|
|
|
|
MIB Information: sdhTe
1.3.6.1.4.1.429.1.46.8
MIB Information: sdhTeTable
1.3.6.1.4.1.429.1.46.8.1
not-accessible
Description: The SDH Line Level Trap Table.
MIB Information: sdhTeEntry
1.3.6.1.4.1.429.1.46.8.1.1
not-accessible
Description: An entry in the SDH Line Level Trap Table.
MIB Information: sdhTeIndex
1.3.6.1.4.1.429.1.46.8.1.1.1
mandatory read-only
Description: Index for the Trap Table at the SDH Line Level.
Settings: INTEGER
MIB Information: sdhSectionOrderTE
1.3.6.1.4.1.429.1.46.8.1.1.2
mandatory read-write
Description: Enable the generation of an SNMP trap upon detection of Section alarm condition on the specified SDH Converter Card.0x0001 = enableTrap0x0002 = disableAll 0x0003 = enableLog0x0004 = enableAll
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enableTrap
(2) = disableAll
(3) = enableLog
(4) = enableAll
MIB Information: sdhAU1HighOrderTE
1.3.6.1.4.1.429.1.46.8.1.1.3
mandatory read-write
Description: Enable the generation of an SNMP trap upon detection of High Path AU#1 alarm condition on the specified SDH Converter Card.0x0001 = enableTrap0x0002 = disableAll0x0003 = enableLog0x0004 = enableAll
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enableTrap
(2) = disableAll
(3) = enableLog
(4) = enableAll
MIB Information: sdhAU2HighOrderTE
1.3.6.1.4.1.429.1.46.8.1.1.4
mandatory read-write
Description: Enable the generation of an SNMP trap upon detection of High Path AU#2 alarm condition on the specified SDH Converter Card.0x0001 = enableTrap0x0002 = disableAll0x0003 = enableLog 0x0004 = enableAll .
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enableTrap
(2) = disableAll
(3) = enableLog
(4) = enableAll
MIB Information: sdhAU3HighOrderTE
1.3.6.1.4.1.429.1.46.8.1.1.5
mandatory read-write
Description: Enable the generation of an SNMP trap upon detection of High Path AU#3 alarm condition on the specified SDH Converter Card. 0x0001 = enableTrap0x0002 = disableAll0x0003 = enableLog 0x0004 = enableAll .
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enableTrap
(2) = disableAll
(3) = enableLog
(4) = enableAll
MIB Information: sdhAU1LowOrderTE
1.3.6.1.4.1.429.1.46.8.1.1.6
mandatory read-write
Description: Enable the generation of an SNMP trap upon detection of Low Path alarm which is subordinate to High Path AU#1 condition on the specified SDH Converter Card.0x0001 = enableTrap 0x0002 = disableAll 0x0003 = enableLog 0x0004 = enableAll .
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enableTrap
(2) = disableAll
(3) = enableLog
(4) = enableAll
MIB Information: sdhAU2LowOrderTE
1.3.6.1.4.1.429.1.46.8.1.1.7
mandatory read-write
Description: Enable the generation of an SNMP trap upon detection of Low Path alarm which is subordinate to High Path AU#2 condition on the specified SDH Converter Card.0x0001 = enableTrap 0x0002 = disableAll 0x0003 = enableLog 0x0004 = enableAll .
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enableTrap
(2) = disableAll
(3) = enableLog
(4) = enableAll
MIB Information: sdhAU3LowOrderTE
1.3.6.1.4.1.429.1.46.8.1.1.8
mandatory read-write
Description: Enable the generation of an SNMP trap upon detection of Low Path alarm which is subordinate to High Path AU#3 condition on the specified SDH Converter Card.0x0001 = enableTrap 0x0002 = disableAll 0x0003 = enableLog 0x0004 = enableAll
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enableTrap
(2) = disableAll
(3) = enableLog
(4) = enableAll
MIB Information: sdhApsSwitchTE
1.3.6.1.4.1.429.1.46.8.1.1.9
mandatory read-write
Description: Enable the generation of an SNMP trap upon detection of APS switch conditionon the specified SDH Converter Card. 0x0001 = enableTrap0x0002 = disableAll0x0003 = enableLog0x0004 = enableAll
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enableTrap
(2) = disableAll
(3) = enableLog
(4) = enableAll
MIB Information: sdhTransNameChgTE
1.3.6.1.4.1.429.1.46.8.1.1.10
mandatory read-write
Description: Enable the generation of an SNMP trap upon detection of transmission name change condition on the specified SDH Converter Card.0x0001 = enableTrap0x0002 = disableAll 0x0003 = enableLog 0x0004 = enableAll
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enableTrap
(2) = disableAll
(3) = enableLog
(4) = enableAll
MIB Information: sdhApsCableFaultTE
1.3.6.1.4.1.429.1.46.8.1.1.11
mandatory read-write
Description: Enable the generation of an SNMP trap upon detection of APS cable failure condition on the specified SDH Converter Card.0x0001 = enableTrap0x0002 = disableAll0x0003 = enableLog0x0004 = enableAll
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enableTrap
(2) = disableAll
(3) = enableLog
(4) = enableAll
MIB Information: sdhOthSidePowerOffTE
1.3.6.1.4.1.429.1.46.8.1.1.12
mandatory read-write
Description: Enable the generation of an SNMP trap upon detection of Power supply failure of cardss in the order side condition on the specified SDH Converter Card.0x0001 = enableTrap 0x0002 = disableAll 0x0003 = enableLog0x0004 = enableAll
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enableTrap
(2) = disableAll
(3) = enableLog
(4) = enableAll
MIB Information: sdhOthSideCardFaultTE
1.3.6.1.4.1.429.1.46.8.1.1.13
mandatory read-write
Description: Enable the generation of an SNMP trap upon detection of Heart Beat check in the other side card condition on the specified SDH Converter Card. 0x0001 = enableTrap0x0002 = disableAll 0x0003 = enableLog 0x0004 = enableAll
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enableTrap
(2) = disableAll
(3) = enableLog
(4) = enableAll
MIB Information: sdhEquipFailureTE
1.3.6.1.4.1.429.1.46.8.1.1.14
mandatory read-write
Description: Enable the generation of an SNMP trap upon detection of EquipmentFailure condition on the specified SDH Converter Card. 0x0001 = enableTrap0x0002 = disableAll 0x0003 = enableLog 0x0004 = enableAll
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enableTrap
(2) = disableAll
(3) = enableLog
(4) = enableAll
Copyright © 2000 3Com Corporation.