|
|
|
|
MIB Information: mdmCd
1.3.6.1.4.1.429.1.6.12
MIB Information: mdmCdTable
1.3.6.1.4.1.429.1.6.12.1
not-accessible
Description: The command table contains an entry for each modem installed in a chassis. It provides a means for processing actions requested by the management console. The mechanism used is to set the command and get the result which will indicate the success of the request.
MIB Information: mdmCdEntry
1.3.6.1.4.1.429.1.6.12.1.1
not-accessible
Description: Objects that are used to request that certain actions be taken by the modem itself or that the NMC take certain actions for the modem.
MIB Information: mdmCdIndex
1.3.6.1.4.1.429.1.6.12.1.1.1
mandatory read-only
Description: The index value which uniquely identifies the modem to which this entry is applicable. The value corresponds to the index of the corresponding modem in the entity table of the chassis MIB.
Settings: INTEGER
MIB Information: mdmCdMgtStationId
1.3.6.1.4.1.429.1.6.12.1.1.2
mandatory read-write
Description: This object is a generic read-write variable that a Management Station (MS) can use to guarantee that the results from a given command are the results of a command issued by that specific MS. Each MS must SET a unique value to this object when doing commands and GET the value of this object together with uchasCmdReqId and uchasCmdResult to detect interference from other MSs.
Settings: OCTET STRING
Syntax Ref. Type: SIZE
0 = 8
MIB Information: mdmCdReqId
1.3.6.1.4.1.429.1.6.12.1.1.3
mandatory read-write
Description: This object contains the value of the request-id field in the SNMP PDU which invoked the most recent command or test on this modem. If the request-id is unknown or undefined this object contains the value zero.
Settings: INTEGER
MIB Information: mdmCdFunction
1.3.6.1.4.1.429.1.6.12.1.1.4
mandatory read-write
Description: This object contains a value that describes the command that is being invoked.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = noCommand
(2) = softwareReset
(3) = storeToNvram
(4) = restoreFromDflt
(5) = restoreFromNvram
(6) = offHook
(7) = onHook
(8) = sndTone
(9) = rcvTone
(10) = endTest
(11) = rspndrTest105
(12) = rspndrTest102
(13) = lclAnlgLpbk
(14) = lclDgtlLpbk
(15) = rmtDgtlLpbk
(16) = selfTest
(17) = testRam
(18) = testRom
(19) = testNVRAM
(20) = v54LclAnlgLpbk
(21) = v54RmtDgtlLpbk
(22) = idlePhoneLine
(23) = loadHwFlowDflt
(24) = loadSwFlowDflt
(25) = loadMnp10CllulrDflt
(26) = loadV42CllulrMblDflt
(27) = loadV42CllulrFxdDflt
(33) = hardBusyAtDisable
(34) = softBusyAtDisable
(35) = restoreLineAt
MIB Information: mdmCdForce
1.3.6.1.4.1.429.1.6.12.1.1.5
mandatory read-write
Description: In certain cases the modem may be in a state where certain commands could adversely affect connectiuons. In such cases a command request with this object not present or set to noForce will result in a warning. If the operator elects to ignore such warnings this object can be set to force in a subsequent request to cause the command to be carried out regardless of the potetialy hazzerdous effect.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = force
(2) = noForce
MIB Information: mdmCdParam
1.3.6.1.4.1.429.1.6.12.1.1.6
mandatory read-write
Description: This object can contain parameters that are specific to the particualar command being issued.
Settings: OCTET STRING
Syntax Ref. Type: SIZE
0 = 24
MIB Information: mdmCdResult
1.3.6.1.4.1.429.1.6.12.1.1.7
mandatory read-only
Description: This object contains the result of the most recently requested command or test or the value none(1) if no commands have been requested since last reset.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = none
(2) = success
(3) = inProgress
(4) = notSupported
(5) = unAbleToRun
(6) = aborted
(7) = failed
MIB Information: mdmCdCode
1.3.6.1.4.1.429.1.6.12.1.1.8
mandatory read-only
Description: The value of this object indicates a further description of what went wrong when a command fails.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = noError
(2) = unable
(6) = unrecognizedCommand
(8) = slotEmpty
(12) = noResponse
(13) = notConnected
(14) = connected
(17) = onLine
(20) = unsupportedCommand
(22) = deviceDisabled
(24) = deviceInTestMode
(25) = testFailed
(31) = deviceInSecurityMode
(51) = noRTS
(52) = noDTR
(53) = wrongLoopbackSpeed
(54) = noLoopbackInARQ
(73) = pendingSoftwareDownload
(89) = invalidFrequency
(90) = noLoopCurrent
(91) = noDialTone
(92) = noLineDetected
Copyright © 2000 3Com Corporation.