|
|
|
|
MIB Information: t1hTe
1.3.6.1.4.1.429.1.26.4
MIB Information: t1hTeTable
1.3.6.1.4.1.429.1.26.4.1
not-accessible
Description: The trap table containing an enable for each that the card is capable of generating. Some of these events occur often and traps may flood the network if care is not taken to avoid such conditions. These traps should be enabled sparingly.
MIB Information: t1hTeEntry
1.3.6.1.4.1.429.1.26.4.1.1
not-accessible
Description: There is one entry for each HiPer DSP card in the chassis.
MIB Information: t1hTeIndex
1.3.6.1.4.1.429.1.26.4.1.1.1
mandatory read-only
Description: A unique value for each HiPer DSP card in the chassis. The value of this object matches the value of the index of the corresponding HiPer DSP card's entry in the entity table of the chassis MIB.
Settings: INTEGER
MIB Information: t1hTeResetByDTE
1.3.6.1.4.1.429.1.26.4.1.1.2
mandatory read-write
Description: Enables generation of an SNMP trap upon detection of reset by DTE on the modems in the card.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enableTrap
(2) = disableAll
(3) = enableLog
(4) = enableAll
MIB Information: t1hTeEnfasLinkUp
1.3.6.1.4.1.429.1.26.4.1.1.3
mandatory read-write
Description: The trap enable for ENFAS link coming up trap. Default is disable.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enableTrap
(2) = disableAll
(3) = enableLog
(4) = enableAll
MIB Information: t1hTeEnfasLinkDown
1.3.6.1.4.1.429.1.26.4.1.1.4
mandatory read-write
Description: The trap enable for ENFAS link coming down trap. Default is disable.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enableTrap
(2) = disableAll
(3) = enableLog
(4) = enableAll
Copyright © 2000 3Com Corporation.