This object is to set the Terminal Endpoint ID (TEI) that is assigned by the telephone company. This object corresponds to the *T AT modem command.
Settings: INTEGER
Syntax Ref. Type: RANGE
0 = 63
MIB Information: imdmLiProtTypeSw
1.3.6.1.4.1.429.1.19.2.1.1.6
optional read-write
Description: This object is to set the Switch Protocol that the telephone company uses. This object corresponds to the *W AT modem command.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = aTT5ESSCustom
(2) = northernTelecomDMS100
(3) = nationalISDN1
(4) = nationalISDN2
Copyright © 2000 3Com Corporation.