|
|
|
|
MIB Information: itgwAbCfg
1.3.6.1.4.1.429.1.42.12
MIB Information: itgwAbCfgTable
1.3.6.1.4.1.429.1.42.12.1
not-accessible
Description: This Configuration Table contains an entry for each of the manageable Internet Telephony Gateway Card in the chassis.
MIB Information: itgwAbCfgEntry
1.3.6.1.4.1.429.1.42.12.1.1
not-accessible
MIB Information: itgwAbCfgIndex
1.3.6.1.4.1.429.1.42.12.1.1.1
mandatory read-only
Description: A unique value for each Internet Telephony Gateway Card in the chassis.
Settings: INTEGER
MIB Information: itgwAbCfgAcctServerFailure
1.3.6.1.4.1.429.1.42.12.1.1.2
mandatory read-write
Description: When enabled GW will automatically busy-out all HiPerDSP spans on Accounting Server failure even if the AutoResponse script is not set up on the NMC. This option allows the GW card to more efficiently auto-busy spans on a failure and not allow calls in the system when they can't be serviced. When disabled Auto-Busy can be configured as an Auto-Response script on the NMC.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enable
(2) = disable
MIB Information: itgwAbCfgDirectoryServerFailure
1.3.6.1.4.1.429.1.42.12.1.1.3
mandatory read-write
Description: When enabled GW will automatically busy-out all HiPerDSP spans on Directory Server failure even if the AutoResponse script is not set up on the NMC. This option allows the GW card to more efficiently auto-busy spans on a failure and not allow calls in the system when they can't be serviced. When disabled Auto-Busy can be configured as an Auto-Response script on the NMC
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enable
(2) = disable
(1) = enable
(2) = disable
MIB Information: itgwAbCfgInServiceRegistration
1.3.6.1.4.1.429.1.42.12.1.1.5
mandatory read-write
Description: When enabled Gateway will automatically bring in service all HiPerDSP spans on Gateway registration even if the AutoResponse script is not setup on the NMC. This option allows the Gateway Card to more efficiently bring spans in service on a recovery.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enable
(2) = disable
(1) = enable
(2) = disable
MIB Information: itgwAbCfgGwDeregistration
1.3.6.1.4.1.429.1.42.12.1.1.4
mandatory read-write
Description: When enabled Gateway will automatically busy-out all the HiPerDSP spans on Directory Server failure event if the AutoResponse script is not set up on the NMC. This option allows the Gateway card to more efficiently auto-busy spans on a deregistration and not allow calls in the system when they can't be serviced.
Settings: INTEGER
Syntax Ref. Type: ENUM
MIB Information: itgwAbCfgAcctServerRestore
1.3.6.1.4.1.429.1.42.12.1.1.6
mandatory read-write
Description: When enabled GW will automatically busy-out all HiPerDSP spans on Accounting Server Restore even if the AutoResponse script is not set up on the NMC. This option allows the GW card to more efficiently auto-busy spans on a failure and not allow calls in the system when they can't be serviced. When disabled Auto-Busy can be configured as an Auto-Response script on the NMC.
Settings: INTEGER
Syntax Ref. Type: ENUM
MIB Information: itgwAbCfgDirectoryServerRestore
1.3.6.1.4.1.429.1.42.12.1.1.7
mandatory read-write
Description: When enabled GW will automatically busy-out all HiPerDSP spans on Directory Server Restore even if the AutoResponse script is not set up on the NMC. This option allows the GW card to more efficiently auto-busy spans on a failure and not allow calls in the system when they can't be serviced. When disabled Auto-Busy can be configured as an Auto-Response script on the NMC
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enable
(2) = disable
Copyright © 2000 3Com Corporation.