|
|
|
|
MIB Information: mdmEc
1.3.6.1.4.1.429.1.6.8
MIB Information: mdmEcTable
1.3.6.1.4.1.429.1.6.8.1
not-accessible
Description: A table of Error Control Parameters for each modem in this system the quantity of entries is given by modemNumber.
MIB Information: mdmEcEntry
1.3.6.1.4.1.429.1.6.8.1.1
not-accessible
Description: Configurable objects which define the modems error control operation.
MIB Information: mdmEcIndex
1.3.6.1.4.1.429.1.6.8.1.1.1
mandatory read-only
Description: This object contains the unique value assigned to this modem in the chassis mib entity relation table and is used as the mechanism for correctly indexing into this table.
Settings: INTEGER
MIB Information: mdmEcMnp3Dis
1.3.6.1.4.1.429.1.6.8.1.1.2
mandatory read-write
Description: Determines if the modem will negotiate for MNP level 3 error correction. Default=enable.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enable
(2) = disable
MIB Information: mdmEcMnp4Dis
1.3.6.1.4.1.429.1.6.8.1.1.3
mandatory read-write
Description: Determines if the modem will negotiate for MNP level 4 error correction. Default=enable.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enable
(2) = disable
MIB Information: mdmEcMnpUnusual
1.3.6.1.4.1.429.1.6.8.1.1.4
mandatory read-write
Description: Determines if the modem will attempt to negotiate for MNP operation used in some early 2400bps modems. Default=disable.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = disable
(2) = enable
MIB Information: mdmEcV42MnpHandshake
1.3.6.1.4.1.429.1.6.8.1.1.5
mandatory read-write
Description: Determines what types of error correction the modem will attempt to negotiate. When configured for the default full V.42 and MNP the modem first tries to connect with V42 error control and then with MNP error control. When set to disable either V42 or MNP the modem will only attempt to negotiate the enabled protocol. When set to disable the V42 detect phase it is not included in the handshaking process. This allows for faster connections between V42 modems.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enableAll
(2) = enableV42disableMnp
(3) = disablev42enablemnp
(4) = disableDetectionPhase
Copyright © 2000 3Com Corporation.