|
|
|
|
MIB Information: itgwTRCfg
1.3.6.1.4.1.429.1.42.11
MIB Information: itgwTRCfgTable
1.3.6.1.4.1.429.1.42.11.1
not-accessible
Description: This Configuration Table contains an entry for each of the manageable Internet Telephony Gateway Card in the chassis.
MIB Information: itgwTRCfgEntry
1.3.6.1.4.1.429.1.42.11.1.1
not-accessible
MIB Information: itgwTRCfgIndex
1.3.6.1.4.1.429.1.42.11.1.1.1
mandatory read-only
Description: A unique value for each Internet Telephony Gateway Card in the chassis.
Settings: INTEGER
MIB Information: itgwTRCfgArqTimeout
1.3.6.1.4.1.429.1.42.11.1.1.2
mandatory read-write
Description: This is a configurable timeout value (in msec) for an admissions request (H.225/RAS ARQ) to its Gatekeeper waiting for an ACF.Default=1350
Settings: INTEGER
Syntax Ref. Type: RANGE
150 = 5000
MIB Information: itgwTRCfgArqRetries
1.3.6.1.4.1.429.1.42.11.1.1.3
mandatory read-write
Description: This is a configurable number of ARQ retries before declaring a 'no response' scenario. Default=1
Settings: INTEGER
Syntax Ref. Type: RANGE
0 = 5
MIB Information: itgwTRCfgH255Q931CallSetupTimeout
1.3.6.1.4.1.429.1.42.11.1.1.4
mandatory read-write
Description: This is a configurable timeout value for an H.225/Q.931 SETUP request to an egress ITG waiting for an H.225/Q.931 CALL_PROCEEDING. Default=4000ms
Settings: INTEGER
Syntax Ref. Type: RANGE
1000 = 1000000
MIB Information: itgwTRCfgPapQ931CallProgressTimeout
1.3.6.1.4.1.429.1.42.11.1.1.6
mandatory read-write
Description: This is a configurable timeout value for the time between when an egress GWC sees a PAP Q.931 CALL_PROGRESS or ALERTING message from a HiPerDSP card and the time the GWC sees a PAP Q.931 CONNECT from the HiPerDSP card.Default=180000 ms
Settings: INTEGER
Syntax Ref. Type: RANGE
180000 = 1000000
MIB Information: itgwTRCfgH225CdrendTimeout
1.3.6.1.4.1.429.1.42.11.1.1.7
mandatory read-write
Description: This is a configurable timeout value for an H.225/RAS NSM CDR end to its gatekeeper waiting for a response.Default=250ms
Settings: INTEGER
Syntax Ref. Type: RANGE
50 = 5000
MIB Information: itgwTRCfgH225CdrendRetries
1.3.6.1.4.1.429.1.42.11.1.1.8
mandatory read-write
Description: A configurable number of CDR end retries before declaring a 'no response' scenario.Default=1
Settings: INTEGER
Syntax Ref. Type: RANGE
0 = 5
MIB Information: itgwTRCfgDrqTimeout
1.3.6.1.4.1.429.1.42.11.1.1.9
mandatory read-write
Description: This is a configurable timeout value for an H.225/RASDRQ to its gatekeeper waiting for a DCF response.Default=250ms
Settings: INTEGER
Syntax Ref. Type: RANGE
50 = 5000
MIB Information: itgwTRCfgDrqRetries
1.3.6.1.4.1.429.1.42.11.1.1.10
mandatory read-write
Description: This is a configurable number of DRQ retries before declaring a 'no response' scenario. Default=1
Settings: INTEGER
Syntax Ref. Type: RANGE
0 = 5
MIB Information: itgwTRCfgCallSetupTimeout
1.3.6.1.4.1.429.1.42.11.1.1.11
mandatory read-write
Description: This is a timer to 'police' the maximum time spent on trying to setup a call. This timer starts when the ingress GWC receives a PAP Q.931 SETUP message. The timer will be checked each time a timeout occurs between the H.225/Q.931 SETUP and H.225/Q.931 CALL_PROCEEDING expires to see if the ingress ITG should try the next candidate egress ITG or not. This timer will be stopped when it receives an H.225/Q.931 CALL_PROCEEDING from the egress GWC.Default=5000ms
Settings: INTEGER
Syntax Ref. Type: RANGE
10 = 300000
MIB Information: itgwTRCfgGkRegTimeout
1.3.6.1.4.1.429.1.42.11.1.1.12
mandatory read-write
Description: In the event that the GWC is unable to register with either its primary or secondary gatekeeper it will enter a state where it periodically retries its gatekeeper registration process. The time between registration attempts is configurable.Default=10000 ms
Settings: INTEGER
Syntax Ref. Type: RANGE
1000 = 65535
MIB Information: itgwTRCfgTimeToLive
1.3.6.1.4.1.429.1.42.11.1.1.13
mandatory read-write
Description: Time interval in milliseconds after which a keep alive RRQ (Registration Request) will be sent to the Gatekeeper.Default=15000
Settings: INTEGER
Syntax Ref. Type: RANGE
0 = 65535
MIB Information: itgwTRCfgGRQInterval
1.3.6.1.4.1.429.1.42.11.1.1.14
mandatory read-write
Description: Time interval (in milliseconds) after which Gateway resends a GRQ (Gatekeeper Request).Default=5000
Settings: INTEGER
Syntax Ref. Type: RANGE
0 = 65535
MIB Information: itgwTRCfgGRQRetries
1.3.6.1.4.1.429.1.42.11.1.1.15
mandatory read-write
Description: Number of times to re-send a GRQ (Gatekeeper Request).Default=2
Settings: INTEGER
Syntax Ref. Type: RANGE
0 = 65535
MIB Information: itgwTRCfgRRQDuration
1.3.6.1.4.1.429.1.42.11.1.1.16
mandatory read-write
Description: Timeout value (in milliseconds) after which Gateway resends a RRQ (Registration Request).Default=3000
Settings: INTEGER
Syntax Ref. Type: RANGE
0 = 65535
MIB Information: itgwTRCfgRRQRetries
1.3.6.1.4.1.429.1.42.11.1.1.17
mandatory read-write
Description: Number of times to resend a RRQ (Registration Request).Default=2
Settings: INTEGER
Syntax Ref. Type: RANGE
0 = 65535
MIB Information: itgwTRCfgURQDuration
1.3.6.1.4.1.429.1.42.11.1.1.18
mandatory read-write
Description: Timeout value after which Gateway resends a URQ (Unregistered Request) from Gatekeeper.Default=3000
Settings: INTEGER
Syntax Ref. Type: RANGE
0 = 65535
MIB Information: itgwTRCfgURQRetries
1.3.6.1.4.1.429.1.42.11.1.1.19
mandatory read-write
Description: Number of times to resend a URQ (Unregistered Request) from Gatekeeper.Default=1
Settings: INTEGER
Syntax Ref. Type: RANGE
0 = 65535
Copyright © 2000 3Com Corporation.