|
|
|
|
MIB Information: mdmTe
1.3.6.1.4.1.429.1.6.13
MIB Information: mdmTeTable
1.3.6.1.4.1.429.1.6.13.1
not-accessible
Description: A table containing an enable for each trap that a modem entity is capable of generating. Some of these events occur often and traps may flood the network if care is not taken to avoid such conditions. These traps should be enabled sparingly. (usually only when debugging a problem on a particular modem)
MIB Information: mdmTeEntry
1.3.6.1.4.1.429.1.6.13.1.1
not-accessible
Description: There is one modem trap enable row for each modem entity in the NAS chassis.
MIB Information: mdmTeIndex
1.3.6.1.4.1.429.1.6.13.1.1.1
mandatory read-only
Description: A unique index which identifies the modem for which these trap enables pertain. The index to the trap enable table matches the index of the corresponding modem in the entity table in the chassis MIB.
Settings: INTEGER
MIB Information: mdmTeInConnEstablished
1.3.6.1.4.1.429.1.6.13.1.1.2
mandatory read-write
Description: Enables generation of an SNMP trap upon detection of an incoming connection establishment on the specified modem.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enableTrap
(2) = disableAll
(3) = enableLog
(4) = enableAll
MIB Information: mdmTeOutConnEstablished
1.3.6.1.4.1.429.1.6.13.1.1.3
mandatory read-write
Description: Enables generation of an SNMP trap upon detection of an outgoing connection establishment on the specified modem.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enableTrap
(2) = disableAll
(3) = enableLog
(4) = enableAll
MIB Information: mdmTeInConnTerminated
1.3.6.1.4.1.429.1.6.13.1.1.4
mandatory read-write
Description: Enables generation of an SNMP trap upon detection of an incoming connection termination on the specified modem.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enableTrap
(2) = disableAll
(3) = enableLog
(4) = enableAll
MIB Information: mdmTeOutConnTerminated
1.3.6.1.4.1.429.1.6.13.1.1.5
mandatory read-write
Description: Enables generation of an SNMP trap upon detection of an outgoing connection terminated on the specified modem.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enableTrap
(2) = disableAll
(3) = enableLog
(4) = enableAll
MIB Information: mdmTeConnAttemptFailure
1.3.6.1.4.1.429.1.6.13.1.1.6
mandatory read-write
Description: Enables generation of an SNMP trap upon detection of a connection attemp failure on the specified modem.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enableTrap
(2) = disableAll
(3) = enableLog
(4) = enableAll
MIB Information: mdmTeConnLimitExpired
1.3.6.1.4.1.429.1.6.13.1.1.7
mandatory read-write
Description: Enables generation of an SNMP trap upon detection of the expiration of the connection time limit on the specified modem.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enableTrap
(2) = disableAll
(3) = enableLog
(4) = enableAll
MIB Information: mdmTeDteXmitDataIdle
1.3.6.1.4.1.429.1.6.13.1.1.8
mandatory read-write
Description: Enables generation of an SNMP trap upon detection of DTE transmit data idle on the specified modem.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enableTrap
(2) = disableAll
(3) = enableLog
(4) = enableAll
MIB Information: mdmTeDtrTrue
1.3.6.1.4.1.429.1.6.13.1.1.9
mandatory read-write
Description: Enables generation of an SNMP trap upon detection of DTR going true on the specified modem.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enableTrap
(2) = disableAll
(3) = enableLog
(4) = enableAll
MIB Information: mdmTeDtrFalse
1.3.6.1.4.1.429.1.6.13.1.1.10
mandatory read-write
Description: Enables generation of an SNMP trap upon detection of DTR going false on the specified modem.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enableTrap
(2) = disableAll
(3) = enableLog
(4) = enableAll
MIB Information: mdmTeBlerCountAtThresh
1.3.6.1.4.1.429.1.6.13.1.1.11
mandatory read-write
Description: Enables generation of an SNMP trap upon detection of the BLER count at the specified threshold on the specified modem.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enableTrap
(2) = disableAll
(3) = enableLog
(4) = enableAll
MIB Information: mdmTeFallbkCountAtThresh
1.3.6.1.4.1.429.1.6.13.1.1.12
mandatory read-write
Description: Enables generation of an SNMP trap upon detection of the fallback count at the specified threshold on the specified modem.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enableTrap
(2) = disableAll
(3) = enableLog
(4) = enableAll
MIB Information: mdmTeNoDialTone
1.3.6.1.4.1.429.1.6.13.1.1.13
mandatory read-write
Description: Enables generation of an SNMP trap upon detection of no dial tone on the specified modem.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enableTrap
(2) = disableAll
(3) = enableLog
(4) = enableAll
MIB Information: mdmTeNoLoopCurrent
1.3.6.1.4.1.429.1.6.13.1.1.14
mandatory read-write
Description: Enables generation of an SNMP trap upon detection of no loop current on the specified modem.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enableTrap
(2) = disableAll
(3) = enableLog
(4) = enableAll
MIB Information: mdmTeResetByDTE
1.3.6.1.4.1.429.1.6.13.1.1.15
mandatory read-write
Description: Enables generation of an SNMP trap upon detection of reset by DTE on the specified modem.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enableTrap
(2) = disableAll
(3) = enableLog
(4) = enableAll
MIB Information: mdmTeDialOutCallDur
1.3.6.1.4.1.429.1.6.13.1.1.16
mandatory read-write
Description: Enables the dial out (from the NMC) call duration trap. Default = disable(2).
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enableTrap
(2) = disableAll
(3) = enableLog
(4) = enableAll
MIB Information: mdmTeDialInCallDur
1.3.6.1.4.1.429.1.6.13.1.1.17
mandatory read-write
Description: Enables the dial in (to the NMC) call duration trap. Default = disable(2).
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enableTrap
(2) = disableAll
(3) = enableLog
(4) = enableAll
MIB Information: mdmTePbActive
1.3.6.1.4.1.429.1.6.13.1.1.18
optional read-write
Description: Enables the Packet Bus Active. Default = disable(2).
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enableTrap
(2) = disableAll
(3) = enableLog
(4) = enableAll
MIB Information: mdmTePbLost
1.3.6.1.4.1.429.1.6.13.1.1.19
optional read-write
Description: Enables the Packet Bus Lost trap. Default = disable(2).
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enableTrap
(2) = disableAll
(3) = enableLog
(4) = enableAll
MIB Information: mdmTeDteRingNoAns
1.3.6.1.4.1.429.1.6.13.1.1.20
optional read-write
Description: Enables the Dte Ring No Answer trap. Default = disable(2).
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enableTrap
(2) = disableAll
(3) = enableLog
(4) = enableAll
MIB Information: mdmTePbClockLossEvent
1.3.6.1.4.1.429.1.6.13.1.1.21
mandatory read-write
Description: This object is used to disable the ability for a NAC to report when the packet bus clock has been lost. Default = disableAll(2).
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enableTrap
(2) = disableAll
(3) = enableLog
(4) = enableAll
MIB Information: mdmTePbClockRestoreEvent
1.3.6.1.4.1.429.1.6.13.1.1.22
mandatory read-write
Description: This object is used to disable the ability for a NAC to report when the packet bus clock has been restored. Default = disableAll(2).
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enableTrap
(2) = disableAll
(3) = enableLog
(4) = enableAll
MIB Information: mdmTeInConnAttemptFail
1.3.6.1.4.1.429.1.6.13.1.1.23
mandatory read-write
Description: Enables generation of a SNMP trap upon detection of an inbound connection attempt failure on the specified modem.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enableTrap
(2) = disableAll
(3) = enableLog
(4) = enableAll
MIB Information: mdmTeOutConnAttemptFail
1.3.6.1.4.1.429.1.6.13.1.1.24
mandatory read-write
Description: Enables generation of a SNMP trap upon detection of an outbound connection attempt failure on the specified modem.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enableTrap
(2) = disableAll
(3) = enableLog
(4) = enableAll
MIB Information: mdmTe105ResponderTest
1.3.6.1.4.1.429.1.6.13.1.1.25
mandatory read-write
Description: Enables generation of a SNMP trap upon detection of a 105 responder test on the specified modem.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enableTrap
(2) = disableAll
(3) = enableLog
(4) = enableAll
Copyright © 2000 3Com Corporation.