|
|
|
|
MIB Information: t1hCmd
1.3.6.1.4.1.429.1.26.3
MIB Information: t1hCmdTable
1.3.6.1.4.1.429.1.26.3.1
not-accessible
Description: The T1 card command table contains an entry for each of the manageable T1 card in the chassis. It provides a means through which to take specific actions on the T1 card in the chassis. The number of entries in this table is given by the value of t1hIdNumber.
MIB Information: t1hCmdEntry
1.3.6.1.4.1.429.1.26.3.1.1
not-accessible
Description: There is one T1 card command entry per T1 card in the chassis.
MIB Information: t1hCmdIndex
1.3.6.1.4.1.429.1.26.3.1.1.1
mandatory read-only
Description: A unique value for each T1 card in the chassis. The value of this object matches the value of the index of the corresponding T1 card's entry in the entity table of the chassis MIB.
Settings: INTEGER
MIB Information: t1hCmdMgtStationId
1.3.6.1.4.1.429.1.26.3.1.1.2
mandatory read-write
Description: This object is a generic read-write variable that a Management Station (MS) can use to guarantee that the results from a command are the results of a command issued by that specific MS. Each MS must SET a unique value to this object when doing commands and GET the value of this object together with t1hCmdReqId and t1hCmdResult to detect interference from other MSs.
Settings: OCTET STRING
Syntax Ref. Type: SIZE
0 = 8
MIB Information: t1hCmdReqId
1.3.6.1.4.1.429.1.26.3.1.1.3
mandatory read-only
Description: This object contains the value of the request-id field in the SNMP PDU which invoked the current or most recent command or test on this T1 card. If the request-id is unknown or undefined this object contains the value zero.
Settings: INTEGER
MIB Information: t1hCmdFunction
1.3.6.1.4.1.429.1.26.3.1.1.4
mandatory read-write
Description: This object contains a value which describes the command which is being invoked.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = noCommand
(2) = restoreT1E1AndMdmDefaults
(3) = restoreT1E1FromDefault
(4) = restoreMdmFromDefault
(5) = saveT1E1AndMdmNvram
(6) = saveT1E1Nvram
(7) = saveMdmNvram
(8) = restoreT1E1AndMdmNvram
(9) = restoreT1E1Nvram
(10) = restoreMdmNvram
(11) = softwareReset
(12) = restoreDefaultUIPassword
(13) = restorecfg1todeflt
(14) = restorecfg2todeflt
(15) = restorecfg3todeflt
(16) = restorecfg4todeflt
(17) = saveCfg1toNvram
(18) = saveCfg2toNvram
(19) = saveCfg3toNvram
(20) = saveCfg4toNvram
(21) = restoreCfg1FromNvram
(22) = restoreCfg2FromNvram
(23) = restoreCfg3FromNvram
(24) = restoreCfg4FromNvram
(25) = refreshCfg1Chans
(26) = refreshCfg2Chans
(27) = refreshCfg3Chans
(28) = refreshCfg4Chans
(29) = softReboot
(30) = softRebootCancel
(1) = force
(2) = noForce
MIB Information: t1hCmdParam
1.3.6.1.4.1.429.1.26.3.1.1.6
mandatory read-write
Description: This object contains parameters that are specific to the particular command being issued. In some cases there will be no addtional parameters required.
Settings: OCTET STRING
Syntax Ref. Type: SIZE
0 = 24
MIB Information: t1hCmdResult
1.3.6.1.4.1.429.1.26.3.1.1.7
mandatory read-only
Description: This object contains the result of the most recently requested command or test or the value none(1) if no commands have been requested since the last reset.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = none
(2) = success
(3) = inProgress
(4) = notSupported
(5) = unAbleToRun
(6) = aborted
(7) = failed
MIB Information: t1hCmdCode
1.3.6.1.4.1.429.1.26.3.1.1.8
mandatory read-only
Description: The value of this object upon commad completion indicates a futher description of what went wrong if the command was unsuccessful. In the case of tests a bit mapped result of each of the sub-tests performed can be found in the status table.
Settings: INTEGER
Syntax Ref. Type: ENUM
MIB Information: t1hCmdForce
1.3.6.1.4.1.429.1.26.3.1.1.5
mandatory read-write
Description: In some cases the T1 card may be in a state such that certain commands could adversely affect connections. In such cases a command request with this object not present or set to noForce will result in a warning. If the operator elects to ignore such warnings this object can be set to force in a subsequent issue of the command to cause the command to be carried out regardless of its potentially hazzardous effects.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = noError
(2) = unable
(6) = unrecognizedCommand
(8) = slotEmpty
(12) = noResponse
(20) = unsupportedCommand
(22) = deviceDisabled
(25) = testFailed
(58) = userInterfaceActive
(73) = pendingSoftwareDownload
Copyright © 2000 3Com Corporation.