|
|
|
|
MIB Information: x25gwId
1.3.6.1.4.1.429.1.11.1
MIB Information: x25gwIdTable
1.3.6.1.4.1.429.1.11.1.1
not-accessible
Description: A table that contains information that identifies the hardware and software that make up the specified X.25 card.
MIB Information: x25gwIdEntry
1.3.6.1.4.1.429.1.11.1.1.1
not-accessible
Description: There is one entry in this table for every X.25 card in the chassis.
MIB Information: x25gwIdIndex
1.3.6.1.4.1.429.1.11.1.1.1.1
mandatory read-only
Description: An index that uniquely identifies the X.25 card for which this row in the table pertains. The value of this index matches the value of the index for the corresponding entity in the entity table of the chassis MIB.
Settings: INTEGER
MIB Information: x25gwIdHardwareSerNum
1.3.6.1.4.1.429.1.11.1.1.1.2
mandatory read-only
Description: The X.25 card's hardware serial number as stored in EEPROM.
Settings: DisplayString
MIB Information: x25gwIdHardwareRev
1.3.6.1.4.1.429.1.11.1.1.1.3
mandatory read-only
Description: The hardware revision of the specified X.25 card as stored in its EEPROM.
Settings: DisplayString
MIB Information: x25gwIdSoftwareRev
1.3.6.1.4.1.429.1.11.1.1.1.4
mandatory read-only
Description: The revision of the software being executed in the specified X.25 card.
Settings: DisplayString
MIB Information: x25gwIdCpuType
1.3.6.1.4.1.429.1.11.1.1.1.5
mandatory read-only
Description: Defines the type of CPU present on the X.25 Gateway NAC.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = i80386
(2) = i80486
MIB Information: x25gwIdRamInstalled
1.3.6.1.4.1.429.1.11.1.1.1.6
mandatory read-only
Description: Specifies the amount of DRAM installed on the X.25 Gateway NAC in Kbytes.
Settings: INTEGER
MIB Information: x25gwIdFlashInstalled
1.3.6.1.4.1.429.1.11.1.1.1.7
mandatory read-only
Description: Specifies the amount of Flash Rom installed on the X.25 Gateway NAC in Kbytes.
Settings: INTEGER
MIB Information: x25gwIdOperCfgSts
1.3.6.1.4.1.429.1.11.1.1.1.8
mandatory read-only
Description: Informs the operator as to whether the operational parameters are the NVRAM parameters or if the administrative parameters have been saved to NVRAM.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = operNvram
(2) = adminChanged
(3) = adminNvram
MIB Information: x25gwIdSelfTestResult
1.3.6.1.4.1.429.1.11.1.1.1.9
mandatory read-only
Description: Displays the results of the most resent self test performed by the X.25 Gateway NAC. If all tests have passed a value of 0 is returned.
Settings: INTEGER
MIB Information: x25gwIdMgmtConnect
1.3.6.1.4.1.429.1.11.1.1.1.10
mandatory read-only
Description: Indicates the current status of X.25 gateway user interface.
Settings: INTEGER
Syntax Ref. Type: ENUM
(1) = inactive
(2) = active
Copyright © 2000 3Com Corporation.