|
|
|
|
MIB Information: itgwCmd
1.3.6.1.4.1.429.1.42.13
MIB Information: itgwCmdTable
1.3.6.1.4.1.429.1.42.13.1
not-accessible
Description: This table contains objects for directing commands to the IT gateway.
MIB Information: itgwCmdEntry
1.3.6.1.4.1.429.1.42.13.1.1
not-accessible
MIB Information: itgwCmdIndex
1.3.6.1.4.1.429.1.42.13.1.1.1
mandatory read-only
Description: A unique value for each Internet Telephony Gateway Card in the chassis.
Settings: INTEGER
MIB Information: itgwCmdStationId
1.3.6.1.4.1.429.1.42.13.1.1.2
mandatory read-write
Description: This object is a read-write object that can be used to ensure that the results being viewed are the results for the command issued. To be effective each management station should set this to a unique value when issuing commands and retrieve the value of this object together with the itgwCmdReqId when getting the itgwCmdResult to detect interference from other management stations.
Settings: OCTET STRING
Syntax Ref. Type: SIZE
0 = 8
MIB Information: itgwCmdReqId
1.3.6.1.4.1.429.1.42.13.1.1.3
mandatory read-write
Description: This object is an automatic read-write object that contains the request ID from the SNMP PDU that set the latest command. It can be used to ensure that the results being viewed are the results for the command issued. To be effective each management station should set this to a unique value when issuing commands and retrieve the value of this object together with the itgwCmdMgtStationId when getting the itgwCmdResult to detect interference from other management stations.
Settings: INTEGER
MIB Information: itgwCmdFunction
1.3.6.1.4.1.429.1.42.13.1.1.4
mandatory read-write
Description: This object contains a value that defines the most recently set command function.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = noCommand
(2) = switchGateKeeper
MIB Information: itgwCmdForce
1.3.6.1.4.1.429.1.42.13.1.1.5
mandatory read-write
Description: In some cases a command may fail due to the IT gateway being in a state that would cause loss of data or connectivity. Setting this object to the value of force will over ride this condition.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = force
(2) = noForce
MIB Information: itgwCmdParam
1.3.6.1.4.1.429.1.42.13.1.1.6
mandatory read-write
Description: This object is used to pass additional parameter data for the command if needed.
Settings: OCTET STRING
Syntax Ref. Type: SIZE
0 = 24
MIB Information: itgwCmdResult
1.3.6.1.4.1.429.1.42.13.1.1.7
mandatory read-only
Description: This object returns a value that represents the status or result of the most recently issued command.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = none
(2) = success
(3) = inProgress
(4) = notSupported
(5) = unAbleToRun
(6) = aborted
(7) = failed
MIB Information: itgwCmdCode
1.3.6.1.4.1.429.1.42.13.1.1.8
mandatory read-only
Description: This object returns additional information regarding the current status or the cause of a command failure.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = noError
(2) = unable
(6) = unrecognizedCommand
(8) = slotEmpty
(12) = noResponse
(20) = unsupportedCommand
(22) = deviceDisabled
(25) = testFailed
(46) = fileTooBig
(58) = userInterfaceActive
(61) = badFlashRomID
(62) = badFlashVoltage
(63) = flashEraseError
(64) = eraseSequenceError
(65) = eraseExecutionError
(66) = receiveBufferOverflow
(68) = badProgramVoltage
(69) = programmingDataError
(70) = programCodeError
(71) = invalidCodeError
(72) = romCrcBad
(73) = pendingSoftwareDownload
(74) = ramCrcBad
(75) = invalidRomId
(84) = cardIdMismatch
(85) = cardIdUnknown
(86) = tftpTimeout
(87) = flashEraseTimeout
(88) = invalidFileHeader
(93) = bulkTransferInProcess
Copyright © 2000 3Com Corporation.