|
|
|
|
MIB Information: mdmHs
1.3.6.1.4.1.429.1.6.15
MIB Information: mdmHsTable
1.3.6.1.4.1.429.1.6.15.1
not-accessible
Description: A table containing the Hub security parameters accessible in the modem.
MIB Information: mdmHsEntry
1.3.6.1.4.1.429.1.6.15.1.1
not-accessible
Description: There is one entry in this table for each modem entity found in the chassis mib entity table.
MIB Information: mdmHsIndex
1.3.6.1.4.1.429.1.6.15.1.1.1
optional read-only
Description: An index that uniquely identifies the modem to which this row in the Hub Security table pertains. The value of this index matches the value of the index for the corresonding entity in the entity table of the Chassis MIB.
Settings: INTEGER
MIB Information: mdmHsDialInEnable
1.3.6.1.4.1.429.1.6.15.1.1.2
optional read-write
Description: Allows the modem to be configured for dial-in security. Enabling this effectively disables the modem's built-in Link security operation. The default for this object is disabled.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = disable
(2) = allowNoNMC
(3) = refuseNoNMC
(4) = busyOutNoNMC
MIB Information: mdmHsDialOutEnable
1.3.6.1.4.1.429.1.6.15.1.1.3
optional read-write
Description: Allows modems to be configured for dial-out security. Enabling this effectively disables the modem's built-in link security operation. The default value for this object is disabled.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = disable
(2) = refuseNoNMC
(3) = allowNoNMC
MIB Information: mdmHsDtrDcdDelay
1.3.6.1.4.1.429.1.6.15.1.1.4
optional read-write
Description: Allows configuration of the time delay (in 100ths of a second) between reciept of DTR and assertion of DCD when the user on an incomming security call has successfully compleated the security dialog. This object only applies to modems using an RS232 like interface.
Settings: INTEGER
Syntax Ref. Type: RANGE
0 = 255
MIB Information: mdmHsDtrDsrDelay
1.3.6.1.4.1.429.1.6.15.1.1.5
optional read-write
Description: Allows configuration of the delay (in 100ths of a second) between detection of DTR and assertion of DSR when an incomming security call has completed security negotiation successfully.
Settings: INTEGER
Syntax Ref. Type: RANGE
0 = 255
Copyright © 2000 3Com Corporation.