|
|
|
|
MIB Information: mdmCs
1.3.6.1.4.1.429.1.6.9
MIB Information: mdmCsTable
1.3.6.1.4.1.429.1.6.9.1
not-accessible
Description: A table of modem status and call statistic parameters for each modem in the chassis.
MIB Information: mdmCsEntry
1.3.6.1.4.1.429.1.6.9.1.1
not-accessible
Description: Objects that define the modem status and statistics specific to a the current connection when the modem is on line or to the last connection when the modem is idle.
MIB Information: mdmCsIndex
1.3.6.1.4.1.429.1.6.9.1.1.1
mandatory read-only
Description: The index value which uniquely identifies the modem to which this entry is applicable. The value corresponds to the index of the same modem in the entity table of the chassis MIB.
Settings: INTEGER
MIB Information: mdmCsStatus
1.3.6.1.4.1.429.1.6.9.1.1.2
mandatory read-only
Description: Current status of a modem including presence(idle) availability(disabled) and call progress states.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = idle
(2) = offHook
(3) = dialing
(4) = ringing
(5) = ringRcvd
(6) = linkNegotiation
(7) = onlineOriginate
(8) = onlineAnswer
(9) = localCommandMode
(10) = remoteCommandMode
(11) = lineBusiedOut
(12) = toneTest
(13) = responderTest105
(14) = responderTest102
(33) = failed
(49) = testingRom
(50) = testingRam
(51) = testingNvram
(52) = analogLoopback
(53) = localDigitalLoopback
(54) = remoteDigitalLoopback
(55) = selfTest
(56) = phoneTest
(57) = nonManagedDevice
(58) = slotEmpty
(59) = modemDisabled
(60) = notResponding
(61) = nonManagableDevice
(62) = miuFailed
MIB Information: mdmCsLastNumberDialedOut
1.3.6.1.4.1.429.1.6.9.1.1.3
mandatory read-only
Description: An ASCII string which represents the last phone number dialed by the modem.
Settings: DisplayString
Syntax Ref. Type: SIZE
0 = 40
MIB Information: mdmCsLastNumberDialedIn
1.3.6.1.4.1.429.1.6.9.1.1.4
mandatory read-only
Description: An ASCII string representing the last number dialed in(if known). This is the 950-xxx (DNIS) number.
Settings: DisplayString
Syntax Ref. Type: SIZE
0 = 40
MIB Information: mdmCsLastCallingPartyNum
1.3.6.1.4.1.429.1.6.9.1.1.5
mandatory read-only
Description: An ASCII string representing the current or last party that called this modem. Only known in ANI applications.
Settings: DisplayString
Syntax Ref. Type: SIZE
0 = 40
MIB Information: mdmCsOriginateAnswer
1.3.6.1.4.1.429.1.6.9.1.1.6
mandatory read-only
Description: Defines whether the last or current call was originated or answered.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = originateInOriginate
(2) = originateInAnswer
(3) = answerInOriginate
(4) = answerInAnswer
MIB Information: mdmCsRings
1.3.6.1.4.1.429.1.6.9.1.1.7
mandatory read-only
Description: Defines the quantity of rings detected before the DTE answered with DTR on the last incomming call.
Settings: INTEGER
MIB Information: mdmCsDisconnectReason
1.3.6.1.4.1.429.1.6.9.1.1.8
mandatory read-only
Description: Defines the reason that the last call was terminated.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = dtrDrop
(2) = escapeSequence
(3) = athCommand
(4) = carrierLoss
(5) = inactivityTimout
(6) = mnpIncompatible
(7) = undefined
(8) = remotePassword
(9) = linkPassword
(10) = retransmitLimit
(11) = linkDisconnectMsgReceived
(12) = noLoopCurrent
(13) = invalidSpeed
(14) = unableToRetrain
(15) = managementCommand
(16) = noDialTone
(17) = keyAbort
(18) = lineBusy
(19) = noAnswer
(20) = voice
(21) = noAnswerTone
(22) = noCarrier
(23) = undetermined
(24) = v42SabmeTimeout
(25) = v42BreakTimeout
(26) = v42DisconnectCmd
(27) = v42IdExchangeFail
(28) = v42BadSetup
(29) = v42InvalidCodeWord
(30) = v42StringToLong
(31) = v42InvalidCommand
(32) = none
(33) = v32Cleardown
(34) = dialSecurity
(35) = remoteAccessDenied
(36) = loopLoss
(37) = ds0Teardown
(38) = promptNotEnabled
(39) = noPromptingInSync
(40) = nonArqMode
(41) = modeIncompatible
(42) = noPromptInNonARQ
(43) = dialBackLink
(44) = linkAbort
(45) = autopassFailed
(46) = pbGenericError
(47) = pbLinkErrTxPreAck
(48) = pbLinkErrTxTardyACK
(49) = pbTransmitBusTimeout
(50) = pbReceiveBusTimeout
(51) = pbLinkErrTxTAL
(52) = pbLinkErrRxTAL
(53) = pbTransmitMasterTimeout
(54) = pbClockMissing
(55) = pbReceivedLsWhileLinkUp
(56) = pbOutOfSequenceFrame
(57) = pbBadFrame
(58) = pbAckWaitTimeout
(59) = pbReceivedAckSequenceErr
(60) = pbReceiveOvrflwRNRFailed
(61) = pbReceiveMsgBufOvrflw
(62) = rcvdGatewayDiscCmd
(63) = tokenPassingTimeout
(64) = dspInterruptTimeout
(65) = mnpProtocolViolation
(66) = class2FaxHangupCmd
(67) = hstSpeedSwitchTimeout
(68) = tooManyUnacked
(69) = timerExpired
(70) = t1Glare
(71) = priDialoutRqTimeout
(72) = abortAnlgDstOvrIsdn
(73) = normalUserCallClear
(74) = normalUnspecified
(75) = bearerIncompatibility
(76) = protocolErrorEvent
(77) = abnormalDisconnect
(78) = invalidCauseValue
(79) = resourceUnavailable
(80) = remotHungUpDuringTraining
(81) = trainingTimeout
(82) = incomingModemNotAvailable
(83) = incomingInvalidBearerCap
(84) = incomingInvalidChannelID
(85) = incomingInvalidProgInd
(86) = incomingInvalidCallingPty
(87) = incomingInvalidCalledPty
(88) = incomingCallBlock
(89) = incomingLoopStNoRingOff
(90) = outgoingTelcoDisconnect
(91) = outgoingEMWinkTimeout
(92) = outgoingEMWinkTooShort
(93) = outgoingNoChannelAvail
(94) = dspReboot
(95) = noDSPRespToKA
(96) = noDSPRespToDisc
(97) = dspTailPtrInvalid
(98) = dspHeadPtrInvalid
(99) = dataProcessingGenericErr
(100) = timeslotUnavailable
(101) = gmtTimeNotSet
(102) = chasAwarenessNotAvailable
(103) = r2InvalidChannelDirection
(104) = r2ChannelBlockedByNetwork
(105) = r2Glare
(106) = r2OutgoingCallBlocked
(107) = r2DNISNotFound
(108) = r2SigCauseCongestion
(109) = r2SigCauseUnallocNumber
(110) = r2DSPFatalError
(111) = callBlacklisted
(112) = sITDetected
(113) = faxFKSReceived
(114) = faxNormalCleardown
(115) = faxAbnormalCleardown
(116) = faxUnknownCondition
(117) = modemOnHoldCleardownReq
(118) = modemOnHoldTeardown
(119) = modemOnHoldTimeout
MIB Information: mdmCsConnectFailReason
1.3.6.1.4.1.429.1.6.9.1.1.9
mandatory read-only
Description: Defines the reason for failure if indeed the last call attempt failed.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = dtrDrop
(2) = escapeSequence
(3) = athCommand
(4) = carrierLoss
(5) = inactivityTimout
(6) = mnpIncompatible
(7) = undefined
(8) = remotePassword
(9) = linkPassword
(10) = retransmitLimit
(11) = linkDisconnectMsgReceived
(12) = noLoopCurrent
(13) = invalidSpeed
(14) = unableToRetrain
(15) = managementCommand
(16) = noDialTone
(17) = keyAbort
(18) = lineBusy
(19) = noAnswer
(20) = voice
(21) = noAnswerTone
(22) = noCarrier
(23) = undetermined
(24) = v42SabmeTimeout
(25) = v42BreakTimeout
(26) = v42DisconnectCmd
(27) = v42IdExchangeFail
(28) = v42BadSetup
(29) = v42InvalidCodeWord
(30) = v42StringToLong
(31) = v42InvalidCommand
(32) = none
(33) = v32Cleardown
(34) = dialSecurity
(35) = remoteAccessDenied
(36) = loopLoss
(37) = ds0Teardown
(38) = promptNotEnabled
(39) = noPromptingInSync
(40) = nonArqMode
(41) = modeIncompatible
(42) = noPromptInNonARQ
(43) = dialBackLink
(44) = linkAbort
(45) = autopassFailed
(46) = pbGenericError
(47) = pbLinkErrTxPreAck
(48) = pbLinkErrTxTardyACK
(49) = pbTransmitBusTimeout
(50) = pbReceiveBusTimeout
(51) = pbLinkErrTxTAL
(52) = pbLinkErrRxTAL
(53) = pbTransmitMasterTimeout
(54) = pbClockMissing
(55) = pbReceivedLsWhileLinkUp
(56) = pbOutOfSequenceFrame
(57) = pbBadFrame
(58) = pbAckWaitTimeout
(59) = pbReceivedAckSequenceErr
(60) = pbReceiveOvrflwRNRFailed
(61) = pbReceiveMsgBufOvrflw
(62) = rcvdGatewayDiscCmd
(63) = tokenPassingTimeout
(64) = dspInterruptTimeout
(65) = mnpProtocolViolation
(66) = class2FaxHangupCmd
(67) = hstSpeedSwitchTimeout
(68) = tooManyUnacked
(69) = timerExpired
(70) = t1Glare
(71) = priDialoutRqTimeout
(72) = abortAnlgDstOvrIsdn
(73) = normalUserCallClear
(74) = normalUnspecified
(75) = bearerIncompatibility
(76) = protocolErrorEvent
(77) = abnormalDisconnect
(78) = invalidCauseValue
(79) = resourceUnavailable
(80) = remotHungUpDuringTraining
(81) = trainingTimeout
(82) = incomingModemNotAvailable
(83) = incomingInvalidBearerCap
(84) = incomingInvalidChannelID
(85) = incomingInvalidProgInd
(86) = incomingInvalidCallingPty
(87) = incomingInvalidCalledPty
(88) = incomingCallBlock
(89) = incomingLoopStNoRingOff
(90) = outgoingTelcoDisconnect
(91) = outgoingEMWinkTimeout
(92) = outgoingEMWinkTooShort
(93) = outgoingNoChannelAvail
(94) = dspReboot
(95) = noDSPRespToKA
(96) = noDSPRespToDisc
(97) = dspTailPtrInvalid
(98) = dspHeadPtrInvalid
(99) = dataProcessingGenericErr
(100) = timeslotUnavailable
(101) = gmtTimeNotSet
(102) = chasAwarenessNotAvailable
(103) = r2InvalidChannelDirection
(104) = r2ChannelBlockedByNetwork
(105) = r2Glare
(106) = r2OutgoingCallBlocked
(107) = r2DNISNotFound
(108) = r2SigCauseCongestion
(109) = r2SigCauseUnallocNumber
(110) = r2DSPFatalError
(111) = callBlacklisted
(112) = sITDetected
(113) = faxFKSReceived
(114) = faxNormalCleardown
(115) = faxAbnormalCleardown
(116) = faxUnknownCondition
(117) = modemOnHoldCleardownReq
(118) = modemOnHoldTeardown
(119) = modemOnHoldTimeout
MIB Information: mdmCsInitialTxLinkRate
1.3.6.1.4.1.429.1.6.9.1.1.10
mandatory read-only
Description: The transmit speed at which the modem initialy connected on it's last or current call.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = bps110
(2) = bps300
(3) = bps600
(4) = bps1200
(5) = bps2400
(6) = bps4800
(7) = bps7200
(8) = bps9600
(9) = bps12K
(10) = bps14K
(11) = bps16K
(12) = bps19K
(13) = bps38K
(14) = bps75
(15) = bps450
(16) = unknown
(17) = bps57K
(18) = bps21K
(19) = bps24K
(20) = bps26K
(21) = bps28K
(23) = bps31K
(24) = bps33K
(25) = bps25333
(26) = bps26666
(27) = bps28000
(28) = bps29333
(29) = bps30666
(30) = bps32000
(31) = bps33333
(32) = bps34666
(33) = bps36000
(34) = bps37333
(35) = bps38666
(36) = bps40000
(37) = bps41333
(38) = bps42666
(39) = bps44000
(40) = bps45333
(41) = bps46666
(42) = bps48000
(43) = bps49333
(44) = bps50666
(45) = bps52000
(46) = bps53333
(47) = bps54666
(48) = bps56000
(49) = bps57333
(50) = bps58666
(51) = bps60000
(52) = bps61333
(53) = bps62666
(54) = bps64000
(55) = bps45
MIB Information: mdmCsInitialRxLinkRate
1.3.6.1.4.1.429.1.6.9.1.1.11
mandatory read-only
Description: The receive speed at which the modem initialy connected on it's previous or current call.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = bps110
(2) = bps300
(3) = bps600
(4) = bps1200
(5) = bps2400
(6) = bps4800
(7) = bps7200
(8) = bps9600
(9) = bps12K
(10) = bps14K
(11) = bps16K
(12) = bps19K
(13) = bps38K
(14) = bps75
(15) = bps450
(16) = unknown
(17) = bps57K
(18) = bps21K
(19) = bps24K
(20) = bps26K
(21) = bps28K
(23) = bps31K
(24) = bps33K
(25) = bps25333
(26) = bps26666
(27) = bps28000
(28) = bps29333
(29) = bps30666
(30) = bps32000
(31) = bps33333
(32) = bps34666
(33) = bps36000
(34) = bps37333
(35) = bps38666
(36) = bps40000
(37) = bps41333
(38) = bps42666
(39) = bps44000
(40) = bps45333
(41) = bps46666
(42) = bps48000
(43) = bps49333
(44) = bps50666
(45) = bps52000
(46) = bps53333
(47) = bps54666
(48) = bps56000
(49) = bps57333
(50) = bps58666
(51) = bps60000
(52) = bps61333
(53) = bps62666
(54) = bps64000
(55) = bps45
MIB Information: mdmCsFinalTxLinkRate
1.3.6.1.4.1.429.1.6.9.1.1.12
mandatory read-only
Description: The current transmit link rate of a connection or the last link rate of the last connection.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = bps110
(2) = bps300
(3) = bps600
(4) = bps1200
(5) = bps2400
(6) = bps4800
(7) = bps7200
(8) = bps9600
(9) = bps12K
(10) = bps14K
(11) = bps16K
(12) = bps19K
(13) = bps38K
(14) = bps75
(15) = bps450
(16) = unknown
(17) = bps57K
(18) = bps21K
(19) = bps24K
(20) = bps26K
(21) = bps28K
(23) = bps31K
(24) = bps33K
(25) = bps25333
(26) = bps26666
(27) = bps28000
(28) = bps29333
(29) = bps30666
(30) = bps32000
(31) = bps33333
(32) = bps34666
(33) = bps36000
(34) = bps37333
(35) = bps38666
(36) = bps40000
(37) = bps41333
(38) = bps42666
(39) = bps44000
(40) = bps45333
(41) = bps46666
(42) = bps48000
(43) = bps49333
(44) = bps50666
(45) = bps52000
(46) = bps53333
(47) = bps54666
(48) = bps56000
(49) = bps57333
(50) = bps58666
(51) = bps60000
(52) = bps61333
(53) = bps62666
(54) = bps64000
(55) = bps45
MIB Information: mdmCsFinalRxLinkRate
1.3.6.1.4.1.429.1.6.9.1.1.13
mandatory read-only
Description: The current receive link rate of a connection or the last link rate of the last connection.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = bps110
(2) = bps300
(3) = bps600
(4) = bps1200
(5) = bps2400
(6) = bps4800
(7) = bps7200
(8) = bps9600
(9) = bps12K
(10) = bps14K
(11) = bps16K
(12) = bps19K
(13) = bps38K
(14) = bps75
(15) = bps450
(16) = unknown
(17) = bps57K
(18) = bps21K
(19) = bps24K
(20) = bps26K
(21) = bps28K
(23) = bps31K
(24) = bps33K
(25) = bps25333
(26) = bps26666
(27) = bps28000
(28) = bps29333
(29) = bps30666
(30) = bps32000
(31) = bps33333
(32) = bps34666
(33) = bps36000
(34) = bps37333
(35) = bps38666
(36) = bps40000
(37) = bps41333
(38) = bps42666
(39) = bps44000
(40) = bps45333
(41) = bps46666
(42) = bps48000
(43) = bps49333
(44) = bps50666
(45) = bps52000
(46) = bps53333
(47) = bps54666
(48) = bps56000
(49) = bps57333
(50) = bps58666
(51) = bps60000
(52) = bps61333
(53) = bps62666
(54) = bps64000
(55) = bps45
MIB Information: mdmCsModulationType
1.3.6.1.4.1.429.1.6.9.1.1.14
mandatory read-only
Description: Specifies the current/final modulation type of the current or last call. The value can be different from the object mdmCsInitModulationType only for X2/V.90 calls.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = usRoboticsHST
(2) = ccittV32
(3) = ccittV22bis
(4) = bell103
(5) = ccittV21
(6) = bell212
(7) = ccittV32bis
(8) = ccittV23
(9) = noConnection
(10) = bell208b
(11) = v21FaxClass1
(12) = v27FaxClass1
(13) = v29FaxClass1
(14) = v17FaxClass1
(15) = v21FaxClass2
(16) = v27FaxClass2
(17) = v29FaxClass2
(18) = v17FaxClass2
(19) = v32Terbo
(20) = v34
(21) = vFC
(22) = v34plus
(23) = x2server
(24) = v110
(25) = v120
(26) = x75
(27) = asyncSyncPPP
(28) = clearChannel
(29) = x2client
(30) = x2symmetric
(31) = piafs
(32) = x2version2
(33) = v90Analogue
(34) = v90Digital
(35) = v90AllDigital
(36) = voip
(37) = baudot
(38) = aFAXV27
(39) = aFAXV29
(40) = aFAXV17
(41) = v21FaxClass2dot0
(42) = v27FaxClass2dot0
(43) = v29FaxClass2dot0
(44) = v17FaxClass2dot0
(45) = v92PcmUpstream
MIB Information: mdmCsSyncAsyncModeUsed
1.3.6.1.4.1.429.1.6.9.1.1.15
mandatory read-only
Description: Defines whether the current or last call was synchronous or asynchronous.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = asynchronous
(2) = synchronous
MIB Information: mdmCsErrorControlType
1.3.6.1.4.1.429.1.6.9.1.1.16
mandatory read-only
Description: Specifies the Error control settings in the current or last call. (short form)
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = none
(2) = mnpLevel3
(3) = mnpLevel4
(4) = ccittV42
(5) = usRoboticsHST
(6) = synchronousNone
(7) = mnpLevel2
(8) = mnp10
(9) = v42Etc
(10) = mnp10Ec
(11) = lapmEc
(12) = v42Etc2
(13) = ccittV42SREJ
(14) = piafs
(15) = v120
(16) = x75
MIB Information: mdmCsCompressionType
1.3.6.1.4.1.429.1.6.9.1.1.17
mandatory read-only
Description: Specifies the data compression used in the current or last call. (short format)
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = none
(2) = ccittV42bis
(3) = mnpLevel5
(4) = v44
MIB Information: mdmCsEqualizationType
1.3.6.1.4.1.429.1.6.9.1.1.18
mandatory read-only
Description: Specifies the equalization used in the current or last call.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = long
(2) = short
MIB Information: mdmCsFallbackEnabled
1.3.6.1.4.1.429.1.6.9.1.1.19
mandatory read-only
Description: Specifies whether line speed fallbacks were negotiated on the current or previous call.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = disable
(2) = enable
MIB Information: mdmCsCharsSent
1.3.6.1.4.1.429.1.6.9.1.1.20
mandatory read-only
Description: Specifies the number of characters sent on the current or previous call.
Settings: INTEGER
MIB Information: mdmCsCharsReceived
1.3.6.1.4.1.429.1.6.9.1.1.21
mandatory read-only
Description: Specifies the number of characters received in the current or previous call.
Settings: INTEGER
MIB Information: mdmCsOctetsSent
1.3.6.1.4.1.429.1.6.9.1.1.22
mandatory read-only
Description: Specifies the number of octets sent in the current or previous call.
Settings: INTEGER
MIB Information: mdmCsOctetsReceived
1.3.6.1.4.1.429.1.6.9.1.1.23
mandatory read-only
Description: Specifies the number of octets received in the current or previous call.
Settings: INTEGER
MIB Information: mdmCsBlocksSent
1.3.6.1.4.1.429.1.6.9.1.1.24
mandatory read-only
Description: Specifies the number of blocks sent in the current or previous call.
Settings: INTEGER
MIB Information: mdmCsBlocksReceived
1.3.6.1.4.1.429.1.6.9.1.1.25
mandatory read-only
Description: Specifies the number of blocks received in the current or previous call.
Settings: INTEGER
MIB Information: mdmCsBlocksResent
1.3.6.1.4.1.429.1.6.9.1.1.26
mandatory read-only
Description: Specifies the number of blocks the modem has had to retransmit due to block errors or timeouts in the current or previous call.
Settings: INTEGER
MIB Information: mdmCsRetrainsRequested
1.3.6.1.4.1.429.1.6.9.1.1.27
mandatory read-only
Description: Specifies the number of retrains requested in the current or previous call.
Settings: INTEGER
MIB Information: mdmCsRetrainsGranted
1.3.6.1.4.1.429.1.6.9.1.1.28
mandatory read-only
Description: Specifies the number of retrains granted in the current or previous call.
Settings: INTEGER
MIB Information: mdmCsLineReversalQty
1.3.6.1.4.1.429.1.6.9.1.1.29
mandatory read-only
Description: Specifies the number of times the HST high and low speeds directions have been reversed in the current or previous call.
Settings: INTEGER
MIB Information: mdmCsCharsLost
1.3.6.1.4.1.429.1.6.9.1.1.30
mandatory read-only
Description: Specifies the number of characters lost on the current or previous call. Not meaningful on synchronous calls.
Settings: INTEGER
MIB Information: mdmCsBackChannelRate
1.3.6.1.4.1.429.1.6.9.1.1.31
mandatory read-only
Description: Specifies the negotiated HST back channel speed on the current or previous call.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = bps450
(2) = bps300
(3) = none
MIB Information: mdmCsBlerQty
1.3.6.1.4.1.429.1.6.9.1.1.32
mandatory read-only
Description: Specifies the number of block errors received on the link in the current or last call.
Settings: INTEGER
MIB Information: mdmCsLinkTimeoutQty
1.3.6.1.4.1.429.1.6.9.1.1.33
mandatory read-only
Description: Specifies the number of link protocol timeouts on the current or previous call.
Settings: INTEGER
MIB Information: mdmCsFallbackQty
1.3.6.1.4.1.429.1.6.9.1.1.34
mandatory read-only
Description: Specifies the quantity of link speed fallbacks that occured on the current or previous call.
Settings: INTEGER
MIB Information: mdmCsUpshiftQty
1.3.6.1.4.1.429.1.6.9.1.1.35
mandatory read-only
Description: Specifies the number of link speed upshifts have occured in the current or previous call.
Settings: INTEGER
MIB Information: mdmCsLinkNakQty
1.3.6.1.4.1.429.1.6.9.1.1.36
mandatory read-only
Description: Specifies the quantity of negative acknowledgements sent in response to errored blocks received on the link in the current or previous call.
Settings: INTEGER
MIB Information: mdmCsGainHitCount
1.3.6.1.4.1.429.1.6.9.1.1.37
mandatory read-only
Description: The modem calculates the gain that is required to adjust the received signal to the ideal level. This defines the number of times that the gain was recalculated durring the current or previous call.
Settings: INTEGER
MIB Information: mdmCsSecurityUserName
1.3.6.1.4.1.429.1.6.9.1.1.38
mandatory read-only
Description: The last dial security user that initiated the Call. This object is not saved to NVRAM.
Settings: DisplayString
Syntax Ref. Type: SIZE
0 = 8
MIB Information: mdmCsCallDuration
1.3.6.1.4.1.429.1.6.9.1.1.39
mandatory read-only
Description: This is the length of the call in hh:mm:ss format. The maximum value reported will be 9999:59:59. For an ingress call the timer is started once the Gateway card has indicated to the modem that it can place the corresponding egress call. For an egress call the timer is started once the call is received from the gateway card. The timer is stopped once the PSTN has disconnected the call with a release or release complete.
Settings: DisplayString
Syntax Ref. Type: SIZE
0 = 10
MIB Information: mdmCsCallRefNum
1.3.6.1.4.1.429.1.6.9.1.1.40
mandatory read-only
Description: Call Reference Number
Settings: INTEGER
MIB Information: mdmCsPriCardSlot
1.3.6.1.4.1.429.1.6.9.1.1.41
mandatory read-only
Description: Primary Card Slot
Settings: INTEGER
MIB Information: mdmCsTDMTimeSlot
1.3.6.1.4.1.429.1.6.9.1.1.42
mandatory read-only
Description: Time Division Multipexing Time Slot
Settings: INTEGER
MIB Information: mdmCsPriCardSpanLine
1.3.6.1.4.1.429.1.6.9.1.1.43
mandatory read-only
Description: Primary Card Span Line
Settings: INTEGER
MIB Information: mdmCsBChannelUsed
1.3.6.1.4.1.429.1.6.9.1.1.44
mandatory read-only
Description: B Channel Used
Settings: INTEGER
MIB Information: mdmCsQCarrFreqTx
1.3.6.1.4.1.429.1.6.9.1.1.45
mandatory read-only
Description: Transmit carrier value (Hz).
Settings: INTEGER
Syntax Ref. Type: RANGE
0 = 65535
MIB Information: mdmCsQCarrFreqRx
1.3.6.1.4.1.429.1.6.9.1.1.46
mandatory read-only
Description: Receive carrier value (Hz).
Settings: INTEGER
Syntax Ref. Type: RANGE
0 = 65535
MIB Information: mdmCsQSymRateTx
1.3.6.1.4.1.429.1.6.9.1.1.47
mandatory read-only
Description: Transmit symbol rate.
Settings: INTEGER
Syntax Ref. Type: RANGE
0 = 65535
MIB Information: mdmCsQSymRateRx
1.3.6.1.4.1.429.1.6.9.1.1.48
mandatory read-only
Description: Receive symbol rate.
Settings: INTEGER
Syntax Ref. Type: RANGE
0 = 65535
MIB Information: mdmCsQTrellisTx
1.3.6.1.4.1.429.1.6.9.1.1.49
mandatory read-only
Description: Transmit Trellis coding.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = trellis8S-2D
(2) = trellis16S-4D
(3) = trellis32S-2D
(4) = trellis64S-4D
MIB Information: mdmCsQTrellisRx
1.3.6.1.4.1.429.1.6.9.1.1.50
mandatory read-only
Description: Receive Trellis coding.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = trellis8S-2D
(2) = trellis16S-4D
(3) = trellis32S-2D
(4) = trellis64S-4D
MIB Information: mdmCsQNonLinCdTx
1.3.6.1.4.1.429.1.6.9.1.1.51
mandatory read-only
Description: Status of transmit non-linear coding.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = off
(2) = on
MIB Information: mdmCsQNonLinCdRx
1.3.6.1.4.1.429.1.6.9.1.1.52
mandatory read-only
Description: Status of receive non-linear coding.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = off
(2) = on
MIB Information: mdmCsQPrecodingTx
1.3.6.1.4.1.429.1.6.9.1.1.53
mandatory read-only
Description: Status of transmit precoding.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = off
(2) = on
MIB Information: mdmCsQPrecodingRx
1.3.6.1.4.1.429.1.6.9.1.1.54
mandatory read-only
Description: Status of receive precoding.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = off
(2) = on
MIB Information: mdmCsQShapingTx
1.3.6.1.4.1.429.1.6.9.1.1.55
mandatory read-only
Description: Status of transmit shaping.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = off
(2) = on
MIB Information: mdmCsQShapingRx
1.3.6.1.4.1.429.1.6.9.1.1.56
mandatory read-only
Description: Status of receive shaping.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = off
(2) = on
MIB Information: mdmCsQPreemphTx
1.3.6.1.4.1.429.1.6.9.1.1.57
mandatory read-only
Description: Transmit pre-emphasis (-dBm).
Settings: INTEGER
Syntax Ref. Type: RANGE
0 = 65535
MIB Information: mdmCsQPreemphRx
1.3.6.1.4.1.429.1.6.9.1.1.58
mandatory read-only
Description: Receive pre-emphasis (-dBm).
Settings: INTEGER
Syntax Ref. Type: RANGE
0 = 65535
MIB Information: mdmCsQRxLevel
1.3.6.1.4.1.429.1.6.9.1.1.59
mandatory read-only
Description: Receive level (X 10) (-dBm).
Settings: INTEGER
MIB Information: mdmCsQTxLevel
1.3.6.1.4.1.429.1.6.9.1.1.60
mandatory read-only
Description: Transmit level (X 10) (-dBm).
Settings: INTEGER
MIB Information: mdmCsQSNR
1.3.6.1.4.1.429.1.6.9.1.1.61
mandatory read-only
Description: Signal to noise (x 10) (dB).
Settings: INTEGER
MIB Information: mdmCsQNearEcho
1.3.6.1.4.1.429.1.6.9.1.1.62
mandatory read-only
Description: Near echo (x 10) (dB).
Settings: INTEGER
MIB Information: mdmCsQFarEcho
1.3.6.1.4.1.429.1.6.9.1.1.63
mandatory read-only
Description: Far echo (x 10) (dB).
Settings: INTEGER
MIB Information: mdmCsQRndTripDly
1.3.6.1.4.1.429.1.6.9.1.1.64
mandatory read-only
Description: Round trip delay (msec).
Settings: INTEGER
Syntax Ref. Type: RANGE
0 = 65535
MIB Information: mdmCsQPacketSizeCurr
1.3.6.1.4.1.429.1.6.9.1.1.65
mandatory read-only
Description: Current packet size (bytes).
Settings: INTEGER
Syntax Ref. Type: RANGE
0 = 65535
MIB Information: mdmCsQPacketSizeLow
1.3.6.1.4.1.429.1.6.9.1.1.66
mandatory read-only
Description: Min. packet size (bytes).
Settings: INTEGER
Syntax Ref. Type: RANGE
0 = 65535
MIB Information: mdmCsQPacketSizeHigh
1.3.6.1.4.1.429.1.6.9.1.1.67
mandatory read-only
Description: Max. packet size (bytes).
Settings: INTEGER
Syntax Ref. Type: RANGE
0 = 65535
MIB Information: mdmCsQCellTxLevelCurr
1.3.6.1.4.1.429.1.6.9.1.1.68
mandatory read-only
Description: Current Tx level cellular (x 10)(-dBm).
Settings: INTEGER
MIB Information: mdmCsQCellTxLevelLow
1.3.6.1.4.1.429.1.6.9.1.1.69
mandatory read-only
Description: Min. Tx level cellular (x 10)(-dBm).
Settings: INTEGER
MIB Information: mdmCsQCellTxLevelHigh
1.3.6.1.4.1.429.1.6.9.1.1.70
mandatory read-only
Description: Max. Tx level cellular (x 10)(-dBm).
Settings: INTEGER
MIB Information: mdmCsQSNRLevelCurr
1.3.6.1.4.1.429.1.6.9.1.1.71
mandatory read-only
Description: Current SNR level cellular (x 10) (-dBm).
Settings: INTEGER
MIB Information: mdmCsQSNRLevelLow
1.3.6.1.4.1.429.1.6.9.1.1.72
mandatory read-only
Description: Min. SNR level cellular (x 10) (-dBm).
Settings: INTEGER
MIB Information: mdmCsQSNRLevelHigh
1.3.6.1.4.1.429.1.6.9.1.1.73
mandatory read-only
Description: Max. SNR level cellular (x 10) (-dBm).
Settings: INTEGER
MIB Information: mdmCsQCellularProt
1.3.6.1.4.1.429.1.6.9.1.1.74
mandatory read-only
Description: Current cellular protocol.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = none
(2) = mnp10
(3) = mnp10ec
(4) = v42etc
MIB Information: mdmCsFreqProbeData
1.3.6.1.4.1.429.1.6.9.1.1.75
mandatory read-only
Description: Probe frequency.
Settings: OCTET STRING
Syntax Ref. Type: SIZE
0 = 60
MIB Information: mdmCsLevelProbeData
1.3.6.1.4.1.429.1.6.9.1.1.76
mandatory read-only
Description: Probe level.
Settings: OCTET STRING
Syntax Ref. Type: SIZE
0 = 30
MIB Information: mdmCsQTimingOffset
1.3.6.1.4.1.429.1.6.9.1.1.77
mandatory read-only
Description: Timing Offset in parts per million.
Settings: INTEGER
Syntax Ref. Type: RANGE
0 = 65535
MIB Information: mdmCsQCarrierOffset
1.3.6.1.4.1.429.1.6.9.1.1.78
mandatory read-only
Description: Carrier Offset in Hertz.
Settings: INTEGER
Syntax Ref. Type: RANGE
0 = 65535
MIB Information: mdmCsQCoding
1.3.6.1.4.1.429.1.6.9.1.1.80
mandatory read-only
Description: PCM Coding mu/A law Default=mulaw.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = mulaw
(2) = alaw
MIB Information: mdmCsTrainingInfo
1.3.6.1.4.1.429.1.6.9.1.1.81
mandatory read-only
Description: Training Information
Settings: OCTET STRING
Syntax Ref. Type: SIZE
0 = 255
MIB Information: mdmCsX2signature
1.3.6.1.4.1.429.1.6.9.1.1.82
mandatory read-only
Description: X2 diagnostics information from modem in hex.
Settings: OCTET STRING
Syntax Ref. Type: SIZE
0 = 255
MIB Information: mdmCsX2Status
1.3.6.1.4.1.429.1.6.9.1.1.83
mandatory read-only
Description: x2 status of modem.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = x2v90NotOperational
(2) = x2Operational
(3) = v8DisabledLocal
(4) = x2DisabledLocal
(5) = baud3200DisabledLocal
(6) = speedLimitedLocal
(7) = v8notDetectedFromRemote
(8) = x2notDetectedFromRemote
(9) = incompatibleX2Versions
(10) = incompatibleX2Modes
(11) = baud3200DisabledRemote
(12) = excessiveHFAttenuation
(13) = channelNoSymbolRate
(14) = exitBeforeX2Connect
(15) = v90Operational
(16) = x2v90Operational
(17) = v90DisabledLocal
(18) = x2v90DisabledLocal
(19) = v90SymRatesDisabledLcl
(20) = v90NotDetectedFrmRemote
(21) = x2v90NotDetectedFrmRmt
(22) = incompatibleV90Versions
(23) = incompatibleV90Modes
(24) = v90IncompactibleSymRate
MIB Information: mdmCsCallType
1.3.6.1.4.1.429.1.6.9.1.1.84
mandatory read-only
Description: Call type information.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = analogCall
(2) = chT1WinkStart
(3) = chT1ImmediateStart
(4) = chT1LoopStart
(5) = chT1GroundStart
(6) = chT1PRICall
MIB Information: mdmCsCallStartTime
1.3.6.1.4.1.429.1.6.9.1.1.85
mandatory read-only
Description: Call started time in GMT format.
Settings: INTEGER
MIB Information: mdmCsCallEndTime
1.3.6.1.4.1.429.1.6.9.1.1.86
mandatory read-only
Description: Call Ended time in GMT format.
Settings: INTEGER
MIB Information: mdmCsDigitalPadAttenuated
1.3.6.1.4.1.429.1.6.9.1.1.87
mandatory read-only
Description: Attenuation of the digital pad in tenths of DB.
Settings: INTEGER
Syntax Ref. Type: RANGE
0 = 255
MIB Information: mdmCsInitModulationType
1.3.6.1.4.1.429.1.6.9.1.1.88
mandatory read-only
Description: Specifies the modulation type of the current or last call. The value can be different from the object mdmCsModulationType only for X2/V.90 calls.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = usRoboticsHST
(2) = ccittV32
(3) = ccittV22bis
(4) = bell103
(5) = ccittV21
(6) = bell212
(7) = ccittV32bis
(8) = ccittV23
(9) = noConnection
(10) = bell208b
(11) = v21FaxClass1
(12) = v27FaxClass1
(13) = v29FaxClass1
(14) = v17FaxClass1
(15) = v21FaxClass2
(16) = v27FaxClass2
(17) = v29FaxClass2
(18) = v17FaxClass2
(19) = v32Terbo
(20) = v34
(21) = vFC
(22) = v34plus
(23) = x2server
(24) = v110
(25) = v120
(26) = x75
(27) = asyncSyncPPP
(28) = clearChannel
(29) = x2client
(30) = x2symmetric
(31) = piafs
(32) = x2version2
(33) = v90Analogue
(34) = v90Digital
(35) = v90AllDigital
(36) = voip
(37) = baudot
(38) = aFAXV27
(39) = aFAXV29
(40) = aFAXV17
(41) = v21FaxClass2dot0
(42) = v27FaxClass2dot0
(43) = v29FaxClass2dot0
(44) = v17FaxClass2dot0
(45) = v92PcmUpstream
MIB Information: mdmCsRxMinSpeed
1.3.6.1.4.1.429.1.6.9.1.1.89
mandatory read-only
Description: Current/Last Session MIN Rx Speed.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = bps110
(2) = bps300
(3) = bps600
(4) = bps1200
(5) = bps2400
(6) = bps4800
(7) = bps7200
(8) = bps9600
(9) = bps12K
(10) = bps14K
(11) = bps16K
(12) = bps19K
(13) = bps38K
(14) = bps75
(15) = bps450
(16) = unknown
(17) = bps57K
(18) = bps21K
(19) = bps24K
(20) = bps26K
(21) = bps28K
(23) = bps31K
(24) = bps33K
(25) = bps25333
(26) = bps26666
(27) = bps28000
(28) = bps29333
(29) = bps30666
(30) = bps32000
(31) = bps33333
(32) = bps34666
(33) = bps36000
(34) = bps37333
(35) = bps38666
(36) = bps40000
(37) = bps41333
(38) = bps42666
(39) = bps44000
(40) = bps45333
(41) = bps46666
(42) = bps48000
(43) = bps49333
(44) = bps50666
(45) = bps52000
(46) = bps53333
(47) = bps54666
(48) = bps56000
(49) = bps57333
(50) = bps58666
(51) = bps60000
(52) = bps61333
(53) = bps62666
(54) = bps64000
(55) = bps45
MIB Information: mdmCsRxMaxSpeed
1.3.6.1.4.1.429.1.6.9.1.1.90
mandatory read-only
Description: Current/Last Session MAX Rx Speed.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = bps110
(2) = bps300
(3) = bps600
(4) = bps1200
(5) = bps2400
(6) = bps4800
(7) = bps7200
(8) = bps9600
(9) = bps12K
(10) = bps14K
(11) = bps16K
(12) = bps19K
(13) = bps38K
(14) = bps75
(15) = bps450
(16) = unknown
(17) = bps57K
(18) = bps21K
(19) = bps24K
(20) = bps26K
(21) = bps28K
(23) = bps31K
(24) = bps33K
(25) = bps25333
(26) = bps26666
(27) = bps28000
(28) = bps29333
(29) = bps30666
(30) = bps32000
(31) = bps33333
(32) = bps34666
(33) = bps36000
(34) = bps37333
(35) = bps38666
(36) = bps40000
(37) = bps41333
(38) = bps42666
(39) = bps44000
(40) = bps45333
(41) = bps46666
(42) = bps48000
(43) = bps49333
(44) = bps50666
(45) = bps52000
(46) = bps53333
(47) = bps54666
(48) = bps56000
(49) = bps57333
(50) = bps58666
(51) = bps60000
(52) = bps61333
(53) = bps62666
(54) = bps64000
(55) = bps45
MIB Information: mdmCsTxMinSpeed
1.3.6.1.4.1.429.1.6.9.1.1.91
mandatory read-only
Description: Current/Last Session MIN Tx Speed.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = bps110
(2) = bps300
(3) = bps600
(4) = bps1200
(5) = bps2400
(6) = bps4800
(7) = bps7200
(8) = bps9600
(9) = bps12K
(10) = bps14K
(11) = bps16K
(12) = bps19K
(13) = bps38K
(14) = bps75
(15) = bps450
(16) = unknown
(17) = bps57K
(18) = bps21K
(19) = bps24K
(20) = bps26K
(21) = bps28K
(23) = bps31K
(24) = bps33K
(25) = bps25333
(26) = bps26666
(27) = bps28000
(28) = bps29333
(29) = bps30666
(30) = bps32000
(31) = bps33333
(32) = bps34666
(33) = bps36000
(34) = bps37333
(35) = bps38666
(36) = bps40000
(37) = bps41333
(38) = bps42666
(39) = bps44000
(40) = bps45333
(41) = bps46666
(42) = bps48000
(43) = bps49333
(44) = bps50666
(45) = bps52000
(46) = bps53333
(47) = bps54666
(48) = bps56000
(49) = bps57333
(50) = bps58666
(51) = bps60000
(52) = bps61333
(53) = bps62666
(54) = bps64000
(55) = bps45
MIB Information: mdmCsTxMaxSpeed
1.3.6.1.4.1.429.1.6.9.1.1.92
mandatory read-only
Description: Current/Last Session MAX Tx Speed.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = bps110
(2) = bps300
(3) = bps600
(4) = bps1200
(5) = bps2400
(6) = bps4800
(7) = bps7200
(8) = bps9600
(9) = bps12K
(10) = bps14K
(11) = bps16K
(12) = bps19K
(13) = bps38K
(14) = bps75
(15) = bps450
(16) = unknown
(17) = bps57K
(18) = bps21K
(19) = bps24K
(20) = bps26K
(21) = bps28K
(23) = bps31K
(24) = bps33K
(25) = bps25333
(26) = bps26666
(27) = bps28000
(28) = bps29333
(29) = bps30666
(30) = bps32000
(31) = bps33333
(32) = bps34666
(33) = bps36000
(34) = bps37333
(35) = bps38666
(36) = bps40000
(37) = bps41333
(38) = bps42666
(39) = bps44000
(40) = bps45333
(41) = bps46666
(42) = bps48000
(43) = bps49333
(44) = bps50666
(45) = bps52000
(46) = bps53333
(47) = bps54666
(48) = bps56000
(49) = bps57333
(50) = bps58666
(51) = bps60000
(52) = bps61333
(53) = bps62666
(54) = bps64000
(55) = bps45
MIB Information: mdmCsCollectedDTMFDigits
1.3.6.1.4.1.429.1.6.9.1.1.93
mandatory read-only
Description: This object is an ASCII array of the DTMF digits collected from the client.
Settings: OCTET STRING
Syntax Ref. Type: SIZE
0 = 64
Copyright © 2000 3Com Corporation.