|
|
|
|
MIB Information: wgwCmd
1.3.6.1.4.1.429.1.17.1
MIB Information: wgwCmdTable
1.3.6.1.4.1.429.1.17.1.1
not-accessible
Description: The command table contains an entry for each Wireless Gateway installed in a chassis. It provides a means for processing actions requested by the management console.
MIB Information: wgwCmdEntry
1.3.6.1.4.1.429.1.17.1.1.1
not-accessible
Description: There is one Wireless Gateway Card Command entry per Wireless Gateway Card in the chassis.
MIB Information: wgwCmdIndex
1.3.6.1.4.1.429.1.17.1.1.1.1
mandatory read-only
Description: The index value which uniquely identifies the Wireless Gateway to which this entry is applicable. The value corresponds to the index of the corresponding Wireless Gateway in the entity table of the chassis.
Settings: INTEGER
MIB Information: wgwCmdMgtStationId
1.3.6.1.4.1.429.1.17.1.1.1.2
mandatory read-write
Description: This object is a generic read-write variable that a Management Station (MS) can use to guarantee that the results from a given command are the results of a command issued by that specific MS. Each MS must SET a unique value to this object when doing commands and GET the value of this object together with x25gwCmdReqId and x25gwCmdResult to detect interference from other MSs.
Settings: OCTET STRING
Syntax Ref. Type: SIZE
0 = 8
MIB Information: wgwCmdReqId
1.3.6.1.4.1.429.1.17.1.1.1.3
mandatory read-only
Description: This object contains the value of the request-id field in the SNMP PDU which invoked the current or most recent command or test on this Wireless Gateway Card. If the request-id is unknown or undefined this object contains the value zero.
Settings: INTEGER
MIB Information: wgwCmdFunction
1.3.6.1.4.1.429.1.17.1.1.1.4
mandatory read-write
Description: This object contains a value which describes the command which is being invoked.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = noCommand
(2) = saveToNVRAM
(3) = nonDisruptSelfTest
(4) = softwareReset
MIB Information: wgwCmdForce
1.3.6.1.4.1.429.1.17.1.1.1.5
mandatory read-write
Description: In certain cases Wireless Gateway may be in a state where commands could adversely affect connections. In such cases a command with this object not set to noForce will result in a warning.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = force
(2) = noForce
MIB Information: wgwCmdParam
1.3.6.1.4.1.429.1.17.1.1.1.6
mandatory read-write
Description: This object contains parameters that are specific to the particular command being issued. In some cases there will be no aditional parameters required.
Settings: OCTET STRING
MIB Information: wgwCmdResult
1.3.6.1.4.1.429.1.17.1.1.1.7
mandatory read-only
Description: This object contains the result of the most recently requested command or test or the value none(1) if no commands have been requested since the last reset.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = none
(2) = success
(3) = inProgress
(4) = notSupported
(5) = unAbleToRun
(6) = aborted
(7) = failed
MIB Information: wgwCmdCode
1.3.6.1.4.1.429.1.17.1.1.1.8
mandatory read-only
Description: The Value of this object is value of this object is noError(1) if the command was successful and indicates a further description of what went wrong if it was unsuccessful.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = noError
(2) = unable
(6) = unrecognizedCommand
(8) = slotEmpty
(12) = noResponse
(20) = unsupportedCommand
(25) = testFailed
(73) = pendingSoftwareDownload
Copyright © 2000 3Com Corporation.