|
|
|
|
MIB Information: wgwCfg
1.3.6.1.4.1.429.1.17.2
MIB Information: wgwCfgTable
1.3.6.1.4.1.429.1.17.2.1
not-accessible
Description: A table of configurable parameters specific to the WAS Gateway NAC.
MIB Information: wgwCfgEntry
1.3.6.1.4.1.429.1.17.2.1.1
not-accessible
MIB Information: wgwCfgIndex
1.3.6.1.4.1.429.1.17.2.1.1.1
mandatory read-only
Description: A unique value for each Wireleass Gateway NAC in the system based on the values in the entity table in the USR extensions to the chassis mib.
Settings: INTEGER
MIB Information: wgwCfgSysDate
1.3.6.1.4.1.429.1.17.2.1.1.2
mandatory read-write
Description: This object is to configure the Date of the Wireless Gateway Nac.
Settings: DisplayString
Syntax Ref. Type: SIZE
5 = 8
MIB Information: wgwCfgSysTime
1.3.6.1.4.1.429.1.17.2.1.1.3
mandatory read-write
Description: This object is to configure the Time of the Wireless Gateway Nac.
Settings: DisplayString
Syntax Ref. Type: SIZE
5 = 8
MIB Information: wgwCfgBusyTone
1.3.6.1.4.1.429.1.17.2.1.1.4
mandatory read-write
Description: This object is used to configure the busy tone duration in the Wireless Gateway NAC. Default = 0
Settings: INTEGER
MIB Information: wgwCfgRineToneEna
1.3.6.1.4.1.429.1.17.2.1.1.5
mandatory read-write
Description: This object is to enable/disable the ring tone. default = disable
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = enable
(2) = disable
MIB Information: wgwCfgSelfTestResult
1.3.6.1.4.1.429.1.17.2.1.1.6
mandatory read-only
Description: This object returns the results of the most recent self test performed by the WAS Gateway NAC. If all tests have passed a 0 is returned.
Settings: INTEGER
MIB Information: wgwCfgPbMasterClk
1.3.6.1.4.1.429.1.17.2.1.1.7
mandatory read-write
Description: This object is used to disable the ability for a NAC to act as a packet bus clock master. Default = enable(2).
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = notSupported
(2) = enable
(3) = disable
MIB Information: wgwCfgPbClkStatus
1.3.6.1.4.1.429.1.17.2.1.1.8
mandatory read-only
Description: This object defines the current status of the packet bus clock.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = notSupported
(2) = clockMaster
(3) = clockSlave
(4) = noClockPresent
Copyright © 2000 3Com Corporation.