|
|
|
|
MIB Information: t1hStat
1.3.6.1.4.1.429.1.26.5
MIB Information: t1hStatTable
1.3.6.1.4.1.429.1.26.5.1
not-accessible
Description: The Status table contains an entry for each HiperDSP card in the chassis.
MIB Information: t1hStatEntry
1.3.6.1.4.1.429.1.26.5.1.1
not-accessible
Description: There is one entry for each HiPer DSP card in the chassis.
MIB Information: t1hStatIndex
1.3.6.1.4.1.429.1.26.5.1.1.1
mandatory read-only
Description: A unique value for each HiPer DSP card in the chassis. The value of this object matches the value of the index of the corresponding HiPer DSP card's entry in the entity table of the chassis MIB.
Settings: INTEGER
MIB Information: t1hStatSigPBusTxPktOkCnt
1.3.6.1.4.1.429.1.26.5.1.1.2
mandatory read-only
Description: The number of successful packets transmitted over the signaling packet bus connection.
Settings: Counter
MIB Information: t1hStatSigPBusTxPktFldCnt
1.3.6.1.4.1.429.1.26.5.1.1.3
mandatory read-only
Description: The number of packets failed to transmit over the signaling packet bus connection.
Settings: Counter
MIB Information: t1hStatSigPBusRxPktOkCnt
1.3.6.1.4.1.429.1.26.5.1.1.4
mandatory read-only
Description: The number of successful packets received over the signaling packet bus connection.
Settings: Counter
MIB Information: t1hStatSigPBusRxPktRjtCnt
1.3.6.1.4.1.429.1.26.5.1.1.5
mandatory read-only
Description: The number of packets rejected by the HiPerDSP message handling application.
Settings: Counter
MIB Information: t1hStatSigPBusConnState
1.3.6.1.4.1.429.1.26.5.1.1.6
mandatory read-only
Description: The state of the signaling packet bus connection to the SS7 interface NAC. The HiperDSP supports the following states: closed opened ready and loopback. The loopback state means the HiperDSP has been requested over the E-NFAS packet bus link to loopback all of its E-NFAS signaling channel received data. It will stay in this state until the other SS7 NAC sends an E-NFAS control message to remove the loopback on this signaling connection
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = closed
(2) = opening
(3) = opened
(4) = configuring
(5) = ready
(6) = closing
(7) = loopback
MIB Information: t1hStatEnfasLinkDownCause
1.3.6.1.4.1.429.1.26.5.1.1.7
mandatory read-only
Description: The reason for the E-NFAS signaling link going down. DisCmd: A DISC command was received over the packet bus signaling link. NACRemoval: A chassis awareness message indicated that the NAC connected to the E-NFAS link has been removed.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = none
(2) = discCmd
(3) = nacRemoval
MIB Information: t1hStatOperationalTimeRef
1.3.6.1.4.1.429.1.26.5.1.1.8
mandatory read-only
Description: This object specifies the operational timing reference. No default.
Settings: INTEGER
Syntax Ref. Type: ENUM
(255) = undefined
(254) = holdover
(253) = freerun
(1) = span1
(2) = span2
(3) = span3
(4) = span4
MIB Information: t1hStatSoftRebootStatus
1.3.6.1.4.1.429.1.26.5.1.1.9
mandatory read-only
Description: This object specifies the Soft Reboot state: Inactive (1) Inprogress(2)
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = notSupported
(2) = inActive
(3) = inProgress
MIB Information: t1hStatCallsConn
1.3.6.1.4.1.429.1.26.5.1.1.10
mandatory read-only
Description: This object specifies Number of calls connected
Settings: INTEGER
MIB Information: t1hStatSoftRebootTime
1.3.6.1.4.1.429.1.26.5.1.1.11
mandatory read-only
Description: This object specifies Number of Minutes remaining until reboot.
Settings: INTEGER
Copyright © 2000 3Com Corporation.